Company Profile
ISO 9001: 2000 ACSMA082
Copyright @ 2008 Delta Region Engineering. All rights reserve
Table of Contents Contents 1. Introduction 2. Agent/Distributor 3. Quality Philosophy 4. Shop Inspection Procedure 5. HSE Policy 6. Company Information 7. Organization Chart 8. Well Head Control Panel (WHCP) procedures and documentations 9. Previous Jobs Experience 10. Project Photographs 11. Letter of Appointment/Support 12. Standards and Approvals
2
1. Introduction Delta-Region Engineering Sdn.Bhd. is an established oil and gas company that serves the oil, gas, petrochemical, mining and power industries in the Asia Pacific Region. We provide excellent services, solutions and a wide range of engineered products as well as after sales support to our clients. Our priority is to ensure equipment integrity and customer satisfaction. This is delivered through strong relationships with our manufacturers and a high level of specialized local support. We have excellent track record of installation and support of the equipment range and have a proven ability to meet and exceed customer’s expectations. Our clients include major multinational operators and national oil companies such as Shell Sarawak Berhad, Shell Sabah Berhad, Shell China, Petronas, TOTAL Mynmar, Murphy Oil, MLNG, etc. Being a service-oriented company, we place a strong emphasis in our customer needs and requirements. We always commit to provide our customers with the highest quality products and excellent service supports. We deliver our products on time, with quality, at the right cost. Our company has a group of experienced professionals in the oil and gas industries. They are supported by a team of experienced engineers and dedicated staff.
3
We are proud to be the agents/distributors for various reputable manufacturers
worldwide
for
supplying
valves,
instrument
panels,
downhole tools, switchboard, gauges, flame arrestors, etc. We also have excellent
contacts
manufacturers
and
who
are
business capable to
relationship supply
the
with
stockists
following
and
products
/equipment to meet client's specification with competitive prices: - Mechanical pipe fittings - Seals, line pipes - Structural steel, beams and columns - Plates, rods and bars - Marine equipment - Rotating equipment Besides product sales and engineering services, we provide manpower to serve the oil and gas industries around the world. Our scope of manpower supply consists of engineers involved in Engineering, Procurement, Construction
and
Commissioning
(EPCC) phases
in
projects and
also includes other categories of skilled technicians, competent/certified workers and specialists such as E&I technicians, crane operators, production and maintenance crews, certified ASME welder, crews in well services, well completion, workover, well testing, drilling, marine operations, catering services and etc. Inline with our emphasis on quality of work, we are proud to be accredited with ISO 9001: 2000 by ACS Certification body since Jun 2008.
4
2. Agent/Distributor We are proud to be agent/distributors for the following worldwide recognized manufacturers:
Taylor Valve Technology, Inc. has been engineering and manufacturing world class products through creativity and innovation.
Leeds Valve is the world leader in supplying butterfly valves for niche applications in oil and gas industrial. Valve types include swingclear, stepseat, low noise/anti cavitation, refractory lined, reduced port, twin disc and also more conventional low noise/ anti cavitation, high performance butterfly valve.
Taylor Valve products consist of safety relief valves, flow control valves/chokes, steam valves, vapor valves, regulators, level controllers and various pressure reading devices.
www.leeds-valve.com www.taylorvalve.com
DFT has been making the in-line check valves for over 50 years. It started with a customer’s need for a small metal-seated check valve that could be installed in any position while providing tight shut-off.
Advanced Component Techonology is a well established supplier of electro-hydraulic actuators and hydraulic components to oil & gas, power generation, nuclear, marine, industrial, and mobile marketplaces throughout the world.
Today, DFT products range from a Basic Check® valve, Excalibur® valve, DLC® valve, SCV® valve, GLC® valve, WLC® valve, PDC® valve, HI-100 control valve, UltraTrol® control valve or Uniflo valve.
