Modular Offers Catalog 2014

Catalog 2014

Energy training solutions Modular offers

™

The modular offers The modular offers are designed for studying and setting up products used in the residential, small services and industrial sectors. The purpose of a modular offer is to enable users to create their own configurations using energy training modules mounted on a supporting structure. These energy training modules are designed to be linked and powered via a uniform connector in complete safety. The operational parts of the modular offer can be used to connect a control part to a system in order to simulate a simple real-life process; these control parts are also designed to connect to certain operational parts of the 2013-2014 energy training solutions catalog, by means of either converter sockets or D-sub connectors. The auxiliary parts of the modular offer are designed to ensure that a configuration works correctly. The Modular Offers are made up of a variety of specific automation and energy management components, depending on the offer type. There are seven offers: • • • • •

The KNX modular offer for setting up components for the buildings and small services sectors. The Residential and Small Services modular offer for setting up the components of an electrical installation for the home and small service industries. The Solar modular offer for learning about the production of energy by solar panels. The iRIO Telemetry offer for optimising energy consumption. The Industry modular offer (control systems, motor starters & machine safety ) for setting up automation solutions.

Each modular offer can be tailor-made by buying the modules separately separately..

Examples of modules

Strengths :

Rail structure to hold the various modules

2

Modular offer catalog 2014

• Scalable solution • Space-saving and easy to store store • Quick to install • Allows various configurations configurations with no wiring restrictions • Safety and connection ensures a long service life for connectors

Structure of the Catalog To help you in your choice, this catalog is divided into various sections :

Building management modules Solutions for implementing an electrical installation in complete safety in the small services and buildings sector.

Global energy management modules Systems for working with renewable energies and for energy management

Process and machine management modules •

Industrial and communication control systems:

Solutions for finding out about programming and communication between systems.

•

Automated systems:

Solutions for implementing automated systems or production lines.

•

Industrial control and machine safety:

Solutions for studying the basic components of automated systems and machine safety.

•

Variable speed drive and motion control:

Variable speed drive systems for synchronous, asynchronous and brushless motors.

Accessories and additional modules

Your new catalogs : Fuller, more segmented, the new document structure Energy training solutions 2014, comes in three catalogs : • Energy training solutions 2013 - 2014 • Energy training solutions - Modular offers • Energy training solutions - BIP BOP program


Technicaleducation

Educational solutions Catalogue 2013 - 2014

Educationalsolutions 2013

Catalog 2014

Energy training solutions

pourrépondreauxbesoinsdelaformationprof essionnelle tomeettheneedsofvocationaltraining pararesponderalasnecesidadesdelaformaciónprof esional

Modular offers

™

Energy training solutions 2013 - 2014

Energy training solutions Modular offers

™

Energy training solutions BIP BOP program

3

Index by reference Reference

Designation

Page

Reference

Designation

MD1AM0 001

ZELIO PLC module

73

MD1AM3 010

Artec 8-key multifunction pushbutton module

13

MD1AM0 002

TWIDO PLC module

73

MD1AM3 011

Artec 4-key multifunction pushbutton module

14

MD1AM0 003

M340 PLC module

74

MD1AM3 012

Trancent pushbutton module

14

MD1AM0 004

PREMIUM PLC module

74

MD1AM3 013

Movement sensor module

15

MD1AM0 005

16 discrete input PLC interface module

75

MD1AM3 014

Presence sensor module

15

MD1AM0 006

16 discre te out pu t PLC inte rface module

75

MD1AM3 015

2 binary input module

16

MD1AM0 007

4 analogue input/output PLC interface module

76

MD1AM3 017

4-button pushbutton module with thermostat

16

MD1AM0 008

XBTR411 panel control module

76

MD1AM3 018

Presence and light sensor module

17

77

MD1AM3 019

M-PLAN IR 8-key multifunction pushbutton module

17

77

MD1AM3 020

KNX/DALI gateway module

18

78

MD1AM3 021

EMO servo motor module

18

78

MD1AM3 022

Weather station module with associated sensor

19

79

MD1AM3 023

24 VAC/VDC power supply module

19

79

MD1AM3 025

KNX bus 160 power supply module

20

80

MD1AM3 026

8-button multifunction pushbutton module + IR

20

81

MD1AM3 027

4-button multifunction pushbutton module

21

81

MD1AM3 028


21

91

MD1AM3 029

4-button pushbutton module + time delay

22

91

MD1AM3 030

PLC module

22

92

MD1AM3 031

KNX/IP router module

23

92

MD1AM3 032

24 VDC power supply module

23

93

MD1AM3 033

HVAC actuator module

24

93

MD1AM3 034

Servo motor module

24

94

MD1AM3 035

8 LED module

25

94

MD1AM3 037

Room temperature thermostat module

25

95

MD1AM3 038

0 - 10 V actuator module

26

95

MD1AM3 039

Intesys Box gateway module

26

96

MD1AM3 040

10-inch screen module

27

96

MD1AM3 041

Blind actuator module

27

97

MD1AM3 042

0 - 10 V actuator module – three-way control

28

97

MD1AM 3BA

KNX discovery batch

32

98

MD1AM 3EE

KNX energy efficiency discovery batch

33

98

MD1AM4 001

24 VDC - 2.5 A power supply module

31

99

MD1AM4 002

24 VDC - 4.2 A power supply module

31

99

MD1AM5 001

Altivar 312 module

100

61

MD1AM5 002

Altivar 12 module

100

61

MD1AM6 001

Circuit breaker panel module + tariff meter

35

1P + N 10 A circuit breaker module

35

MD1AM0 009 MD1AM0 010 MD1AM0 011 MD1AM0 012 MD1AM0 013 MD1AM0 014 MD1AM0 015 MD1AM0 016 MD1AM0 018 MD1AM1 001 MD1AM1 002 MD1AM1 003 MD1AM1 004 MD1AM1 005 MD1AM1 006 MD1AM1 007 MD1AM1 008 MD1AM1 009 MD1AM1 010 MD1AM1 011 MD1AM1 012 MD1AM1 013 MD1AM1 014 MD1AM1 015 MD1AM1 016 MD1AM1 017 MD1AM1 018 MD1AM2 001 MD1AM2 002

XBTGT4340 panel control module Ethernet hub module (see Alvidis hub) Modbus field distributor module XBTGTW450 panel control module PREMIUM PLC module with counter

High-speed counter module USB interface simulator module HMISTU855 terminal module ZELIO COM PLC module TeSys U module 1.6 A magnetic protection module Thermal-magnetic protection module 4 A magnetic protection module Vario switch module Fused (off-load) isolator module 1/1.6 A thermal relay module 9 A - 24 VDC contactor module Reversing contactor module 240 V Altistart soft starter module Contactor relay module Time-delay contactor relay module 25 A - 230 VAC contactor module 9/13 A thermal relay module Thermal-magnetic protection module ZIGBEE - ZBRRA module ZIGBEE - ZBRRC module 380/415 V Altistart soft starter module 230 VAC single-phase protection module Three-phase protection module

Page

Dead product

MD1AM2 003

Power meter module - METSEPM3250

62

MD1AM6 002

MD1AM2 004

3 CT module

62

MD1AM6 003


36

MD1AM2 005

EGX300 gateway module

63

MD1AM6 004

1P + N 16 A residual current circuit breaker module

36

MD1AM2 006

iRIO controller module

63

MD1AM6 005


37

MD1AM2 007

Modbus Slave interface module (SIM10M)

64

MD1AM6 006

Impulse relay module with integrated function

37

MD1AM2 008

Zigbee Modbus interface module (SIM10Z)

