STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 1 of 17
REV AMD 1
STANLOW AND SHELL HAVEN Piping Classes
REV
AMD
G
G
DESCRIPTION
STANLOW AND SHELL HAVEN PIPING CLASSES, GENERATED AND FROM SGSI REFINING AND CHEMICALS PIPING CLASSES (R&C) AND MODIFIED TO REFLECT STANLOW AND SHELL HAVEN PREFERRED PRACTICE
AMD1
Liners removed from all S.S. classes. Amended conversion list for S1303.0, G011372, G011373, G063250 Archived Piping class reference included for; S1218.0, S1402.0, 1501.0,1803.0, S1810.0, 1812.0, S3218.0, S6137.0. GRE class GO17012 Added. Service Index updated. Gasket MESC No’s amended in G031172, G031260 & G031271
DATE
APPROVED BY
SIGN.
Dec 2002
Sept 2003
CUSTODIAN
:
PRJ/42/01 John Kokott
WRITTEN BY
:
PRJ/42/01
CHECKED
:
PRJ/40/00
APPROVED BY
:
PRJ/00/01 OME/00/06 CME/00/01
DISTRIBUTION
:
‘Engineering Technical Specifications’ Folder - SITE ‘S’ DRIVE & ETS web
G
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 2 of 17
REV
G
AMD 1
ETS 601 REVISION HISTORY
DATE
REV. AMD NO.
Document Revision Log Original issue
MGE/00/01
Revision of pages 1 to 10
MGE/00/01
Dec 90
O
Aug 91
A
Nov 91
B
Revision of pages 1,2,9,10,11,12,13,14,15 & 16
May 92
C
Revision of pages 1 to 19
Dec 92
C AMD1
Revision of pages 2,13 & 14
July 93
D
Revision of pages 2,12 to 26
July 94
E
June 95
F
SIGN.
MGE/00/01 MGE/00/01
MGE/00/01 MGE/00/01
Revision of pages 1 to 14
MGE/00/01
Revision of pages 1 to 20
MGE/00/01
May 96
F AMD1
Lower temp. limit increased from –20 Deg C In ASTM A106-B Carbon Steel Classes
MGE/00/01
Mar 99
F AMD2
Low Stress spiral wound gaskets replaced by Tanged insert gaskets in 150# Classes.
MGE/00/01
STANLOW AND SHELL HAVEN Piping Classes generated and rationalised from SGSI Refining and Chemicals Piping Classes (R & C Piping Classes)
PRJ/00/01 OME/00/06 CME/00/01
Liners removed from all S.S. classes. Amended conversion list for S1303.0, G011372, G011373, G063250 Archived Piping class reference included for; S1218.0, S1402.0, 1501.0,1803.0, S1810.0, 1812.0, S3218.0, S6137.0. GRE class GO17012 Added. Service Index updated. Gasket MESC No’s amended in G031172, G031260 & G031271
PRJ/00/01 OME/00/06 CME/00/01
Dec 02
Sept 03
G
G AMD1
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES 1.
Page 3 of 17
REV
G
AMD 1
Introduction This Engineering Technical Specification covers the requirements of the Piping Classes to be used at Stanlow Manufacturing Complex and Outlying Sites.
2.
Scope This Engineering Technical Specification contains Stanlow Piping Classes, specifying recommended piping materials to be used for process piping at Stanlow Refinery (all within the property limits as defined in ANSI B.31.3 para 300.1) It takes precedence to Piping classes – Refining and Chemicals DEP 31.38.01.12. (See Work Instruction PRJ. D.2.10. This sets down guidelines for selection and control of Piping classes at Stanlow.) It does not replace Special Piping Classes which have been compiled as part of Stanlow upgrading projects, or PU specific Piping Classes with special material requirements. The basis of design of the piping classes is given in DEP 31.38.01.10-Gen. DEP 31.38.01.11- Gen specifies the general requirements for piping systems and includes some design –related requirement for specific services, e.g. hydrogen fluoride, sulphuric acid, sodium hydroxide, chlorine. See Section 6 for Index of Stanlow PU Specific Piping Classes. See Section 7 for Piping Class Conversion Table (Rev F to Rev G)
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
3.