Besides actuators, ACT also provides brakes, gearboxes, motors and Kawasaki pumps. www.adcomtec.co.uk
www.dft-valves.com 5
2. Agent/Distributor
CSI International, Inc. has been serving the process industry for over 35 years. CSI offers Reyco Safety Relief Valves (parts interchangeable with Lonergan) and Global Control Valves (parts interchangeable with Fisher). In addition, CSI International also provides thermometer, thermocouple, pressure gauge and level switch www.csiionline.com
China Xi'an Fengyang Petroleum Equipments Co.,Ltd (FYPE) specializes in the supply of a range of quality manufactured oilfield products . These include Downhole Tools , Petroleum Pipes, Wellhead Equipments, Drilling Rigs and Components as well as an extensive range of Mud Pumps. Additionally FYPE are able to offer: Stabilizer Forgings, Drill Collars, Kellys, Heavy Weight Drill Pipes, OCTG , Line Pipe and Casings. http://www.fy-oilfield.com/
Nantong Strong World Fiber Reinforced Plastic Products Co., LTD. is a scientific enterprise specialized in manufacturing and developing molded frp grids, pultruded products and pultruded profiles. http://www.strongrate.com/strongri d/english/
Tenaga Kenari specializes in several types of Switchboard panel products, namely Main Switchboards, SubSwitchboard, Distribution Board, AMF Control Panel, SESCO Metering Panel, Starter Control Panel, Water Treatment Control Panels and some other PLC Control Panels.
2. Agent/Distributor
Severe Service Technology, Inc., is a premier manufacturer of metal and ceramic seated ball valves for severe and lethal environments.
AMC design and fabricate engineering process equipment like pressure vessels, heat exchangers, filters & coalesces, heat recovery steam generator, storage tanks, scrubbers, chemical injection skids, other process and utilities skids in oil and gas, petrochemical and power industrial.
http://www.sstvalve.com/
http://www.amcsb.com.my
Marco Specialty Steel, Inc. is a steel service center specializing in Wire Cloth, Perforated Metal, Expanded Metal, Bar Grating, Fiberglass Grating, Grip Strut® Saftey Grating, Perf-O Grip® Grating, GrateLock® Grating and Hex Metal.
Valveworks USA offers gate valves, bolt dual valve, ring gasket, ball valves and also wellhead products. All materials supplied by Valveworks forging and casting facilities are proven to meet the required quality specifications. All chemicals and physicals are quality assured.
Marco Specialty Steel offer custom manufacturing and fabrication of all our products.
http://www.valveworksusa.com http://www.marcospecialtysteel.com
7
2. Agent/Distributor
Vanasa Multigas is specialized in designing, engineering, manufacturing, and servicing gas metering and measuring system. Vanasa Multigas design and manufacture gas metering stations, city gate stations and pressure reduction/regulation skids according to the clients’ requirements and industrial standards.
ATV provides flow control solutions to the most demanding requirements of the Oil & Gas upstream and downstream industry. ATV offers downstream and upstream products such as through conduit slab gate valve, through conduit double expending gate valve, top entry ball valve, swing check valve, Axial flow control valve, dual plate check valve, hydraulic actuators, rotary gate valve, rising stem ball valve, subsea valves, actuators and HIPPS.
Vanasa Multigas also offers filter separators, launchers and receivers, as well as indirect fired gas heaters for gas pipelines industrial.
www.atvspa.com
Corporation Win is specialized in the manufacture of pressure and vacuum relief valves and flame arrestors, as well as safety protection devices for liquid petroleum and petroleum products storage tanks, waste gas burning system for sewage treatment, nitrogen blanketing systems for automatic nitrogen sealing devices, explosive, venting systems, and other related products.
AES was incorporated in 1987 with corporate headquarters, manufacturing and warehousing facilities located in Houston, Texas. AES products are certified to API 6A and API 6D, while their facilities is certified to API Q1. AES valves are available in all ANSI and API pressure classes and virtually any metallurgy required.
http://www.corpwin.com/
http://www.aesvalves.com/ 8
3. Quality philosophy To deliver highest quality of work that meet clients’ requirements. Always ensure the correct and up to date information is been used. To liaise with client for joint inspection and joint acceptance. Constantly instill quality awareness among employees.