64

MD1AM6 007

Impulse relay module with control

38

MD1AM2 009

EGX105Z gateway module

65

MD1AM6 008

Programmable timer switch module

38

MD1AM2 010

Wi-Fi router module

65

MD1AM6 009

2 NO 25 A contactor module

39

MD1AM3 001


09

MD1AM6 010

MIN'clic 1 to 7 min timer module

39

MD1AM3 002

System coupler module

09

MD1AM6 011

Advance off warning module

40

MD1AM3 003

KNX 4-output module

10

MD1AM6 012

IC200 light-sensitive switch module

40

MD1AM3 004

KNX 230 V 4-input module

10

MD1AM6 013

CDS single-phase load shedder module, 1 channel

41

MD1AM3 005

Variable control actuator module

11

MD1AM6 014

To-and-fro switch module

41

MD1AM3 006

Programmable timer module

11

MD1AM6 015

Pushbutton module

42

MD1AM3 007

USB interface module

12

MD1AM6 016

Illuminated pushbutton module

42

MD1AM3 008

Roller shutter actuator module

12

MD1AM6 017

Double pushbutton module

43

MD1AM3 009

Artec double pushbutton module

13

MD1AM6 018

2P + T 10/16 A socket module

43

4


Reference

Designation

Page

Reference

Designation

MD1AM6 019

Page


44

MD1AMS 001

Ammeter/voltmeter module

55

MD1AM6 020

Time r modu le wi th advance off warn ing

44

MD1AMS 002

Shunt controller module

55

MD1AM6 029

Room temperature sensor module

45

MD1AMS 003

12 VDC battery module

56

MD1AM6 030

TH4 3-threshold thermostat module

45

MD1AMS 004

230 VAC - 30 W inverter module

56

MD1AM6 121

Domestic discovery batch T1/T2

49

MD1AMS 005

Solar panel module

57

MD1AM6 122

Domestic discovery batch T3/T4

49

MD1AM6 123

Small services discovery batch

50

MD1AM6 126

Residential and small services discovery batch

50

MD1AM6 130

Residential and small services EE discovery batch

51

MD1AM7 001

Variable speed drive control module

103

MD1AM7 002

Machine control module

103

MD1AM7 003

ZIGBEE control station module

119

MD1AM7 004

Motor starter control module

119

MD1AM9 001

Safetymodule for emergency stop monitoring

109

MD1AM9 002

Safety module for emerg. stop + limit switch monitoring

109

MD1AM9 003

Safetymodule for magnetic switch monitoring

110

MD1AM9 004

Safety module for time delay monitoring

110

MD1AM9 005

Safety module for zero speed monitoring

111

MD1AM9 006


111

MD1AML DM

Starter motor discovery batch

MD1AML ZL

Zelio PLC discovery batch

89

MD1AML TW

Twido PLC discovery batch

88

MD1AML MR

M340 PLC discovery batch

87

MD1AML PR

Premium PLC discovery batch

88

MD1AML RFID

RFID discovery batch

87

105

MD1AML ATV12 Altivar 12 drive discovery batch

107

MD1AML ATV312 Altivar 312 drive discovery batch

107

MD1AML ATVEE

106

Ventilation energy efficiency discovery batch

MD1AML IRIO

iRIO discovery batch MD1AML SECU Machine safety discovery batch MD1AML SOL Solar discovery batch

69 115

MD1AMP 001

230/400 V asynchronous motor operational part

101

MD1AMP 002

Motorised conveyor operational part

101

MD1AMP 003

Traffic management operational part

82

MD1AMP 004

15 W lamp bracket operational part

28

MD1AMP 005

Automatic barrier operational part

82

MD1AMP 006

Temperature control operational part

83

MD1AMP 007

Electric shutter operational part

47

MD1AMP 008

Process control operational part

84

MD1AMP 009

50 W lamp bracket operational part

58

MD1AMP 010

2 kW room heater operational part

29

MD1AMP 011

Machi ne safe ty bench operat iona l par t

112

MD1AMP 013

400/690 V asynchronous motor operational part

102

MD1AMP 014

230/400 V motorised fan operational part

102

MD1AMP 016

RFID operational part

85

MD1AMP 017

Water meter operational part

66

MD1AMP 018

PT100 temperature operational part

66

MD1AMP 019

Analogue sensor operational part

84

MD1AMP 021

DALI operational part

118

MD1AMP 022

La mp + dimmer swi tch operation al par t

1 18

MD1AMP 024

2 m motorised conveyor operational part

MD1AA CORDONS

Safety leads batch

MD1AA VOLETR

Roller shutter operational part

30

MD1AA STORE

Venetian blind operational part

30

59

85 120


5

Building management

modules

Building management modules KNX modular offer .....................................................................................................8 Control part modules ............................................................................................................................................................9 Operational part modules .................................................................................................................................................28 Auxiliary part modules ........................................................................................................................................................31 Discovery batches ...............................................................................................................................................................32

Residential and Small Services modular offer ................................................. 34 Control part modules ..........................................................................................................................................................35 Operational part modules ..................................... ............................................ .............................................. ................. 46 Auxiliary part module ............................................................... ........................................... ........................................... ... 48 Discovery batches ....................................... ........................................... ............................................ ................................ 49

Products comply with the provisions of European Directives Compliance report available on request All of our discovery batches are supplied with:

• Printed copy of the technical data sheet and specification • A CD containing PDF versions of these documents and the PLC applications Safety leads are sold separately, see Additional modules and accessories section


7

KNX modular offer Educational objectives: • To analyse the functionalities and the principles of a home automation installation • To wire the components • To configure the system according to various scenarios

Electrical and mechanical data • Power supply: 230 V ~ single phase +T/200 VA • Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg

Main sectors

Package presentation The KNX modular offer allows you to explore the very latest in intelligent building solutions: • •

Internationally recognised standard and certified system Flexible and cost-effective

The proposed products allow functions such as the following to be achieved: • Control of roller shutters • Control and variation of lighting • Control and variation of temperature

The KNX modular offer comprises: Designation KNX bus 160 power supply module System coupler module KNX 4-output module

• Electrical engineering • Industrial engineering and maintenance

KNX 230 V 4-input module

Other sectors

Programmable timer module USB interface module

• Industrial science and technology



Artec double pushbutton module ARTEC 8-key multifunction pushbutton module with infrared ARTEC 4-key multifunction pushbutton module TRANCENT pushbutton module Movement sensor module Presence sensor module All these elements are interlinked by the Konnex bus which meets the international ISO/IEC 14 543-3 standard. Functions are configured from a PC using ETS 4 Pro or Trainee software.

2 binary input module 4-button pushbutton module with thermostat function Presence and light sensor module M-PLAN 8-key multifunction pushbutton module with infrared KNX/DALI gateway module Servo motor module Weather station module with associated sensor 24 VAC/VDC power supply module KNX bus 160 power supply module 8-button pushbutton module with infrared 4-button pushbutton module KNX bus 320 power supply module 4-button pushbutton module + time delay Logic module KNX/IP router module 24 VDC power supply module HVAC actuator module Servo motor module 8 LED module

Actuator module MD1AM3 003

Switch module MD1AM3 017

Room temperature thermostat module 0 - 10 V actuator module Intesys Box gateway module 10-inch screen module Blind actuator module 0 - 10 V actuator module

8


KNX MODULES • KNX BUS 160 POWER SUPPLY MODULE

MD1AM3 001

KNX BUS 160 POWER SUPPLY MODULE

The module is connected to the 230 V supply downstream of an appropriate electrical protection device (230 VAC/10 A single-phase protection module, reference MD1AM2 001). It supplies the power for operating the KNX bus.

Technical data • Power supply: KNX bus

•

Technical data:

o o

Maximum number of devices on bus: 32 Protection: Short-circuit proof

•

3 x 4-mm safety sockets labelled L, N and Earth available for power distribution to other modules.

• Contents: Module comprises: • MTN683329 - 1-line 32P BUS power supply

One pair of jumpers (red and blue)

• SYSTEM COUPLER MODULE

MD1AM3 002

SYSTEM COUPLER MODULE

The system coupler module is used for the logical linking and galvanic separation of lines and domains. A changeover switch allows you to switch between "coupler" mode and "amplifier" mode. In coupler mode the component is wired in parallel on the bus and creates a new line (or zone).

Technical data • Power supply: KNX bus In amplifier mode, the bus enters the component for reformatting before exiting again.