Page 4 of 17
REV
G
AMD 1
Service Index
WHERE THE SERVICE IS NOT SPECIFICALLY DEFINED BELOW, AND FOR FINAL SELECTION OF MATERIALS, A MATERIALS ENGINEER SHALL BE CONSULTED
* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE
MEDIUM
PROPERTIES
Acetic acid Acetone Acetonitrile ADIP Air Air
all concentrations
RECOMMENDED
TEMP LIMITS DEG C
PIPING CLASSES
0 0 0
-
100 100 130
3031 1021 1021
instrument
0 0
-
200 190
1021 1021
Air
tool
0
-
100
1021
Air
tool
0
-
100
8011
Air
instrument
0
-
190
8011
Allyl chloride Amine (MEA.DEA.AD) Ammonia Ammonia Ammonia Aviation alkylate Benzene Benzene Butane Butane Butane Butanol Butanol Butylene Butylene Caustic soda Calcium carbonate Calcium chloride Calcium hydroxide Carbon dioxide Carbon dioxide
wet
0
-
20
7012
-
165 100 120 120 85 45 340 40 50 200 40 140 100
Carbon monoxide Chlorine Chlorine Chlorine Chlorine Condensate Coolant Diethanol amine Diethanol amine Diethanol amine
REMARKS
*
SEE NOTE IN
2.1 1 1 1 consult materials engineer
aqueous gas , dry and wet Anhydrous
gas liquid
gas
0 0 -50 0 45 0 0 0 -50 0 0 0 -50
from compressor to filter reg. Station 80ns and above from compressor to filter reg. Station 80ns and above hot dipped galv’d hot dipped galv’d
1 1, 18 1, 18
downstream of filter reg.station up to and including 50ns
1, 18
downstream of filter reg.station up to and including 50ns
1, 18 10
consult materials engineer 1021 1021 1173 1021 1011 1172 1011 1021 1172 1021 8081 1011 1172
4 1021
1
4 1 7012
to prevent product contamination 4 see Sodium hydroxide
aqueous aqueous aqueous dry wet
0 0 0 0 0
-
50 50 50 350 100
1021 1021 1021 1011 3011
3021 3031 7010
1, 10 consult materials engineer
gas, dry gas, wet gas, wet liquid, dry steam non - aerated 60/40% H2O/methanol dry water
-35 0 0 -35 0 -50 0 0 0
-
70 80 200 70 250 50 150 150 100
1271 7210 8160 1271 1261 1172 1021 3021 3031
2 4, 5 10 4, 5 4 1
to prevent product contamination
1
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 5 of 17
REV
G
AMD 1
Service Index (cont) WHERE THE SERVICE IS NOT SPECIFICALLY DEFINED BELOW, AND FOR FINAL SELECTION OF MATERIALS, A MATERIALS ENGINEER SHALL BE CONSULTED
* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE
MEDIUM Diethylene glycol Diethylene glycol Dimethylketone Diphenyl propane Ethane Ethane Ethane Ethanol Ethylbenzene
Ethylene Ethylene Ethylene Ethylene oxide Ethylene oxide Ethylene oxide Foam, fire fighting Formic acids Fuel gas Fuel gas Fuel oil Gasoil Gasoline Heat transfer fluid Hydrocarbons
RECOMMENDED
PROPERTIES all concentrations, dry water
C02, water Concentrate, solution all concentrations wet H2S wet H2S Sulphur compounds
Dowtherm Non-corrosive
TEMP LIMITS DEG C
*
PIPING CLASSES
0 0 0 0 0 -50 -90 0 0
-
150 150 100 140 100 150 150 100 450
1021 3031 1021 3031 1011 1172 3091 1021 2040
0 -50 -140 0 0 0 0 0
-
340 150 150 50 150 200 50 30
0 0 0 0 0
-
330 200 100 390 200
1011 1172 3091 1300 3100 3100 3031 3031 1120 1120 1011 1011 1021 1011 1011
Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons
Non-corrosive Non-corrosive With wet H2S With or without wet H2S With wet H2S With S and / or Nap. Acid
0 0 0 -50 0 0
-
330 425 200 150 200 240
1011 2080 1011 1172 1015 1011
Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons Hydrocarbons Hydrochloric acid Hydrochloric acid Hydrochloric acid Hydrochloric acid Hydrogen Hydrogen Hydrogen Hydrogen chloride
