Christmas Tree Ornament: Instructions Step 1: Print out the Christmas Tree Ornament on card stock or regular paper. Cut out the tree and fold (away from you) along all four indicated lines.
Step 3: Spread glue on the green side of the tab. Form the tree by gluing the tab to the blank side of the last panel. Tip: Start at the base of the tree and work your way up, to insure the base is level.
Page 2 of 2 Step 2: Cut a piece of ribbon or string (the thinner the better) about eight inches long. Create a loop with the string and tape the ends together. Using the diagram as a guide, tape the end of the loop to the blank side of the tree so that the loop sticks out of the top of the tree.