• Contents: Module comprises: • MTN680204 - System coupler/repeater



9

• KNX 4-OUTPUT MODULE

MD1AM3 003 Technical data • Power supply: KNX bus

KNX 4-OUTPUT MODULE

The KNX 4-output module can be used for independent switching with the four outputs via NO or NC contact. All the outputs can be actuated manually using selector switches on the product's front panel. A green LED indicates the module's operating status. • o o o o o

Examples of software functions: Time delay for each channel Timer Alert Interlock Sequences

Rated voltage: 230 VAC Rated current: 16 A (cos = 0.6) Rated power: 230 VAC incandescent lamps: 3600 W 230 VAC halogen lamps: 2500 W 230 VAC fluorescent lamps: 2500 W

o o o

Information feedback per channel Central function Parameter settings for loss/restoration of bus connection

• Contents: Module comprises: • MTN647593 - KNX 4-output module


• KNX 230 V 4-INPUT MODULE


KNX 230 V 4-INPUT MODULE

The 4-input module can be used to connect conventional devices with 230 VAC outputs. The four inputs have a yellow LED status indicator. A green LED indicates the module's operating status. • o o o o o o

Examples of software functions: Switch with short and long press and bounce-free contact Dimmer or shutter control Edges triggering data packets (1 to 8 bits) Sequences Interlock NO/NC contact

Input voltage: 230 VAC Touch current: 12 mA Low set-point: i 40 V High set-point: 160 V Module comprises: • MTN644990 - 230 VAC 4 binary input module

• Contents: One pair of jumpers (red and blue)

10


• VARIABLE CONTROL ACTUATOR

MD1AM3 005

VARIABLE CONTROL ACTUATOR MODULE

The variable control actuator module can be used to switch and vary the current of an output. The output can be actuated manually using the pushbutton on the product's front panel. A green LED indicates the module's operating status. Two LEDs (yellow and red) indicate the channel status and a fault on the channel respectively.

Technical data • o o o o o o

• Power supply: KNX bus

Rated voltage: 230 VAC Rated power: 500 W/VA Minimum rated power: Resistive loads: > 30 W Capacitive loads: > 50 VA

Examples of software functions: Switch ON response Memory function Range of dimming speeds and curves Switch OFF via relative dimming Minimum light level Parameter settings for loss/restoration of bus connection


Module comprises: • MTN649350 - Variable control actuator

• PROGRAMMABLE TIMER MODULE

MD1AM3 006

PROGRAMMABLE TIMER MODULE

The programmable timer module comprises a programmable annual quartz clock with four channels. The clock can either be programmed manually on the device or on a PC using Obelisk software (option). • o

Technical data

o o o o


o o

Technical data: 324 continuous switching schedules for operations on a daily or weekly basis or on a specified date, pulse control. 1 operation for public holidays 10 weekly programs per channel for public holidays Optional training of channel blocks + days of the week Manual operation possible via operation preset and continuous switching Random program Control without network connection o o • o o o • o o


Large program memory backup Automatic daylight saving time management Examples of software functions: Switch Variable control Date and time transmission Technical data: Operational accuracy: < + 1 s/day Program memory backup: 1.5 years

Module comprises: • MTN677129 - 4-channel programmable clock


11

• USB INTERFACE MODULE

MD1AM3 007 Technical data

USB INTERFACE MODULE

The module comprises a USB/KNX interface for programming or diagnostics. A computer running ETS4 software is connected to the USB module by means of the USB cable supplied. •

Technical data:

o

Compatibility: USB 1.1 or USB 2

• Power supply: KNX bus Module comprises: • MTN681829 - USB interface module

• Contents: One USB 1.1/2.0 cable One pair of jumpers (red and blue)

• SHUTTER ACTUATOR MODULE

MD1AM3 008

ROLLER SHUTTER ACTUATOR MODULE

The roller shutter actuator module can be used for independent switching of two drives for roller blinds or shut ters. Manual operation is selected by means of a "Hand" pushbutton and a red LED indicator. In this mode all outputs can be actuated manually by means of pushbuttons. Yellow LEDs indicate the status of each channel. A green LED indicates the module's operating status.

Technical data • Power supply: KNX bus • o o o o o o

Input voltage: 230 VAC Touch current: 10 A (cos = 0.6) Motor load: 230 VAC, max. 1000F

Examples of software functions: Choice of blind type Operating time/dwell time Interlock Weather alarm Sequences Information feedback


12

Module comprises: • MTN649802 - 230 VAC roller shutter actuator


• ARTEC DOUBLE PUSHBUTTON MODULE

MD1AM3 009

ARTEC DOUBLE PUSHBUTTON MODULE

The module comprises a double pushbutton (4 keys with appropriate printing for control of roller shutters). The micro-switch and programming LED can be accessed by unclipping the product.

Technical data

• o o o o o o


• Contents:

Module comprises: • MTN626299 - ARTEC double pushbutton control • MTN626760 - ARTEC aluminium double control • MTN481160 - ARTEC aluminium finishing plate


• MULTIFUNCTION PUSHBUTTON


Examples of software functions: Keys can be configured as pairs (up to start, down to stop) or as individual keys. ON switching OFF switching Variable control Sequences Blind control (paired configuration)

ARTEC MULTIFUNCTION PUSHBUTTON MODULE 8 KEYS AND IR RECEIVER

The module comprises a quadruple pushbutton (8 keys) and an infrared receiver for remote control (reference MTN 570222). The lower central part of the front panel can be configured as an additional command key. User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key Blue operating and status indicator light for each key. The micro-switch and programming LED can be accessed by unclipping the product. • o


o o o o o o o o

• Contents:

Examples of software functions: Switch with short and long press and bounce-free contact Selector switch Variable control (paired or single) Blind control (paired or single) Edges triggering data packets (1 to 8 bits) Edges with 2-byte data packets 8-bit sliding controller Sequence storage and recall Interlock Module comprises: • MTN628460 - Artec 8-key multifunction pushbutton • MTN481160 - Artec finishing plate - white



13


ARTEC 4-KEY MULTIFUNCTION PUSHBUTTON MODULE

The lower central part of the front panel can be configured as an additional command key. User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key Blue operating and status indicator light for each key. The micro-switch and programming LED can be accessed by unclipping the product.


• o

• Contents:

o o o o o o o

Module comprises: • MTN628160 - ARTEC 4-key multifunction pushbutton • MTN481160 - ARTEC finishing plate - white


• TRANCENT PUSHBUTTON MODULE

S

TRANCENT PUSHBUTTON MODULE

MD1AM3 012

The module comprises a touch-sensitive pushbutton fitted with a glass finishing plate. The control electronics can be programmed as a single, double or quadruple touch control (1 to 4 touch-sensitive zones). An LED indicator helps to locate the pushbutton in the dark. An audible signal is emitted when a touch control is activated.

Technical data

User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key


• Contents:

The micro-switch and programming LED can be accessed by unclipping the product. • Examples of software functions: o Switch with short and long press and bounce-free contact o Selector switch o Variable control (paired or single) o Blind control (paired or single) o Edges triggering data packets o Edges with 2-byte data packets o 8-bit sliding controller o Interlock Module comprises: • MTN6164600 - Trancent single command • MTN569100 - Trancent glass finishing plate • MTN482160 - Trancent single-station aluminium frame


14

Examples of software functions: Switch with short and long press and bounce-free contact Selector switch Variable control (paired or single) Blind control (paired or single) Edges triggering data packets (1 to 8 bits) Edges with 2-byte data packets 8-bit sliding controller Interlock


• MOVEMENT SENSOR MODULE


ARGUS MOVEMENT SENSOR MODULE (corridor)

The module comprises an interior movement sensor with light sensor. When a movement is detected, a data telegram defined at t he programming stage is sent. The micro-switch and programming LED can be accessed by unclipping the product. • o o • o o o o

Settings via potentiometers on the back of the sensor: Operation timer period from 1 s to 8 min Light threshold (light-sensitive switch) Examples of software functions: Time delay Operation timer (stairwell) Up to 4 functions triggered on detection Information feedback • o o o

• Contents:

Module comprises: • MTN632660 - Aluminium movement sensor • MTN486160 - M-PLAN aluminium finishing plate


• PRESENCE SENSOR MODULE


Technical data: Detection angle: 180° Sensing distance: 8 m Light sensor: Continuously adjustable from 5 to 1000 lux approx.