With S and / or Nap. Acid With S and/or NA With Hydrogen and H2S Naphtenic acid Sulphur compounds LPG propane, butane effluent, CO2, H2
240 240 230
-
330 450 538
1042 2040 3055
Hydrogen chloride Hydrogen fluoride Hydrogen peroxide Hydrogen sulphide Ional
gas, wet
conc. < 37% all concentrations all concentrations with or without wet H2S no h2s with h2s gas, dry
up to 98% gas, dry
REMARKS
SEE NOTE IN
2.1 1
3021
to prevent product contamination
3021
final product DPP plant
1 1 4 4 1
11011 5Cr.0.5Mo material only needed for >330 C, otherwise carbon steel is OK e.g. Class 11011, 11021
4 4 1
7102 7201
321/347 material replaces 316L 321/347 material replaces 316L 15NS - 80NS severity category VERY LOW severity category MODERATE-LOW
1021
1012 1176 1125 1012 1031
non sour Low temp., non sour high sour
corrosion rate must be checked corrosion rate must be checked
10 10 3 3
1, 9 , 12 9, 12 9 9 4, 9 9 2, 9, 13 9, 13, 14
consult materials/corrosion engineer consult materials/corrosion engineer -50
-
150
1172
4
0 0 0
-
200 80 60
8 10
0 230 230 0
-
230 450 538 100
6071 7200 8120 8160 1071 2110 3055 1011
0 0
-
50 200
7010 1310
0 0
-
200 100
1041 3031
1076 2120
Moderate sour Check API 941 for pres./temp. limit
1012 1021
3, 8 5 1
6080 consult materials engineer. consult materials engineer to prevent product contamination
10 8,15 8 2
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 6 of 17
REV
G
AMD 1
Service Index (cont) WHERE THE SERVICE IS NOT SPECIFICALLY DEFINED BELOW, AND FOR FINAL SELECTION OF MATERIALS, A MATERIALS ENGINEER SHALL BE CONSULTED
* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE
MEDIUM
RECOMMENDED
PROPERTIES
TEMP LIMITS DEG C
* REFINING &
Isobuytl alcohol
finished product
0
-
100
1011
Isobuytl alcohol Isopentane Isopropyl alcohol LPG LPG propane, butane LPG propane, butane LPG propane, butane Luboil Luboil Luboil Methane Methane Methane Methanol
finished product
0 0 0
-
100 100 100
0 0 -50 0
-
340 100 150 200
0 0 -50 -200 0
-
150 100 150 150 100
8081 1021 1021 1173 1011 1021 1172 1021 3021 3031 1021 1172 3091 1011
-50 0
-
150 100
1172 1011
0 0 0 0
-
30 100 340 95
1021 3031 1011 1021
0
-
200
3031
0 0 -200
-
340 200 150
1011 1021 3091
0 0
-
400 200
1011 1011
0
-
150
3021
0 0
-
50 150
3031 1011
0 0
-
200 80
3021 none
0 0 0 0
-
60 70 70 70
3031 none none 4020
0 -50 -48 -100
-
340 150 150 150
0
-
200
1011 1172 1172 3091 3021 1011
HC’s, H2S, H2O gas liquid liquid/gas
Methanol Methyl ethyl ketone Methyl mercaptan Mono ethanol amine Naphtha Naphthenic acid Naphthenic acid Nitogen Nitogen Nitogen Oxygen Pentane Phenol
finished prduct finished/unfinished product finished/unfinished product
liquid
Phenol Phosphoric acid Polyols Polyols Polyols Polypropylene Polypropylene Polypropylene Polypropylene Potassium hydroxide Propane Propane Propylene Propylene Seal Oil Secondary butyl alcohol
all concentrations unfinished neutral product acidic or alkaline finished neutral product granulated slurry lines slurry lines powder gas
liquid
REMARKS
CHEMICALS PIPING CLASSES
SEE NOTE IN
2.1
1012 1021
1
consult materials engineer
4
4
4 4 1012 1021
1 4 1
1012 1021
4 6,8 1012 1021 3031 3011
1 to prevent product contamination
1 8
1012, 1021 3031 ETS 601 S1402.0 3130 3140
full bore ball valves full bore ball valves LP polyolefine plant consult materials engineer