Delta-Region always strives to achieve highest quality of works, without compromising the health and safety of our staff, clients as well as environments. We ensure our working environment is free of hazard.
9
4. Shop Inspection Procedure Delta-Region is committed to deliver highest quality of works to customers. We have a comprehensive shop inspection procedure as attached below to govern the quality of materials to be purchased as well as inspection and testing plan.
1. SCOPE The procedure outlines the execution procedure of quality control work for the equipment and materials to be purchased and fabricated for projects and covers required inspection and testing plan on the Project Procedure. 2. DEFINITIONS Company shall mean Delta-Region Engineering Sdn Bhd. Contractor shall mean a registered business entity contracted to implement a project either as EPCC, an installer or otherwise specified. Vendor shall mean a firm / company who is awarded the contract to supply goods, services and material to the Company. Authorized Inspection Agency (AIA) shall mean the firm / company who is authorized by the company or its representatives to perform the inspection for certification purpose as per the company’s requirement
10
3. RESPONSIBILITIES 3.1 Local Inspection All shop inspection for contractors, vendors, manufacturers will be managed and handled directly by the company. 3.2 Overseas Inspection For overseas Vendors, basically all shop inspection shall be managed and handled by company’s office. However, for the critical equipment / materials, Contractor will appoint inspection agency in the country (or area) of the equipment / materials are being fabricated to perform the inspection activities on behalf of Contractor. The appointed inspection agency executes the inspection activities in accordance with the instruction given by the QC Representative of the Company. Company QC representative shall witness the testing should it be deemed necessary. 3.3 Contractor’s Inspection Contractor’s inspection shall be performed by the Company’s engineer and / or inspector from appointed inspection agency. 4. PROCEDURE FOR INSPECTION 4.1 General Contractor, Vendor and / or their Sub-vendors shall inspect the materials / equipment to be supplied at any time when necessary and in accordance
11
with the ‘List of Inspection Items’ as mentioned in requisition. Vendor shall ensure
that
requirements
the
quality
of
purchase
of
materials/equipment
order,
specifications
comply and
with
other
the
related
documents. Company shall perform the adequate inspection and test to ensure that the equipment and materials conform to the requirements of the purchase order, specifications and other related documents and to maintain good quality and workmanship of materials and equipment. For equipment and materials which are not covered by requirement of the ‘List of Inspection Item’ as mentioned on each requisition, Company will request Vendor to submit their standard inspection procedure and decide whether appointed inspector or representative will witness inspection and test after reviewing the document. Company has the right to inspect materials and equipment being fabricated in accordance with the Inspection and Test Plan. If any inspection shows that any materials and equipment have not been fabricated in accordance with the requirements of purchase order, specifications and other related documents, Vendor shall immediately correct the defects and shall repeat the inspection and / or test to prove that the defects have been eliminated. The extend of examination will be specified in Repair Procedure in which shall be prepared by Vendor and approved by Malaysian Inspector and COMPANY before commencement of repairing work.
12
4.2 Government Inspection Company will assign Authorized Inspection Agency to implement Malaysian Government inspection in line with the country’s requirements. Under the coordination of COMPANY, Authorized Inspection Agency shall be responsible for all inspection required by the rules and regulations of Malaysia. Basically, inspection that will be performed by approved authorities and / or Authorized Inspection Agency as specified under the country’s requirements. 4.3 Inspection and Test Plan (ITP) Contractors and Vendor shall prepare ITP and submit it to Company. Then Contractor and vendors shall issue to COMPANY for comments and notification of their own inspection requirement (i.e. witness point, hold point, etc). Similarly, COMPANY shall submit ITP to client and Authorized Inspection Agency for comments and notifications of their own inspection requirements. COMPANY will forward the marked-up ITP to Contractor and vendor and a new ITP shall be forwarded to the company for resubmission. 4.4 Pre-Inspection Meeting (PIM) Company will hold a pre-inspection meeting with Vendor for major equipment and materials in order to assure that Vendor’s quality control and inspection method conform to the requirement of the purchase order, specifications and other related documents and to maintain good quality and workmanship of equipment and materials and also to establish the
13
communications channel with Vendor. Company will be notified of the PIM schedule and has the option to attend if considered necessary. In the event that the equipment shall be certified by Authorized Inspection Agency, COMPANY shall notify Authorized Inspection Agency and Authorized Inspection Agency shall confirm whether they will attend the PIM. 4.5 INSPECTION APPLICATION FROM VENDOR Vendor shall submit ‘Monthly Inspection Schedule’ to Contractor on the 27th day of each month for the coming next month inspection schedule. Vendor shall submit ‘Application for Inspection’ to Company at least thirty (30) days prior to the actual inspection or test date for overseas inspection and sixteen (16) days in advance for domestic inspection. Vendor shall give final confirmation to Company at least seven (7) working days prior to actual inspection or test of overseas inspection and three (3) working days for domestic inspection. When any change of inspection date occurs due to fabrication schedule, Vendor shall notify Contractor of the revised inspection date at least ten (10) working days in advance of any witness point in writing and such confirmation will be informed to COMPANY.