ARGUS PRESENCE SENSOR MODULE WITH INFRARED RECEIVER (ceiling)

The module comprises an interior movement sensor with infrared receiver for remote control (ref. MTN570222). An integrated light sensor allows the light level to be controlled according to whether there is someone present. When a movement is detected, a data telegram defined at the programming stage is sent. The micro-switch and programming LED can be accessed by unclipping the product. • o o


o • o o o

Examples of software functions: Light threshold adjustment Up to 3 functions triggered on detection Information feedback Technical data: Detection angle: 360° Sensing distance: 10 to 17 m Light sensor: Continuously adjustable from 10 to 1000 lux approx.

• Contents: Module comprises: • MTN630919 - Exterior presence sensor + IR



15

• 2 BINARY INPUT MODULE

MD1AM3 015

2 BINARY INPUT MODULE

The module comprises an interface which generates an internal signal voltage for the connection of conventional pushbuttons or potential-free contacts. Two switches are wired for local simulation. The two inputs have a yellow LED status indicator.

Technical data

• o


o o

Touch voltage: < 3 V (SELV) for each input/output Touch current: < 0.5 mA Output current: 2 mA max.

o o o o

Examples of software functions: Switch with short and long press and bounce-free contact Dimmer or shutter control Edges triggering data packets (1 to 8 bits) Sequences Counter Interlock NO/NC contact


Module comprises: • MTN670802 - 2 binary input module

• 4-BUTTON PUSHBUTTON MODULE


4-BUTTON PUSHBUTTON MODULE WITH THERMOSTAT

The module comprises 4 command keys with a display screen and thermostat, an operation indicator which also acts as a night light, and a piezo buzzer as an alarm signal. The thermostat can be used for heating or air-conditioning by means of KNX continuously adjustable servo motors or for the on-off control of switching or heating actuators. Controller type: 2-point control, continuous PI adjustment, switched PI adjustment (PWM). The white display screen can show the time, date, temperature and operating mode, for example. User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key The micro-switch and programming LED can be accessed by unclipping the product. • o o o o o o o o o


Examples of software functions: Switch with short and long press and bounce-free contact Selector switch Variable control (paired or single) Blind control (paired or single) Time delay Alarm 8-bit sliding controller Interlock Cyclical reading of outside temperature

Module comprises: • MTN486160 - M-PLAN aluminium finishing plate • MTN6212-0460 - M-Plan multifunction pushbutton

16


• PRESENCE SENSOR MODULE


• Contents:

PRESENCE AND LIGHT SENSOR MODULE

The module comprises an interior movement sensor with infrared receiver for remote control (ref. MTN570222). When a movement is detected, a data telegram defined at the programming stage is sent. When the device is operating in light sensor mode (for lighting control), it continuously checks the light level in the room and stops the artificial lighting actuatorwhenthenaturallightisadequate,evenifthereissomeoneint heroom. A light sensor allows the light level to be controlled according to whether there is someone in the room. The micro-switch and programming LED can be accessed by unclipping the product. • Examples of software functions: o Light threshold adjustment o Up to 3 functions triggered on detection o Information feedback • Technical data: o Detection angle: 360° o Sensing distance: 10 to 17 m o Light sensor: continuously adjustable o From 10 to 1000 lux approx.


Module comprises: • MTN630592 - Presence and light sensor



M-PLAN 8-KEY MULTIFUNCTION PUSHBUTTON MODULE WITH INFRARED RECEIVER

The module comprises a quadruple pushbutton (8 keys) and an infrared receiver for remote control (MTN570222). The lower central part of the front panel can be configured as an additional command key. The keys can be configured as pairs (one key to start and another to stop) or singly (start and stop on one key). Blue operating and status indicator light for each key. The micro-switch and programming LED can be accessed by unclipping the product. • o o o o o o o o o



Examples of software functions: Switch with short and long press Selector switch Variable control (paired or single) Blind control (paired or single) Edges triggering data packets Edges with 2-byte data packets 8-bit sliding controller Sequence storage and recall Interlock

Module comprises: • MTN627944 - M-PLAN multifunction pushbutton with IR


17

• KNX/DALI GATEWAY MODULE


KNX/DALI GATEWAY MODULE

The module comprises the DALI gateway for connecting digital stabilisers fitted with a DALI interface to KNX. This gateway acts as the DALI master and supplies voltage to the stabilisers. It can be used to switch and vary up to 64 stabilisers in 16 groups and to control 16 lighting sequences. Light values and error messages from the DALI devices can be viewed on display units. DALI can be commissioned and configured by means of the integrated display and command keys. Two discrete inputs are available for the direct connection of pushbuttons.


Supply voltage: 110- 240 VAC Inputs: 2 passive inputs 9 - 36 VDC or 9 - 24 VAC Outputs: DALI D+/D- (16 - 18 VDC 150 mA) Module comprises: • MTN680129 - DALI gateway


• EMO SERVO MOTOR MODULE

MD1AM3 021

EMO SERVO MOTOR MODULE

The module comprises a proportional electric servo motor with integrated bus coupler, microprocessor control with automatic valve stroke detection, and two integrated binary inputs ("open window" sensor).

• o o o o o • o o o


• Contents:

Module comprises: • MTN639118 - Servo motor • MTN639190 - Programming magnet • MTN639178 - VA78 valve adapter


18

Examples of software functions: Reference position Effective position Status message Override Threshold value Travel 1.0 mm min. 4.5 mm max. Operating time 25 s/mm


• WEATHER STATION MODULE


Rated voltage: 230 VAC Analogue inputs: 4 (0-20 mA, 4-20 mA, 0 - 1 V, 0 - 10 V)

WEATHER STATION MODULE WITH ASSOCIATED SENSOR

The module comprises a weather station which detects and processes analogue signals from the sensor, including wind speed, light, twilight, precipitation and a DCF77 signal. The configuration software offers default thresholds, which can be accessed with the combined weather sensor/DCF77. The measured values are converted into 1 or 2-byte data packets, which can be viewed by means of display devices and used in command or control processes. • o o o o o o o

Examples of software functions: Two threshold values per sensor Connection of multiple anemometers 14 analysable signals Analysis of DCF77 time signal Astronomical function Signal monitoring Alarm byte • o o o o o o o

• Contents:


Optional sensors: Combined weather sensor Heated anemometer Rain sensor Heat sensor Light sensor Twilight sensor DCF77 antenna

Module comprises: • MTN682991 - Weather station • MTN663591 - Anemometer with 0-10 V interface

• 24 VAC/VDC POWER SUPPLY MODULE

MD1AM3 023

24 VAC/VDC POWER SUPPLY MODULE

The module is connected to the 230 V supply downstream of an appropriate electrical protection device (230 VAC/10 A single-phase protection module, reference MD1AM2 001). It supplies the power for operating the weather station reference MD1AM3 022.


Rated voltage: 230 VAC Module comprises: • ABL7RM24025 - Modular power supply



19

• KNX BUS POWER SUPPLY MODULE

MD1AM3 025

KNX BUS 160 POWER SUPPLY MODULE

The module is connected to the 230 V supply downstream of an appropriate electrical protection device (230 VAC/10 A single-phase protection module, reference MD1AM2 001). It supplies the power for operating the KNX bus.

Technical data • Power supply: KNX bus • o o •

Line voltage: 230 VAC Output voltage: 29 VDC +/- 1 V Output current: 160 mA max.

Technical data: Maximum number of devices on bus: 32 Protection: Short-circuit proof 3 x 4-mm safety sockets labelled L, N and Earth available for power distribution to other modules.

• Contents:


Module comprises: • MTN684016 - KNX bus 160 mA power supply

• 8-BUTTON PUSHBUTTON MODULE + IR


ARTEC 8-KEY MULTIFUNCTION PUSHBUTTON MODULE WITH INFRARED RECEIVER

The lower central part of the front panel can be configured as an additional command key. User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key Blue operating and status indicator light for each key. The micro-switch and programming LED can be accessed by unclipping the product. • o


o o o o o o o

• Contents:

Module comprises:


20

Examples of software functions: Switch with short and long press and bounce-free contact Selector switch Variable control (paired or single) Blind control (paired or single) Edges triggering data packets (1 to 8 bits) Edges with 2-byte data packets 8-bit sliding controller Interlock

• MTN627660 - Multifunction control with IR receiver • MTN486160 - ARTEC steel finishing plate




• Contents:

M-PLAN 4-BUTTON MUL MULTIFUNCTION TIFUNCTION PUSHBUTTON MODULE

The lower central part of the front panel can be configured as an additional command key. User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key Blue operating and status indicator light for each key. The micro-switch and programming LED can be accessed by unclipping the product. • Examples of software functions: o Switch with short and long press and bounce-free contact o Selector switch o Variable Varia ble control (paired or single) o Blind control (paired or single) o Edges triggering data packets (1 to 8 bits) o Edges with 2-byte data packets o 8-bit sliding controller o Interlock Module comprises: • MTN627660 - 4 M-Plan multifunction multifunction pushbuttons • MTN486160 - ARTEC aluminium aluminium finishing plate


• KNX BUS 320 POWER SUPPLY MODULE

MD1AM3 028

KNX BUS 320 POWER SUPPL SUPPLY Y MODULE

The module is connected to the 230 V supply downstream of an appropriate electrical protection device (230 VAC/10A single-phase protection module, reference MD1AM2 001). It supplies the power for operating the KNX bus.