8, 15 4 4 4
1012 1021
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 7 of 17
REV
G
AMD 1
Service Index (cont) WHERE THE SERVICE IS NOT SPECIFICALLY DEFINED BELOW, AND FOR FINAL SELECTION OF MATERIALS, A MATERIALS ENGINEER SHALL BE CONSULTED
* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE
RECOMMENDED SEE
MEDIUM
PROPERTIES
Sodium hydroxide
Area A-not traced -App.3
Sodium hydroxide
TEMP LIMITS DEG C
*REFINING &
0
-
80
1373
Area A- traced/ Area B-App.3
80
-
110
1372
Sodium hydroxide
Area C-App.3
0
-
150
6021
Sodium hypochloride Steam Steam Steam
Concentration < 18% saturated/superheated superheated superheated
0 0 400 400
-
50 400 450 538
7230 1261 2020 2010
0
-
200
1261
NOTE IN
2.1 for piping req. see appendix 10 of DEP 31.38.01.11.GEN for piping req. see appendix 10 of DEP 31.38.01.11.GEN for piping req. see appendix 10 of DEP 31.38.01.11.GEN
16
16
16
10 2080 2080 2021 2050
Steam condensate Sulfinol Sulphur
dry
0
-
150
Sulphur trioxide Sulphuric acid
dry gas >65% wt
0 0
-
340 60
1011 1012 1021 1011 1091
Sulphuric acid
over 65% wt
0
-
150
8160
Toluene Triethanol amine Vacuum service
0-20 mbar abs.
0 0 0
-
340 40 150
1011 1021 none
11150
Vacuum service
0-20 mbar abs.
0
-
150
none
13110
Water, boiler feed Water, boiler feed
treated non - corrosive demineralized aerated
0 0
-
250 150
1261 3031
Water, boiler feed Water, boiler feed Water, cooling Water, cooling
fresh fresh
0 0 0 0
-
90 75 60 50
7011 8040 1201 7320
Water, cooling
brackish
Water, cooling Water, cooling Water, demineralized
brackish brackish
Water, demineralized Water, potable/domestic Water, potable/domestic
REMARKS
CHEMICALS PIPING CLASSES
consult materials engineer
8011 -5
-
60
0
-
80
7320 1011 3021
0 0
-
80 40
7012 7012
0
-
40
7015
for piping req. see appendix 10 of DEP 31.38.01.11.GEN temp. can be limited by valve selection
17
17
CS vacuum class with modified flanges for ‘O’ rings SS vacuum class with modified flanges for ‘O’ rings
3021 3011
1 10
GRE hot dipped galv’d GRE
10 supply and return ,50NS and smaller underground above and underground
18 18 ,10 18
3031 3011 For above ground systems only For underground systems only
10 10 10
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 8 of 17
REV
G
AMD 1
Service Index (cont) WHERE THE SERVICE IS NOT SPECIFICALLY DEFINED BELOW, AND FOR FINAL SELECTION OF MATERIALS, A MATERIALS ENGINEER SHALL BE CONSULTED
* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE
MEDIUM
RECOMMENDED
PROPERTIES
TEMP LIMITS DEG C
*REFINING &
Water, fire fighting
fresh
0
-
50
1201
Water, fire fighting
fresh spray systems
0
-
200
8081
hot dipped galv’d
spray systems
0
-
200
1101
or 1021
brackish
0
-
60
1201
Water, fire fighting
REMARKS
CHEMICALS PIPING CLASSES
spray systems
0
-
200
8081
spray systems
0
-
60
1201
Water, process
Demineralised
0
-
150
3031
Water, process Xylene
demineralized
0 0
-
80 340
18040 1011
hot Hot dipped galv’d
SEE NOTE IN
2.1 above and underground
18
up to & including 50ns
18
80ns and above to be hot dipped galvanised, before final installation. (downstream of filter outlet valve)
18
above and underground
18
up to & including 50ns
18
80ns and above to be hot dipped galvanised, before final installation. (downstream of filter outlet valve)
18
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 9 of 17
REV
G
AMD 1
Notes for Service Index 1.