14
4.6 NOTICE OF INSPECTION SCHEDULE COMPANY shall notify Authorized Inspection Agency for the inspection to be witnessed by Authorized Inspection Agency. When Contractor / Vendor informs any change of inspection date after issuance of the ‘Monthly Inspection Schedule’, Contractor / Vendor will submit the above revised schedule to COMPANY immediately or within 2 days after confirmation of the new schedule. 4.7 NOTICE OF WITNESS INSPECTION FROM COMPANY Company will inform Contractor / Vendor as well as Authorized Inspection Agency decision on which items COMPANY, and / or Authorized Inspection Agency will accompany Contractor’s/Vendor’s inspector on expected materials/equipment shop test as mentioned in this procedure. If there is any change of inspection date as mentioned in this procedure, which occur due to the fabrications schedule, Contractor will inform COMPANY immediately and COMPANY will give short notice to the contractor within 3 working days. 4.8 INSPECTION AND TEST RECORD Contractor / Vendor shall submit all inspection and / or test records to the company. Company will check the inspection and test records issued by Contractor / Vendor and will submit them to Client / End User for information.
15
5. HSE Policy It is a fundamental responsibility and commitment of the Delta-Region to provide and maintain a safe and healthy working environment for our staff, contractors and also clients. We will diligently comply with all provision of the Occupational Safety and Health Act, Regulations and approved codes of practice. The objectives of our policy are to: ensure a healthy and safe working environment for all the employees clients and contractor personnel alike. develop and enforce the use of safe working practices and provide training to employees. investigate all unsafe practices, incidents and injury accidents. hold each manager accountable for the achievement of these objectives. prevent negative impact to the environment. In conducting the business activities, we will strive to prevent all occupational illness, accidents, injuries, and pollution to the environment. Every employee of Delta-Region is actively involved and complements management responsibility by making suggestions for improvements. We strongly believe the application of sound safety and health practices for the protection of our people, clients and contractors is an essential ingredient in the overall success of our business.
16
6. Information of Company Registered Company Name
:
Delta-Region Engineering Sdn Bhd
Registration Number
:
405532-A
Registered Office Address
:
Lot 2089, 1st Floor, Krokop Main Road, P.O.Box 678 98007 Miri, Sarawak.
Telephone Number
:
+608 - 5410 626 (4 lines)
Fax Number
:
+608 – 5411 679
Email Address
:
[email protected]
Managing Director
:
Liew Fah Sin
Banker
:
CIMB Bank Berhad Lot 507 &508 Block 9 Miri Concession Land District Jln Permaisuri, Miri, Sarawak.
CAPITAL
AUTHORISED CAPITAL
:
RM 500,000.00
PAID UP CAPITAL
:
RM 500,000.00
17
7. Organization Chart DELTA REGION ENGINEERING SDN. BHD. ORGANIZATION CHART
Managing Director
Secretary
Business Development Director
Admin / HR Director
Accountant
Business Development Manager
Admin Assistant
Agents / Distributors / Market Network
Sales Support Team - Technical Support Engineer - Sales Support Executive - Expeditor
18
DELTA REGION ENGINEERING
DISTRIBUTORS/AGENTS
ASSOCIATE COMPANIES
STRATEGIC ALLIANCES
PETRO SUTRA (BRUNEI)
SUTRA ENGINEERING SDN..BHD.