• o o •

Line voltage: 230 VAC Output voltage: 29 VDC +/- 1 V Output current: 320 mA max.

Technic echnical al data: Maximum number of devices on bus: 64 Protection: Short-circuit proof 3 x 4-mm safety sockets labelled L, N and Earth available for power distribution to other modules.

• Contents:


Module comprises: • MTN684032 - KNX power power supply


21



4-BUTTON PUSHBUTTON MODULE + TIME DELAY

The module comprises 4 command keys with a display screen and thermostat, an operation indicator which also acts as a night light, and a piezo buzzer as an alarm signal. The thermostat can be used for heating or air-conditioning by means of KNX continuously adjustable servo motors or for the on-off control of switching or heating actuators. Controller type: 2-point control, continuous PI adjustment, switched PI adjustment (PWM). The white display screen can show the time, date, temperature and operating mode, for example. User-definable keys: o Paired: One key to start, another to stop o Single: Start and stop on a single key The micro-switch and programming LED can be accessed by unclipping the product. • o o o o o o o o o


Examples of software functions: Switch with short and long press and bounce-free contact Selector switch Variable Variabl e control (paired or single) Blind control (paired or single) Time delay Alarm 8-bit sliding controller Interlock Cyclical reading of outside temperature

Module comprises: • MTN6212-4146 - Multifunction control • MTN481146 - ARTEC single finishing plate

•

PLC MODULE


PLC MODULE

The PLC module is used for performing logical operations and advanced control functions on KNX objects. It comprises 10 logic modules, 10 filters/timers, 8 converters, 12 multiplexers, 3 programmable pushbuttons and 3 status feedback LEDs on the front panel. Control functions can be assigned to the pushbuttons and LEDs for test purposes or for operation. KNX functions: • 10 logic modules (AND, OR, EXCLUSIVE OR) • 10 filters/timers • 8 converters

• Power supply: KNX bus •

• •

12 multiplex multiplexers: ers: used for the selective transmission of telegrams. Useful for a lighting control for a room that can be divided into two by means of a partition Programming LEDs and pushbuttons on front panel Response after bus voltage return


22

Module comprises: • MTN676090 - KNX Basic PLC PLC module


• KNX/IP ROUTER MODULE


KNX/IP ROUTER MODULE

The module can be used to connect a programming or diagnostic device to KNX via an Ethernet network. There is an RJ45 connector available on the component. The IP address can be assigned dynamically via a DHCP server or by manual configuration (ETS parameters). Additional function: system coupler.


Input voltage: 20 to 30 VDC (For 24 V 40 mA DC), 12 to 24 VAC Module comprises: • MTN680329 - IP/KNX IP/KNX router


• 24 VDC POWER SUPPLY MODULE

MD1AM3 032

24 VDC POWER SUPPL SUPPLY Y MODULE

The module includes a 0.4 A, 24 VDC power supply for the IP router (reference: MD1AM3 031). Short-circuit and overload protection.


Line voltage: 230 VAC Output voltage: 24 VDC +/- 3% Output current: 0.4 A

Module comprises: • MTN693003 - REG power supply, supply, 24 V

• Contents:



23

• HVAC ACTUATOR MODULE


HVAC ACTUATOR MODULE

The module comprises an actuator for controlling heating, ventilation and air-conditioning. The actuator can be used to control threespeed fan coil units and three-point motor drives (continuous/pulse width modulation) or two-point thermal drives. The actuator supports 2-tube and 4-tube systems. Two binary inputs, for the window contact and fill level contact, for example, for the condensate recovery tank. • Controller type: PI control (PWM and continuous) • Controller mode: heating and/or air conditioning with shared or separate valves • Operating modes: operating mode selected by means of the multifunction pushbutton with thermostat

Rated voltage: 230 VAC Switching power for 0.5 A valves 24 230 VAC

Outputs: • 3 potential-free contacts (fan) • 2 selector switches for valves

• Contents: Module comprises: • MTN645094 - KNX REG-K fan coil actuator


• SERVO MOTOR MODULE


SERVO MOTOR MODULE

The module comprises a thermostatic controller for opening and closing valves. For 2-point or PWM control of heating, airconditioning and ventilation devices, room-by-room control of surface heating systems, control of heating circuit distributors, radiators, convection heaters, ceiling-mounted air-conditioning units. • First-open function: the drive is open on delivery (NO). This allows the heating to be used even in the construction phase • Normally closed (NC) • Function display (opening, closing, intermediate steps)

• Power supply: KNX bus • • • •

Normally closed (NC) Function display (opening, closing, intermediate steps) Adaptor control Locking mechanism


24

Module comprises: • MTN639125 - Thermoelectric servo motor


• 8 LED MODULE

8 LED MODULE

The module comprises 8 green LEDs, each with two black converter sockets.

MD1AM3 035 Technical data Module comprises: • ZB6DV3 - Green rectangular LED head • 2B6M3B - Complete body for green LED


Rated voltage: 230 VAC

• ROOM TEMPERATURE THERMOSTAT


ROOM TEMPERATURE THERMOSTAT MODULE

The module comprises a KNX room temperature thermostat with display screen and 4 buttons. This thermostat can be used for heating and air-conditioning by means of proportional KNX EMO servo motors or for controlling switching or heating actuators. • Controller type: 2-point control, continuous PI adjustment, switched PI adjustment (PWM) • Output: continuous from 0 to 100% (1 byte) or on M/A switching • Controller mode: o heating/air-conditioning/heating and air-conditioning o 2-level heating o 2-level air-conditioning o 2-level heating and air-conditioning •

Operating modes: comfort, extended comfort, standby, night temperature reduction, frost-free/heat stress protection • All setpoint temperatures and operating mode saved on reset • Actual temperature adjustment and valve opening protection Module comprises: • ALB45154 - Temperature regulator • ALB45601 - Single-station bracket • ALB45650 - Single-function white plate



25

• 0 - 10 V ACTUATOR MODULE


0 - 10 V ACTUATOR MODULE

The module comprises an interface between the KNX bus and stabilisers/ transformers controlled by 0 - 10 V. KNX software functions • Range of dimming speeds and curves • Identical dimming time • Memory function • On/off time delay • Stairwell timer with/without manual stop function • Lighting environments (selection of up to 8 recorded light values) • Central function • Logical operators or forcibly guided

Rated voltage: 230 VAC Switching current: 16 A (cos = 0.6)

• • •

• Contents:

Interlock Status feedback message Response to bus voltage restoration


• INTESYS BOX GATEWAY MODULE

MD1AM3 039

INTESYS BOX GATEWAY MODULE

The module comprises a server-type KNX/ModBus interface. Up to 100 group addresses can be defined. ModBus 03 and 04 functions are used in read mode. ModBus 06 and 16 fu nctions are used in write mode.