Ball valve class preferred by most chemical plants and/or for services requiring frequent valve operations.
2.
Selection between 1 and 3 mm corrosion allowance depending on the corrosivety of the medium has to be selected by the corrosion engineer.
3.
For the definition of "High sour" and "Moderate sour", see DEP 31.38.01.11-Gen., Appendix 10. For new construction and/or modifications to existing piping, this Appendix should be used to determine the severity of the wet H2S process environment and the piping class/materials selected accordingly, taking into account economics and material availability.
4.
See DEP 30.10.02.31-Gen. for low temperature service.
5.
See DEP 31.38.01.11-Gen., Appendix 10 for piping in dry chlorine service.
6.
See also DEP 31.10.11.31-Gen for gaseous oxygen systems.
7.
Amine includes ADIP, MEA, DEA, AD, TEA and sulfinol: H2S case = H2S/CO2 > 0.01 for gas phase, > 0.02 for liquid phase; CO2 case = H2S/CO2 < 0.01 for gas phase, > 0.02 for liquid phase.
8.
Selection shall be carried out by materials engineer on the basis of the specific process conditions.
9.
Hydrocarbon service includes aviation alkylate, LPG, C1-C4, paraffins and olefins, fuel gas, fuel oil, gasoil, gasoline, isopentane, luboil, naphtha, pentane, toluene and xylene.
10.
See DEP 31.40.10.19-Gen. for the use of GRP piping.
11.
See DEP 80.47.10.31-Gen. for fire-fighting installations.
12.
H2 partial pressure < 7 bar; wet H2S < 50 mg/kg; wet HCN < 20 mg/kg; S < 0.3 wt. %;TAN < 0.3; H2S < 0.01 mol.%
13.
S = Sulphur, Nap. Acid = Naphthenic Acids.
14.
Consult a materials engineer for a check on the high temperature sulphidation corrosion rate and select materials accordingly.
15.
See DEP 31.38.01.11-Gen., Appendix 10 for piping in hydrofluoric acid service.
16.
See DEP 31.38.01.11-Gen., Appendix 10 for piping in sodium hydroxide (caustic soda) service The same requirements are applicable to potassium hydroxide service.
17.
See DEP 31.38.01.11-Gen., Appendix 10 for piping in sulphuric acid service.
18.
Stanlow recommended practice.
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES 4.
Page 10 of 17
REV
Summary of Revisions to ETS 601 STANLOW AND SHELL HAVEN Piping Classes (since rev F AMD 2)
a) Gaskets 150# as per R&C class (low Stress Spiral wound gaskets replaced By Tanged Insert gaskets in 150# Class) Gaskets 300# to 1500# to be Stanlow specific Spiral Wound. b) Small bore gate globe valves – socket weld option removed. c) In carbon steel classes ASTM A350-LF2 branch nipples are Now of ASTM A105 material (except low temp class) Material reflects that of piping class, not all low temp d)
Meter Runs as per SGSI R&C classes see S.G.S.I. STD Drg S38.132
e) Pipe Schedule as per SGSI R&C classes (Reduced schedules in some larger sizes) f) Branch Nipples Outlet Profile modified to industry standard. g) Valves rationalised as per SGSI R&C classes. h) Flanged Thermowells as per SGSI R&C classes see S.G.S.I. STD Drg S38.113
5.
G
AMD 1
S.G.S.I. Standard Drawings. S38 113 Flanged Thermowell DN40 ASME Classes up to 1500 incl S38 130 Orifice Flanges, Raised Face, With Flanged Tappings ANS Class 300 to 2500 Incl, Nom Size Dn to 600 Incl S38 134 Orifice Meter Runs with Flange Ends nom size 15 to 40 incl ANS Class 150 To Class 1500 Incl S38.132 Orifice Meter Runs with Flange Tapping Ans class 300 to 2500 incl Nom size Dn 50 to 300 incl
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES 6.
Page 11 of 17
REV AMD 1
P.U. Specific Piping classes See Stanlow Web:- Stanlow Engineering Services ETS’S
CRACKING – OMC Senior Plant Engineer ref indicator OMC/20/09 PLANT CCU 2.
