Install Vulcan

After trying, a lot this procedure if me I work, I have the 7 64 bit Professional

 Windows: First part. 1 install the vulcan 2 install the safety controllers 3 copy the multikey to a folder in the vulcan 4 deactivate the UAC and restart 5 go to devcom, install, sing driver do straight click choose properties Then compatibility and put on win xp sp2 and run as administrator. 6 run the reg 7 run the devcom 8 run elinstall and hope it to recognize key 9 glue the multikey to c:windowssistem32driver. Second part 1 run the hasphl2010_x64. 2 emulate the 44A30126_full_2.dng 3 go to administrator from licence and look for the Kinross_Brasil_nodelock_0905 Kinross_Brasil_nodelock_0905 08.lic 4 before starting pull the instal.reg to the short cut that I consider one of th e vulcan. 5 start and I list. The steps q I did he is: 1 Install Vulcan 2 Instal HASP HL 3 Install Sentinel 4 Install V801 SP1 5 Install V802 SP2 6 Install ANTIHASPHL2008 I install the Driver then Dongles (Star Service) Emulat or (Laud dump - 44A30126_full_2 ) 7 I Run Vulcan Licence File I load the Kinross_Brasil_nodelock_090508 file but h e does not load the licence A. PREPARING FLOAT LICENCE(s) 1. Create an empty flexlm and VULCAN_TEMP directory on C:\ 2. Run a command prompt (cmd.exe) and execute C:\>ipconfig /all ; press enter. 3. At the cmd screen, Under Windows IP Configuration, read the Host Name. Example : ----------------------------------------------------------Windows IP Configuration Host Name . . . . . . . . . . . . : lavteam-0016725 ----------------------------------------------------------In this example, Host Name = lavteam-0016725 4. Copy and Paste a licence from Post #961 : http://forum.lavteam.net/index.php? http://forum.lavteam.net/index.php? showtop...mp;p=210045into showtop...mp;p=210045i nto any Text Editor. Make sure that the FIRST and the END line of licence like below : First line : SERVER Your-server-name ANY 20071 VENDOR MAPTEK c:\flexlm\maptek.exe Endless line : ISSUED=06-apr-2009

5. In the first line of license, replace `Your-server-name' with Host Name. Example : Before Replacement : SERVER Your-server-name ANY 20071 VENDOR MAPTEK c:\flexlm\maptek.exe After Replacement : SERVER lavteam-0016725 ANY 20071 VENDOR MAPTEK c:\flexlm\maptek.exe See the example _license below : » Click to show Spoiler - click again to hide... « SERVER lavteam-0016725 ANY 27001 VENDOR MAPTEK c:\flexlm\maptek.exe FEATURE VULCANMERING3 MAPTEK 1.000 05-jan-2052 999 468A3744CECC \ ............................................................... ISSUED=06-apr-2009 6. Save the file as smngs_vulcan750.lic ( for example ) to directory: С:\FLEXlm 7. Copy and Paste the following text into any Text Editor : -------------------------------------------------------------------------------Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment ] "LM_LICENSE_FILE"="27001@host" -------------------------------------------------------------------------------8. Replace host with the Host Name. Example : Before Replacement : "LM_LICENSE_FILE"="27001@host" After Replacement : "LM_LICENSE_FILE"="27001@lavteam-0016725" 9. Save the file as 27001_lavteam-0016725.reg 10. Double Click 27001_lavteam-0016725.reg, when a dialog confirmation displayed , click Yes. 11.Restart Computer B. 1. 2. 3. 4. e, 5.

INSTALL _VULCAN_and FLEXlm server Execute autorun.exe of Vu1can 7.5 installer package. Click Install VULCAN & drivers Click Install Vu1can, follow the vu1can setup wizard to finish it. Click Install network license (FLEXlm), when FLEXlm setup wizard ask a licenc browse to C:\flexlm\smngs_vulcan750.lic Click Next to finish the FLEXlm setup wizard.

C. STARTING THE _FLEXlm SERVER 1. Go to C:\flexlm directory and double click lmtoos.exe. A LMTOOLS window will be displayed. 2. Click Config Services Tab. Make sure the configuration like below : ----------------------------------------------------------Configure Service Service Name : FLEXlm maptek Path to the lmgrd.exe file : C:\flexlm\lmgrd.exe Path to the license file : C:\flexlm\smngs_vulcan750.lic Path to the debug log file : C:\flexlm\debug.log

[x] Start Server at Power up [x] Use Services ----------------------------------------------------------3. Click Save Service button. When a dialog confirmation displayed, Click Yes. 4. Click Start/Stop/Reread Tab. Sequently, Do three steps below : First : Click Stop Server Second : Click Start Server Third : Click ReRead License File After step C.4 finish, at the bottom of Start/Stop/Reread Tab, make sure there i s a message Reread Server License File Completed . 5. Close LMTOOLS window D. STARTING _VULCAN FOR THE FIRST TIME 1. Run Vu1can from Start-->Programs or Double Click Vu1can icon on Desktop. 2. The first time run Vu1can, Several error messages usually appear. Simply Clic k Yes until a Licence Administrator Window displayed. 3. In the Licence Administrator Window, Click Browse and browse to C:\flexlm\smn gs_vulcan750.lic. 4. Under Licence Type, Click one of float licence which you want. 5. Click OK. A Vulcan Launcher window will be displayed. 6. Under Vu1can Work Area, Click browse and browse to your Vu1can Work Area dire ctory. Example : D:\LAVTEAM_MEMBER E:\LAVTEAM_PROJECT F:\Phd_Thesis e.t.c 7. Finish and Enjoy.

smile.gif

Attention : 1. The use of lavteam-0016725  as a Host Name is only for example. Different Co mputer has different Host Name. 2. When the licence had been edit, Step C and D should be repeated. 3. Normaly wink.gif , the licence only support for Vu1can release date before 3 1 Dec 2007 ( Maximum version = Vu1can 7.5 without any Service Pack installed ) 4. All licence which is displayed in this topic of this forum are FREE FOR