EJ JOINT VENTURE SDN.BHD (M)
FLO SOLUTION PTY (AUSTRALIA)
TENAGA KENARI
ALPHA GROUP; PROBITY (THAILAND)
AMALGAMATED METAL CORPORATION P&G ENERGY
PT MAKS; EJJV (INDONESIA)
EXACT AUTOMATION
LITEKON BUILTEK CORP; EJJV (PHILIPPINES)
19
8. WHCP Procedures & Documentation 1. WHCP Drawings We design and provide comprehensive WHCP drawing for clients to review prior fabrication. Bill of material complete with actual make/model number is usually included for client’s perusal. 2. Components Certificates We provide certificates of compliance, test reports, from manufacturer or recognized organization such as ASME for equipments used in the WHCP. These certificates copies are usually burnt in cd and send to client as part of Vendor Master Document List. 3. WHCP Operating Procedures We provide WHCP operating procedures to client through conducting training by our experienced trainers. 4. Components Catalogues, Operating and Maintenance Manuals Together with BOM, we include components’ catalogues/datasheet for clients to review prior procurement. 5. Factory Acceptance Test (FAT) Factory acceptance test procedures are written and given to clients for review before the actual FAT kickoff. This also includes PRE FAT tests which clearly specify reservoirs preparation and filling, system tubing drains, system leak test, etc.
20
9. Previous Job Experience 9.1 Track Record of Supplying Solar Panel, WHCP, ICS, Fusible Loop Panel & Alarm System No 1.
Client Sarawak Shell Berhad (Malaysia)
Project Description Supply of WHCP for SFJT-B
Supplied Date 20.08.2003
2.
Sarawak Shell Berhad (Malaysia)
Supply of IGLO Solar Panel for SJJT-B
25.08.2003
3.
Sarawak Shell Berhad (Malaysia)
Supply of IGLO Solar Panel for SJJT-B
25.08.2003
4.
Sarawak Shell Berhad (Malaysia)
Supply of WHCP for SFJT-B Revisit Project
30.05.2003
5.
Sarawak Shell Berhad (Malaysia)
Supply of (ICS) Instrumented Protective and Control System for SFJT-B
12.03.2003
6.
Sarawak Shell Berhad (Malaysia)
Supply of ICS and Solar Power System for SJ-Rej. Phase 2
05.12.2003
7.
Sarawak Shell Berhad (Malaysia)
Supply of ICS for BJJT-A
07.05.2003
8.
Sarawak Shell Berhad (Malaysia)
Supply of Integrated SIMOPS Safety System for SJJT-B
07.05.2004
9.
Sarawak Shell Berhad (Malaysia)
Supply of ICS & Solar Power System for 12.11.2004 SJJT-B Revisit 1
10.
Petronas Carigali (Malaysia)
Supply of SIPROD Alarm Panel for BAJT-H
12.12.2005
11.
Petronas Carigali (Malaysia)
Supply of Fusible Plug Loop Panel for BAJT-H
12.12.2005
21
9.1 Track Record of Supplying Solar Panel, WHCP, ICS, Fusible Loop Panel & Alarm System No 12.
Client Shell China, Changbei (China)
Product Description Supply of WHCP for ONSHORE Gas Plant
Date 20.01.2006
13.
Shell China, Changbei (China)
Supply of WHCP for Changbei Cluster 5,6, 14
03.05.2007
14.