Drg No 592766 (For CCU 2 Piping Classes)
GSU 2 On plot
Drg No 632160 (For GSU2 On plot Piping Classes)
HFA On plot
Drg No 642125 (For HFA On plot Piping Classes)
EBU ON PLOT
Drg 661352
(For EBU On plot Piping Classes)
SECONDARY PROCESSING – OMP Senior Plant Engineer ref, indicator OMP/44/07 Drg No 717748 (For all Secondary Processing Piping Classes) PLANT HVI PLATFORMER 2 PLATFORMER 3 AROMATICS HDS 2 SOLVENTS AND RESINS –CAS Senior Plant Engineer ref indicator CRS/30/35 Drg No 717191 (For all Solvents and Resins Piping Classes) PLANT SOLVENTS RESINS U7800
G
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 12 of 17
REV
ALCOHOLS AND ADDITIVES – CAS Senior Plant Engineer ref indicators CMS/20/11 & CMS/21/11 Drg No 725501 (For all Alcohols and Additives Piping Classes) PLANT ALCOHOLS ADDITIVES DISTILLITION and UTILITIES ODU Senior Plant Engineer ref indicator ODU/30/08 Drg No 723920 (For all Distillation Piping Classes) Drg No 720150
(For all Utilities Piping Classes)
PLANT DISTILLATION UTILITIES ADIP REGEN SOUR WATER STRIPPER WASTE MANAGEMENT
SHOP CMO Senior Plant Engineer ref, indicator CMO/30/19 PLANT Drg No 716992 (For SHOP Piping Classes) SHOP ADAP RM17 N.W.E.P SLCS – UOCL (Lubricants) Senior Plant Engineer ref indicators UOCL/34 Drg No 725539 (For SLCS – UOCL Lubricants Piping Classes) SHELL HAVEN Engineering Support SVN-BIT/2
AMD 1
G
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES 7.
REV F Class number
Page 13 of 17
REV
G
AMD 1
Conversion Table
Material description
Conversion / New
REV G Class number
Notes
S1101.0
Carbon steel A106-B
Now use Piping class
G011011
S1102.0
Carbon steel A106-B
Now use Piping class
G011021
S1102.2
Carbon steel PWHT
Now use Piping class
G011023
S1103.0
Carbon steel A106-B
Now use Piping class
G011031
Carbon steel A106-B
NEW Piping class
G011041
Carbon steel A106-B
NEW Piping class
G011042
S1105.0
Carbon steel A106-B
Now use Piping class
G011031
S1106.0
Carbon steel A106-B
Now use Piping class
G011060
Carbon steel A106-B
NEW Piping class
G011071
S1108.0
Carbon steel A106-B
Now use Piping class
G011021
S1109.0
Carbon steel A106-B
Now use Piping class
G011091
S1112.0
Carbon steel A106-B
Now use Piping class
G011120
Stanlow 100% Radiography
Stanlow (high vac) Restricted to maintenance of existing facilities
Stanlow 100% rad
S1115.0
Carbon steel A106-B
Now use Piping class
G011150
S1117.0
Carbon steel A333 LT F-Gr
Now use Piping class
G011172
S1117.1
Carbon steel A333 LT F-Gr PWHT
Now use Piping class
G011173
S1120.0
Carbon steel A106-B
Now use Piping class
G011201
S1126.0
Carbon steel A106-B
Now use Piping class
GO11261
S1130.0
Carbon steel A106-B
Now use Piping class
G011300
S1137.0
Carbon steel A106-B
Now use Piping class
G011373
AMD1
S1137.1
Carbon steel A106-B PWHT
Now use Piping class
G011372
AMD1
S1204.0
Alloy steel (5Cr-0.5Mo)
Now use Piping class
G012040
S1208.0
Alloy steel (0.5Mo)
Now use Piping class
G012080
S1218.0
Not issued
Contact PRJ/42/01 (AMD 1)
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 14 of 17
REV
S1301.0
Stainl steel AISI 321/347
Now use Piping class
G013011
S1302.0
Stainl steel AISI 316
Now use Piping class
G013021
S1303.0
Stainl steel AISI 316
Now use Piping class
G013031
S1309.0
Stainl steel AISI 304 LT
Now use Piping class
G013091
S1311.0
Stainl steel AISI 316