26


• 10-INCH SCREEN MODULE


10-INCH SCREEN MODULE

The module comprises a KNX 10-inch touch screen. It is used for viewing and controlling building functions. Graphical user interface simulation in ETS and the dynamic plug-in make developing an intuitive user interface quick and easy. o Operating system used: Windows CE.NET o Additional functions • Time programmer with synchronisation via KNX or Internet • Presence simulation (sequence storage and recall) • Alarm management • Web browser • Automatic standby mode: freeze frame •


• •

• RJ45 Ethernet port

Photo slide show or screen power down Password protection User-configurable interface with LAN connection (10/100 Mbps), KNX connection and USB port; Built-in speaker

• Contents: Module comprises: • ALB08530 - RJ45 cable / RJ45 male l = 0.3 m • MTN683090 - IP 10" colour touch screen


• BLIND ACTUATOR MODULE

MD1AM3 041

BLIND ACTUATOR MODULE

The function of blind chann els can be configured freely. All blind outputs can be actuated manually by means of keys on the actuator's front panel. A green LED indicates the operating status.

o • • • • • • • • • •


KNX software functions: Slat management Operating time Dwell time Duration of each step Differentiated interlock functions Weather alarms 8-bit positioning for height and slats Sequences Manual/automatic function Differentiated information and status feedback functions

• Contents: Module comprises: • MTN648704 - Switching actuator • ABL8MEM24012 - 24 VDC module power supply



27

• 0-10 V ACTUATOR MODULE


0-10 V ACTUATOR MODULE

The module comprises an interface between the KNX bus and stabilisers/ transformers controlled by 0 - 10 V. KNX software functions • Range of dimming speeds and curves • Identical dimming time • Memory function • On/off time delay • Stairwell timer with/without manual stop function • Lighting environments (selection of up to 8 recorded light values) • Central function • Logical operators or forcibly guided

Rated voltage: 230 VAC Switching current: 16 A (cos = 0.6) • • •

• Contents:

Interlock Status feedback message Response to bus voltage restoration

One pair of jumpers (red and blue) Module comprises: • ALB08530 - Three-way control unit

Operational parts • 15 W LAMP BRACKET MODULE

MD1AMP 004 Technical data

15 W & 50 W LAMP BRACKET MODULE

The operational part comprises a 15 W incandescent lamp. It is designed to be used as a load on KNX modules, for example. It comprises: o o

A clear window for checking that the lamp is working Two black converter sockets for the 230 VAC power supply to the lamp

• Power supply:

They are available in two versions:


•

•

28


15 W lamp bracket operational part module MD1AMP 004 50 W lamp bracket operational part module MD1AMP 009

• ELECTRIC SHUTTER MODULE

MD1AMP 007

ELECTRIC SHUTTER MODULE

The operational part represents a motorised electric shutter. The electric shutter is controlled by two commands – "raise" and "lower". Automatic stop is available in the top position, shutter open, and bottom position, shutter closed. The control operates at 230 VAC. The module comprises:

Technical data

o

A motorised shutter mechanical system

• Power supply:

o home o


o o

• ROOM HEATER MODULE

MD1AMP 010

One LED simulating a lamp inside the Two black 4-mm converter sockets for the "raise" command One yellow LED indicating that the "raise" command has been issued Two black 4-mm converter sockets for the "lower" command

2 KW ROOM HEATER MODULE

The operational part comprises an electric radiator and 4-mm safety sockets for easy connection to the various control modules.

Technical data • Power supply:

Rated voltage: 230 VAC Power: 2000 W


29

• ROLLER SHUTTER MODULE

MD1AA VOLETR

230/400 V ROLLER SHUTTER MODULE

The module comprises a standard roller shutter which is raised and lowered by means of 4-mm safety sockets. Height: 600 mm Width: 550 mm



• VENETIAN BLIND MODULE

MD1AA STORE

VENETIAN BLIND MODULE

The module comprises a venetian blind with multiposition slats. The blind is controlled by an electric motor, which raises or lowers it, and by means of a rod for changing the position of the slats. The self-locking brake can stop the blind at any height.


Rated voltage: 24 VDC

30


Auxiliary parts • 24 VDC POWER SUPPLY MODULE

MD1AM4 001

24 VDC POWER SUPPLY MODULE

The modules are voltage converters; they can be used to deliver a 24 VDC power supply to the various modules.


Technical data

•

24 VDC - 2.5 A power supply module MD1AM4 001

•

24 VDC - 4.2 A power supply module MD1AM4 002

• Power supply:

Rated voltage: 230 VAC These are single-format modules. They comprise: o

• Contents:

o o

Power cable One pair of jumpers (red and blue)

o

• 230 VAC POWER SUPPLY MODULE

MD1AM2 001

One red converter socket labelled 24 V for the power supply One blue converter socket labelled 0 V One European-type socket for the line power supply One green LED labelled ON to indicate

230 VAC POWER SUPPLY MODULE

The module comprises a 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil. A power socket for connecting the power cord supplied A white "power on" LED indicates the module status

Technical data

An emergency stop button cuts off the power supply instantaneously.

• Power supply:


Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules

• Contents: Power cable One pair of black jumpers


31

DISCOVERY BATCHES The KNX BA BATCH, TCH, reference MD1AM 3BA, comprises: Designation

Reference

1

Bus power supply module

MD1AM3 001

1

System coupler module

MD1AM3 002

1

Switching actuator module with 4 outputs

MD1AM3 003

1

230V 4 binary input module

MD1AM3 004

1


MD1AM3 005

1

Programmable timer module

MD1AM3 006

1


MD1AM3 007

1

+ USB2 programming programming cable

1


MD1AM3 008

1

Artec double command module for white roller shutter

MD1AM3 009

1

Artec 8-key multifunctional module with IR + finishing plate

MD1AM3 010

1

Artec 4-key multifunctional module + finishing plate

MD1AM3 011

1

4-Button pushbutton module with thermostat

MD1AM3 017

1

Complete movement detector module + finishing plate

MD1AM3 013

1

Interior presence detector module

MD1AM3 014

1

2 binary input module

MD1AM3 015

1

Remote control

MTN570222

1

Single-phase protection module

MD1AM2 001

2

15 W lamp bracket modules

MD1AMP 004

1

Electric shutter operational part module

MD1AMP 007

1

Supporting structure

MD1AM 000

1

ETS4 Pro licence licence dongle

5

ETS4 Trainee Trainee licence dongles

Quantity

Technical data sheet

MD1ADM3 KNTNT

Technical and educational manual

MD1ADM3 KNXTP

+ CD-ROM

32


The KNX ENERGY EFFICIENCY BA BATCH, TCH, reference MD1AM 3EE, comprises: De D esignation

Reference

1

Bu B us power supply module

MD1AM3 001

1

Sw S witching actuator module with 4 outputs

MD1AM3 003

1

23 2 30 V 4 binary input module

MD1AM3 004

1

Va V ariable control actuator module

MD1AM3 005

1

Prrogrammable timer module P

MD1AM3 006

1


MD1AM3 007

1

+ USB2 programming cable

1

Arrtec 8-key multifunctional module with IR + finishing plate A

MD1AM3 010

1

Artec 4-key multifunctional module + finishing plate

MD1AM3 011

1

Complete movement detector module + finishing plate

MD1AM3 013

1

Interior presence detector module

MD1AM3 014

1

KNX/DALI gateway module

MD1AM3 020

1

Weather station module with associated sensor

MD1AM3 022

1

24 VDC/24 VAC power supply module

MD1AM3 023

1

TC T CP/IP interface module

MD1AM3 031

1

Single-phase protection module

MD1AM2 001

1

DALI operational part module

MD1AMP 021

2


MD1AMP 004

1


MD1AM 000

1

ETS4 Pro licence dongle

5

ETS4 Trainee licence dongles

Quantity


MD1ADM3 KNTNT


MD1ADM3 KNXTP

+ CD-ROM


33

Residential and small services modular offer Educational objectives: • To learn about and carry out component wiring • To To optimise energy consumption through the use of appropriate products • Installation maintenance maintenance

Electrical and mechanical data • Power supply: 230 V - 50 Hz / < 15 A • Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg

Main sectors • Electrical engineering • Civil engineering

Package presentation The residential and small services modular offer allows you to study and install the components of an electrical installation for the home and the small services sector. It consists of four educational batches designed to help you discover, learn and use the main functions encountered when implementing electrical installations in homes and in the small services sector. These batches are of increasing complexity and complement one another: • • •

•

The first batch allows you to create the functions encountered in a home of type T1/T2 The second batch, made up of products that complement the first batch, installs functions encountered in a home of type T3/T4 The third batch, again made up of products that complement the first two batches, covers the main functions encountered in a building in the small services sector. The fourth batch, referred to as the energy efficiency batch, covers all the economic and energy management aspects through the use of products such as programmers, light-sensitive switches, timers and timer switches.