Petronas Carigali Vietnam (Vietnam)
Supply of WHCP for Pearl Development Platform
22.06.2008
9.2Track Record of Supplying Safety Relief Valve No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Client Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia)
Product Description 1/2" MNPT x 1" FNPT Safety Relief Valve 1" MNPT x 1.1/2" FNPT Safety Relief Valve 3/4" 150RFF x 1" 150RFF Safety Relief Valve 1" 300RFF x 2" 150 RFF Safety Relief Valve 1" 150# x 2" 150# Pilot Operated Safety Relief Valve 1" ANSI 150 RFT x 2" ANSI 150 RFT Taylor Safety Relief Valve 1/2" x 1" 150# Safety Relief Valve
Date 23.01.2003
1 1/2" 150# x 1" 150# Safety Relief Valve 4" 150# x 6" 150# Safety Relief Valve 1/2" 150# x 1" 150# Safety Relief Valve 1 ½” 1500# x 2” 300# Pilot Relief Valve
14.12.2004
22
23.01.2003 23.01.2003 23.01.2003 23.01.2003 23.01.2003 30.06.2004
25.02.2005 18.04.2005 06.06.2005
9.2Track Record of Supplying Safety Relief Valve 12.
13.
14.
15.
16.
17.
18.
19. 20.
21.
22. 23. 24.
Client PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS PT. MULTI ANDAL KARSA SELARAS (Indonesia) PT. MULTI ANDAL KARSA SELARAS (Indonesia) OFFSHORE CPI SUPPLY (Malaysia) TECHMACH (Malaysia)
Brand Project Location 1" 300 x 2" 150# Safety Relief 14.08.2007 Valve, Taylor Model 7800 Hard Seat 1 1/2" 300# x 2" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat
14.08.2007
1" 300# x 2" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat
14.08.2007
1 1/2 300# x 3" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat
14.08.2007
2" 150# x 3" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat
14.08.2007
3" 150# x 4" 150# Safety Relief Valve
14.08.2007
1-1 1/2" 150# x 3" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat 1" 300# RFF x 2" 300# RF Pressure Relief Valve 1"300#RF x 2" 150# RF Pressure Safety Valve
14.08.2007
1" 300# x 2" 150# Pressure Safety Valve
11.12.2007
1” Safety Relief Valve, Taylor Model 8200 Series 1” 150# x 1” 150# Pressure Safety Relief Valve PETRONAS CARIGALI 11/2” x 2” and 11/2” x 2 ½” (Malaysia) Pressure Safety Valve
26.03.2008
23
14.12.2007 11.12.2007
05.06.2008 30.07.2008
9.3 Track Record of Supplying Control Valve 1． 2. 3. 4.
5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
Client Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia)
Brand Mitech
Project Location North Sabah Field
Date 08.08.2003
Mitech
North Sabah Field
19.08.2003
Valflo
North Sabah Field
01.10.2003
Mitech
P.MY.SJC.DF.02.001.T11231 14.10.2003 Proj. Store MY02
Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Petronas Carigari Sdn.Bhd. (Malaysia) Sarawak Shell Berhad (Malaysia) Petronas Carigari Sdn.Bhd. (Malaysia)
Valflo
North Sabah Field
16.12.2003
Valflo
North Sabah Field
14.10.2003
Mitech
North Sabah Field
27.02.2003
Valflo
North Sabah Field
15.03.2004
Valflo
North Sabah Field
16.03.2004
Valflo
North Sabah Field
8.06.2004
Valflo
North Sabah Field
16.06.2004
Valflo
North Sabah Field
07.07.2004
Valflo
North Sabah Field
21.07.2004
Valflo
North Sabah Field
16.08.2004
Valflo
North Sabah Field
24.08.2004
Mitech
North Sabah Field
15.09.2004
Valflo
North Sabah Field
11.01.2005
Mitech
Kemaman
2005
24
9.3 Track Record of Supplying Control Valve 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
Client Shell China (China) Seri Dynamik (Malaysia) Seri Dynamik (Malaysia) Sarawak Shell Berhad (Malaysia) MLNG (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) PMSB (Malaysia) PMSB (Malaysia) MLNG (Malaysia) Shell China (China) Ethylene Malaysia (Malaysia) Ethylene Malaysia (Malaysia)
Brand Mitech Valflo
Project Location Changbei Kemaman
Date 2005 22.01.2006
Mitech
Kemaman
31.05.2006
Mitech
Labuan
18.07.2006
Mitech Mitech
Bintulu Brooke Dockyard Kuching
17.07.2006 20.02.2006
Mitech
North Sabah Field
27.02.2006
Valflo
Labuan
27.02.2006
Mitech Mitech Mitech Mitech Mitech
Labuan Labuan Bintulu Changbei Kemaman
27.11.2006 27.12.2006 06.02.2007 30.05.2007 14.12.2007
Mitech
Kemaman
02.01.2008
25
9.4 Track Record of Supplying Choke Valve 1.
2.