Now use Piping class
G013110
S1313.0
Stainl steel AISI 316
Now use Piping class
G013130
S1314.0
Stainl steel AISI 321/347
Not issued
Contact PRJ/42/01
S1402.0
Alloy
Not issued
Contact PRJ/42/01 (AMD1)
1501.0
Aluminium brass
Not issued
Contact PRJ/42/01 (AMD1)
S1602.0
MONEL 400
Now use Piping class
G016021
1607.0
Hastalloy B2
Now use Piping class
G016071
GRE-Aromatic amine
NEW class
G017011
GRVE-Bisphenol A
NEW class
G017012
GRE-Allphatic amine+alum foil
NEW class
G017015
S1702.0
PVC
Now use Piping class
G017020
1705.0
GRE-Aromatic amine
Now use Piping class
G017011
1706.0
GRE-Aromatic amine
Now use Piping class
G017011
GRE-Aromatic amine
NEW class
G017021
1709.0
GRE-Aromatic amine Sour
Now use Piping class
G017031
1710.0
GRVE-Bisphenol A
Now use Piping class
G017102
1711.0
GRE
Not issued
1712.0
GRE-Allphatic amine
Now use Piping class
G017121
GRE-Novolac epoxy
NEW class
G017201
API 5L –B GALV
Now use Piping class
G018011
S1801.0 1803.0 1804.0 S1808.0
API 5L –B Cement lined API 5L –B Rubber lined API 5L –B GALV
AMD 1 (liner removed)
Stanlow (high vac) Restricted to maintenance of existing facilities Stanlow Restricted to maintenance of existing facilities
AMD1
Stanlow
Contact PRJ/42/01 (AMD1)
Not issued
Contact PRJ/42/01 (AMD1)
Now use Piping class
G018040
Now use Piping class
G018081
G
AMD 1
Stanlow
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES
Page 15 of 17
REV AMD 1
S1810.0
API 5L –B GALV
Not issued
Contact PRJ/42/01 (AMD1)
1812.0
API 5L –B Glass lined
Not issued
Contact PRJ/42/01 (AMD1)
S1816.0
Carbon steel PTFElined
Now use Piping class
G018160
S3101.0
Carbon steel A106-B
Now use Piping class
G031011
S3102.0
Carbon steel A106-B
Now use Piping class
G031021
S3102.2
Carbon steel A106-B PWHT
Now use Piping class
G031023
S3103.0
Carbon steel A106-B
Now use Piping class
G031031
S3104.0
Carbon steel A106-B
Now use Piping class
G031041
Carbon steel A106-B
NEW class
G031042
S3105.0
Carbon steel A106-B
Now use Piping class
G031031
S3106.0
Carbon steel A106-B
Now use Piping class
G031060
S3107.0
Carbon steel A106-B
Now use Piping class
G031071
S3108.0
Carbon steel A106-B
Now use Piping class
G031021
S3109.0
Carbon steel A106-B
Now use Piping class
G031091
S3112.0
Carbon steel A106-B
Now use Piping class
G031120
S3113.0
Carbon steel A106-B
Now use Piping class
G031131
S3117.0
Carbon steel A333 LT F-Gr
Now use Piping class
G031172
S3117.1
Carbon steel A333 LT F-Gr PWHT
Now use Piping class
G031173
S3126.0
Carbon steel A106-B
Now use Piping class
G031261
S3127.0
Carbon steel A333 LT F-Gr
Now use Piping class
G031271
S3130.0
Carbon steel A106B
Now use Piping class
G031300
S3137.0
Carbon steel A106B
Now use Piping class
G031373
S3137.1
Carbon steel A106B PWHT
Now use Piping class
G031372
S3201.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G032010
S3202.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G032020
S3203.0
Alloy steel (5Cr-0.5Mo)
Now use Piping class
G032040
S3204.0
Alloy steel (5Cr-0.5Mo)
Now use Piping class
G032040
S3208.0
Alloy steel (0.5Mo)
Now use Piping class
G032080
Stanlow 100% Radiography
Stanlow 100% Radiography
AMD 1 (gasket MESC)
AMD 1 (gasket MESC) AMD 1 (gasket MESC)
G
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES S3211.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