Other sectors • All energy industries

The Residential and Small Services modular offer comprises: Designation DB90 circuit breaker panel module with tariff meter 1P + N 10 A circuit breaker module 1P + N 16 A circuit breaker module 1P + N 16 A residual current circuit breaker module 1P + N 20 A residual current circuit breaker module 16 A impulse relay module with integrated function Impulse relay module with central control auxiliary Programmable Programmabl e timer switch module 2 NO 25 A modular contactor module MIN'clic 1 to 7 min timer module

Circuit breaker panel module MD1AM6 001

Advance off warning module Light-sensitive switch module with IC200 sensor CDS single-phase load shedder module, 1 channel To-and-fro switch module Pushbutton module Illuminated pushbutton module Double pushbutton module 2P + T 10/16 A socket module Movement sensor module Timer module with advance off warning Room temperature sensor module TH4 3-threshold thermostat module

Pushbutton + LED module MD1AM6 016

34


RESIDENTIAL AND SMALL SERVICES •

CIRCUIT BREAKER PANEL MODULE WITH TARIFF METER

CIRCUIT BREAKER PANEL MODULE

The circuit breaker panel module comprises:

MD1AM6 001

• Incoming circuit breaker DB 90 with "selective residual current device" It is used at the head of the subscriber installation. Its rating can be set to 15/20/45 A. For operations it should be set to 15 A. The sensitivity of the residual current device (500 mA) protects users against indirect contact and installations against insulation faults.

Technical data

• Tariff meter This is used for counting electricity consumption. It differentiates between the various EDF tariffs (peak/off-peak periods, special tariffs, Tempo, etc. . .).

• Power supply:

It must be set to a rating of 15 A. Do not close the incoming circuit breaker until all the connections of the selected functions have been completed.


Module comprises: • 13120 - Two-pole circuit breaker DB90 • CR13MM11 - Energy meter

• 10 A CIRCUIT BREAKER MODULE

MD1AM6 002

1P + N 10 A CIRCUIT BREAKER MODULE

The module controls the circuits and overload and short-circuit protection for the line and for the downstream receivers.

Technical data Module comprises: • 20725 - D’clic 1P + N 10 A circuit breaker

• Power supply:



35

• 16 A CIRCUIT BREAKER MODULE

MD1AM6 003

1P + N 16 A CIRCUIT BREAKER MODULE

The module controls the circuits and overload and short-circuit protection for the line and for the downstream receivers.


Module comprises: • 20726 - D’clic 1P + N 16 A circuit breaker


• RESIDUAL CURRENT CIRCUIT BREAKER

MD1AM6 004

1P + N 16 A RESIDUAL CURRENT CIRCUIT BREAKER MODULE

The module controls the circuits and overload and short-circuit protection for the line and for the downstream receivers. It also protects:

Technical data

• •

Users against indirect or direct contact > = 30 mA Electrical installations against insulation faults

It trips instantaneously and provides total vertical discrimination in conjunction with an incoming circuit breaker with a selective residual current device.

• Power supply: Module comprises: • 20553 - 1P + N 16 A earth leakage circuit breaker


36


• RESIDUAL CURRENT CIRCUIT BREAKER


1P + N 20 A RESIDUAL CURRENT CIRCUIT BREAKER MODULE

The module controls the circuits and overload and short-circuit protection for the line and for the downstream receivers. It also protects: • •

Users against indirect or direct contact > = 30 mA Electrical installations against insulation faults

It trips instantaneously and provides total vertical discrimination in conjunction with an incoming circuit breaker with a selective residual current device.

• Power supply:


Module comprises: • 20554 - N 20 A earth leakage circuit breaker

• IMPULSE RELAY MODULE

MD1AM6 006

IMPULSE RELAY MODULE WITH INTEGRATED FUNCTION 16 A

The module enables a group of impulse relays to be controlled centrally whilst also allowing local pulse control. Central control refers here to the setting of a group of impulse relays to 0 or 1 by means of two pushbuttons.

Technical data Module comprises: • 15518 - 16 A impulse relay with integrated function

• Power supply:



37

• IMPULSE RELAY MODULE + CONTROL


IMPULSE RELAY MODULE WITH CENTRAL CONTROL AUXILIARY

Each pulse from a pushbutton reverses the operating state of the impulse relay, causing its contact to open or close. The central control auxiliary is positioned to the right of an impulse relay and secured by means of latches. It provides central control of the impulse relay whilst also allowing local control of each impulse relay.

• Power supply: Module comprises: • 15409 - Central control and signalling • 15510 - 16 A - 230 VAC single-pole impulse relay


• TIMER SWITCH MODULE


PROGRAMMABLE TIMER SWITCH MODULE

The programmable timer module (IHP) controls the opening or closing of one or more independent circuits on the basis of a program set by the user and stored in the memory. It can control circuits for lighting, heating, signage, access control, etc. . . Block programming for repetitive weekly switching operations, daylight saving option, memory space for 56 programs, holiday setting, override, etc. ..

• Power supply: Module comprises: • CCT16652 - Programmable timer switch


38


• 2 NO 25 A CONTACTOR MODULE

MD1AM6 009

2 NO 25 A CONTACTOR MODULE

Driven by the "off-peak" contact of the tariff meter, by a programmable timer, a load shedder, it controls a power circuit (water heating, heating, washing machine, etc. . .) It includes a three-position selector switch: temporary override, automatic mode, and stop.


Module comprises: • 15379 - 2-pole 25 A tariff meter off-peak contactor


• MIN' TIMER MODULE

MD1AM6 010

MIN'clic 1 TO 7 MIN TIMER MODULE

The module closes and then opens a contact after an adjustable preset time of up to 7 min. Override possible, continuously lit by means of a mini-selector switch on the product.


Module comprises: • 16655 - MIN’clic 16 A 1 to 7 min timer



39

• ADVANCE OFF WARNING MODULE

MD1AM6 011

ADVANCE OFF WARNING MODULE

Used in conjunction with a timer on an incandescent lighting circuit, it warns the user that the light is about to go out by reducing th e light intensity by 50% for an adjustable period of 20 to 60 seconds.

Technical data Module comprises: • CCT15233 - Advance off warning

• Power supply:


• SWITCH MODULE

MD1AM6 012

IC 200 LIGHT-SENSITIVE SWITCH MODULE

The module starts or stops a circuit (window lighting, illuminated sign, etc.) when the light threshold detected by the cell reaches the setting threshold: from 2 to 200 lux.

Technical data Module comprises: • CCT15284 - IC200 light-sensitive switch

• Power supply:


40


• CDS SINGLE-PHASE LOAD SHEDDER

MD1AM6 013 Technical data • Power supply:

CDS SINGLE-PHASE LOAD SHEDDER MODULE, 1 CHANNEL

If the current drawn exceeds the preset threshold, the load shedder positioned just after the incoming circuit breaker temporarily (for 5 to 10 min) sheds circuits identified as non-priority. This prevents the nuisance tripping of the incoming circuit breaker or allows the number of receivers to be increased without changing the subscribed power demand or the subscribed power demand to be reduced. This contactor sheds two circuits in cascade (I and II) and reconnects them in reverse order (II and I). The shed circuit is indicated by a yellow LED. It includes a forced load shedding input. The tripping set point can be set to: 5 / 10 / 15 / 20 / 25 / 30/ 40 / 45 / 50 / 60 / 75 and 90 A. It must not exceed the value to which the upstream incoming circuit breaker is set.


For safety reasons, and to comply with the wiring accessories used, do not set the load shedder to a rating above 15 A. As we have asked for the incoming circuit breaker to be set to 15 A maximum, the load shedder will not work if it is set above 15 A.