3. 4. 5.
6. 7.
Client Sarawak Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia)
Product Description Electric Motor Actuator Angle Choke Valve Pneumatically Operated Control Choke C/W Auto Drain Regulator & Piston Actuator
Platform Sabah Shell KNDP-AKinabalu Duilling Platform Labuan Spply Base (MY02)
Date 19.11.2002
Sarawak Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sarawak Shell Berhad (Malaysia) Sabah Shell Berhad (Malaysia)
Choke Valve C/W Pneumatic Actuator Manual Angle Choke Valves Electric Motor Actuator Angle Choke Valve Angle Choke Valve Package Taylor R4, Angle Body Regulant Choke Valve Manual Angle Choke Valves Pneuamatic Piston Actuated Angle Choke Valve Choke Valve, Flanged
Labuan Spply Base (MY02) Labuan Spply Base (MY02) KNDP-A RD3- Kinabalu Drilling Platform
27.05.2003
E11 And F23 Rejuvenation Project MESPLI Kinabalu D.P.A.
08.12.2003
8.
Brooke Dockyard (Malaysia) 9. Sarawak Shell Berhad (Malaysia) 10. Sabah Shell Berhad (Malaysia) 11. Sarawak Shell Berhad (Malaysia) 12. Instrumentation, Valves & Fitting Sdn. Bhd. (Malaysia) 13. Shell China (China) 14. Shell China (China) 15. Shell China (China)
Flow Control Valve
26
15.09.2003 06.11.2003
02.03.2004
05.03.2004 Sarawak Shell E11 & F23
11.06.2004
North Sabah 96 PSC DF Production Facilities SJ Jacket A SSB Work Management Plant, Labuan
14.09.2004
Taylor Choke Valve, Size: 2" x 900#
RTJ Flanged End Gate Valves, 2-9/16 5000# Taylor Choke Valves c/w Actuators Angle Choke c/w Actuator
09.05.2003
22.01.2007 25.06.2007
Changbei Production Facilities Changbei Production Facilities Changbei Production Facilities
9.10.2007 24.04.2007 22.08.2007
9.4 Track Record of Supplying Choke Valve Client 16. Shell China (China)
17. Oil –Tech (Singapore) 18. Shell China (China) 19. Petronas Carigali (Malaysia)
Product Description DN 150 ANSI 1500#, Angle Type Control Choke Valve c/w Actuator Choke Valve c/w Actuator Taylor Choke Valve, Size: 3" x 2" x 3" 600# RFF Choke Valve
27
Platform Changbei Production Facilities
Date 18.09.2007
Singapore
15.01.2008
Changbei Production Facilities
20.02.2008
09.06.2008
10. Project Photographs
28
29
11. Letters of Appointment/Support
30
31
32
12. Standards and Approvals:
9 IEC 60079- Electrical Apparatus for Explosive Gas Atmospheres 9 IEC 60332- Test on electric cables under fire conditions 9 IEC 60529- Classification of Degree of protection Provide by Enclosures 9 IEEE – Institute of Electrical & Electronic Engineering 9 ISA – International Standard Automation 9 NAS 1638 – Cleanliness Requirements of Parts Used in Hydraulic Systems 9 API RP 14B –Design, Installation & Operation of Subsurface Safety Valve Systems 9 API RP 14C –Analysis, Design, Installation & Testing of Basic Surface Safety on Offshore Production Platforms 9 CSA – Canadian Standards Association 9 UL – Underwriter Laboratory 9 CENELEC – European Committee for Electro technical Standardization 9 NEMA – National Electrical Manufacturers Association
33
34
The End
35