S3218.0
3.5 Ni.
Not issued
S3301.0
Stainl steel AISI 321/347
Now use Piping class
G033011
S3302.0
Stainl steel AISI 316
Now use Piping class
G033021
S3303.1
Stainl steel AISI 316
Now use Piping class
G033031
S3305.0
Stainl steel AISI 321/347
Now use Piping class
G033050
S3309.0
Stainl steel AISI 304 LT
Now use Piping class
G033091
S3313.0
Stainl steel AISI 316
Now use Piping class
G033130
S3314.0
Stainl steel AISI 321/347
Now use Piping class
G033140
S6101.0
Carbon steel A106-B
Now use Piping class
G061011
Carbon steel A106-B Carbon steel A106-B Carbon steel A106-B
NEW class NEW class NEW class
REV
G
AMD 1
G032110 Contact PRJ/42/01 (AMD1)
Stanlow Restricted to maintenance of existing facilities Stanlow Restricted to maintenance of existing facilities
G061031 G061041 G061042
S6105.0
Carbon steel A106-B
Now use Piping class
G061031
S6106.0
Carbon steel A106-B
Now use Piping class
G061060
S6107.0
Carbon steel A106-B
Now use Piping class
G061071
S6117.0
Carbon steel A333 LTF Gr
Now use Piping class
G061172
Carbon steel A333 LTF Gr PWHT
New class
G061173
S6126.0
Carbon steel A106B
Now use Piping class
G061261
S6137.0
Carbon steel A106B
Not issued
S6137.1
Carbon steel A106B PWHT
Now use Piping class
G061371
S6201.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G062010
Alloy steel (1.25Cr0.5Mo)
New class
G062011
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G062020
Alloy steel (1.25Cr0.5Mo)
New class
G062021
S6203.0
Alloy steel (5Cr-0.5Mo)
Now use Piping class
G062040
S6204.0
Alloy steel (5Cr-0.5Mo)
Now use Piping class
G062040
S6211.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G062110
S6202.0
Page 16 of 17
Stanlow 100% Radiography
Contact PRJ/42/01
STANLOW SHELL HAVEN
ENGINEERING TECHNICAL SPECIFICATION
DOC: No.
ETS 601
Title :
STANLOW and SHELL HAVEN PIPING CLASSES S6301.0
Stainl steel AISI 321/347
Now use Piping class
G063011
S6302.0
Stainl steel AISI 316
Now use Piping class
G063021
S6305.0
Stainl steel AISI 321/347
Now use Piping class
G063050
S63090
Stainl steel AISI 304 LT
Now use Piping class
G063090
S6325.0
Stainl steel AISI 304 H
Now use Piping class
G063250
S9101.0
Carbon steel A106B
Now use Piping class
G091011
S9103.0
Carbon steel A106B
Now use Piping class
G091031
S9105.0
Carbon steel A106B
Now use Piping class
G091031
S9106.0
Carbon steel A106B
Now use Piping class
G091060
S9107.0
Carbon steel A106B
Now use Piping class
G091071
S9117.0
Carbon steel LT F-Gr
Now use Piping class
G091172
S9126.0
Carbon steel A106B
Now use Piping class
G091261
S92010
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G092010
S9202.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G092020
S9211.0
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G092110
S9302.1
Stainl steel AISI 316
Now use Piping class
G093021
S9305.0
Stainl steel AISI 321/347
Now use Piping class
G093050
S15101.0
Carbon steel A106-B
Now use Piping class
G151011
S15105.0
Carbon steel A106-B
Now use Piping class
G151031
S15106.0
Carbon steel A106-B
Now use Piping class
G151060
S151070
Carbon steel A106-B
Now use Piping class
G151071
S151260
Carbon steel A106-B
Now use Piping class
G151261
S152020
Alloy steel (1.25Cr0.5Mo)
Now use Piping class
G152020
Now use Piping class
G153050
S153050
Stainl steel AISI 321/347
Page 17 of 17
REV AMD 1
Stanlow -AMD1
Stanlow 100% Radiography
Stanlow 100% Radiography
G