Which of the following is not a default stock shape in FeatureCAM? *
A _____ in FeatureCAM helps convert programmed features into usable NC Code for a specic machine. *
Shapes and proles are often used to dene features in FeatureCAM. If a prole consists of more than one piece of geometry, it rst must be chained into a _____ before making a _____ out of if. * https://docs.google.com/forms/d/e/1FAIpQLSdiF4z_pewzMT6rEM7dOVGsMx5-YfhJ6fPkzScbjUM22n6SgQ/viewscore?viewscore=AE0zAgBSiAWnXt…
3/11
2/2/2018
FeatureCAM Fundamentals - Turning
Which of the following features can be created from curves? (Check all that apply) *
Which of the following features can be created from dimensions? *
_____ simulations are the safest simulation type, checking your part program for gouges, tool collisions, and collisions with non-cutting components such as the spindle, or turret. *
When importing a model, which of the following does the import wizard not help you do? *
A slug transfer is an example of what kind of Feature? *
Setting the 'Undercut' setting on a turning feature's 'Turning' tab to _____ would ensure that no toolpath is generated in the highlighted portion of the model. *
A second setup must be created to transfer your part to the subspindle. *
It is possible to generate toolpath past the ends of a turn feature's curve by setting a face side or spindle side boundary past each end of the curve. *