Module comprises: • 15903 - CDS load shedder contactor

• TO-AND-FRO SWITCH MODULE

MD1AM6 014

TO-AND-FRO SWITCH MODULE

Flush-mounted 2-channel switch, quick to install and connect; secured by means of screws and clamps. Degree of protection: IP20 • • IK02


Module comprises: • ALB74020 - Alcyon switch



41

• PUSHBUTTON MODULE

MD1AM6 015

PUSHBUTTON MODULE

Flush-mounted 1-channel pushbutton, quick to install and connect; secured by means of screws and clamps. Degree of protection: IP20 • • IK02


Module comprises: • ALB74030 - Alcyon single pushbutton


• ILLUMINATED PUSHBUTTON MODULE

MD1AM6 016

ILLUMINATED PUSHBUTTON MODULE

Flush-mounted 1-pole pushbutton with indicator light, quick to install and connect; secured by means of screws and clamps. Degree of protection: IP20 • • IK02

Technical data Module comprises: • ALB74035 - Illuminated pushbutton

• Power supply:


42


• DOUBLE PUSHBUTTON MODULE

MD1AM6 017

DOUBLE PUSHBUTTON MODULE

Flush-mounted 2-circuit NO/NC double pushbutton, quick to install and connect; secured by means of screws and clamps. Degree of protection: IP20 • • IK02

Technical data Module comprises: • ALB74080 - Double pushbutton

• Power supply:


• 2P + T 10/16 A SOCKET MODULE

MD1AM6 018

2P + T 10/16 A SOCKET MODULE

Standard flush-mounted 2-circuit electric socket with screw terminals for fast installation and connection; secured by means of screws and clamps. Degree of protection: IP20 • • IK02


Module comprises: • ALB74200 - 16 A socket



43

• MOVEMENT SENSOR MODULE


MOVEMENT SENSOR MODULE

Argus 360° polycarbonate movement sensor with a side sensing distance of 10 m and a front sensing distance of 16 m. It is installed on a ceiling 2.5 m above the ground. Technical data: • Settings: Adjustable light sensitivity and timer setting • Light intensity setting: 3 to 1000 lux Degree of protection: • IP55 • IK02

• Power supply:

Rated voltage: 230 VAC Module comprises: • MTN564419 - Movement sensor

• TIMER MODULE

MD1AM6 020

TIMER MODULE WITH ADVANCE OFF WARNING

The module closes and then opens a contact after an adjustable preset time of up to 7 min. Override possible, continuously lit by means of a mini-selector switch on the product.


Module comprises: • CCT15233 - Timer with advance off warning


44


• ROOM TEMPERATURE SENSOR


ROOM TEMPERATURE SENSOR MODULE

A comprehensive range of room temperature sensors is suitable for all requirements: public buildings, hotels, hospitals, schools and commercial centres. The sensor design makes them suitable for installation in the very latest buildings. Easy and flexible installation, mounted directly on the wall or on other supports. The sensors are compatible with Vista, Micronet/Sigma or Continuum.

• Power supply:


Module comprises: • CCT15846 - Temperature sensor

• TH4 THERMOSTAT MODULE

MD1AM6 030

TH4 3-THRESHOLD THERMOSTAT MODULE

The room temperature sensor module is installed in individual or multiple occupancy homes and in service sector buildings (no adjustment of the room temperature sensor). It adjusts the temperature between +8 and +26°C on the basis of 3 power (water heating, heating, washing machine, etc.) setpoints (comfort, reduced and frost-free . .) It includes a threeposition selector switch: temporary override, automatic mode, and stop.

Technical data LED indicators:

• • •

• Power supply:


Green LED: "frost-free" operation Yellow LED: "reduced" operation Red LED: output contact in on-position

Module comprises: • CCT15841 - TH4 3-threshold thermostat


45



15 W & 50 W LAMP BRACKET MODULE



• Power supply:



•

•

• ROOM HEATER MODULE

MD1AMP 010

2 KW ROOM HEATER MODULE

The operational part comprises an electric radiator and 4-mm safety sockets for easy connection to the various control modules.


Rated voltage: 230 VAC Power: 2000 W

46

15 W lamp bracket operational part module MD1AMP 004 50 W lamp bracket operational part module MD1AMP 009


• ROLLER SHUTTER MODULE

MD1AA VOLETR

230/400 V ROLLER SHUTTER MODULE

The module comprises a standard roller shutter which is raised and lowered by means of 4-mm safety sockets. Height: 600 mm Width: 550 mm




MD1AMP 007


The operational part represents a motorised electric shutter. The electric shutter is controlled by two commands – "raise" and "lower". Automatic stop is available in the top position, shutter open, and bottom position, shutter closed. The control operates at 230 VAC. The module comprises:

Technical data

o

A motorised shutter mechanical system

o home o

• Power supply:

Rated voltage: 230 VAC o o


One LED simulating a lamp inside the Two black 4-mm converter sockets for the "raise" command One yellow LED indicating that the "raise" command has been issued Two black 4-mm converter sockets for the "lower" command

47

Auxiliary part • 230 VAC POWER SUPPLY MODULE

MD1AM2 001


The module comprises a 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil. The power cord supplied can be plugged into a power socket. A white "power on" LED indicates the module status

Technical data

An emergency stop button cuts off the power supply instantaneously.

• Power supply:

Rated voltage: 230 VDC Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules


48


DISCOVERY BATCHES The DOMESTIC BATCH T1/T2, reference MD1AM6 121, comprises: Quantity

Designation

Reference

1

DB90/500 mA circuit breaker panel module with tariff meter

MD1AM6 001

3

1P + N 10 A circuit breaker modules

MD1AM6 002

1


MD1AM6 003

2


MD1AM6 004

1


MD1AM6 005

5

ALCYON to-and-fro switch modules

MD1AM6 014

4

10/16 A socket modules

MD1AM6 018

4


MD1AMP 004

1


MD1AM 000


MD1ADM6 MOD

+ CD-ROM

The DOMESTIC BATCH T3/T4, reference MD1AM6 122, comprises: Designation

Reference

1


MD1AM6 002

1


MD1AM6 003

2

1P + N 16 A residual current circuit breaker modules

MD1AM6 004

1

16 A impulse relay module with integrated function

MD1AM6 006

1

Impulse relay module with central control

MD1AM6 007

1


MD1AM6 008

1

2 NO 25 A modular contactor module

MD1AM6 009

2


MD1AM6 014

6

ALCYON single pushbutton modules

MD1AM6 015

1


MD1AM6 017

2


MD1AM6 018

5


MD1AMP 004

Quantity

1


MD1AM 000


MD1ADM6 MOD

+ CD-ROM


49

The SMALL SERVICES BATCH, reference MD1AM6 123, comprises: Quantity

Designation

Reference

1


MD1AM6 002

4


MD1AM6 003

4

2 NO 25 A modular contactor modules

MD1AM6 009

2

MIN’clic 1 to 7 mm timer modules

MD1AM6 010

1

Timer module with advance off warning

MD1AM6 020

1


MD1AM6 012

1

CDS single-phase load-shedding contactor module, 1 channel

MD1AM6 013

3

Illuminated single pushbutton modules

MD1AMP 016

1


MD1AM 000


MD1ADM6 MOD

+ CD-ROM

The RESIDENTIAL AND SMALL SERVICES BATCH, reference MD1AM6 126, comprises : Quantity

Designation

Reference

1

DB90/500mA circuit breaker panel module with tariff meter

MD1AM6 001

5


MD1AM6 002

6


MD1AM6 003

4

1P + N 16 A residual current circuit breaker modules

MD1AM6 004

1


MD1AM6 005

1

16 A impulse relay module with integrated function

MD1AM6 006

1

Impulse relay module with central control

MD1AM6 007

1


MD1AM6 008

5


MD1AM6 009

2


MD1AM6 010

1

Advance off warning module

MD1AM6 011

1


MD1AM6 012

1


MD1AM6 013

7


MD1AM6 014

6


MD1AM6 015

3


MD1AM6 016

1


MD1AM6 017

6


MD1AM6 018

9


MD1AMP 004

3

Supporting structures

MD1AM 000


MD1ADM6 DOM

+ CD-ROM BATCH MD1AM6 126 encompasses the whole of batches MD1AM6 121, MD1AM6 122 and MD1AM6 123

50


The RESIDENTIAL AND SMALL SERVICES ENERGY EFFICIENCY BATCH, reference MD1AM6 130, comprises: Designation

Reference

1

DB90/500 mA circuit breaker panel module with tariff meter

MD1AM6 001

2


MD1AM6 002

2


MD1AM6 003

1


MD1AM6 004

1


MD1AM6 008

2


MD1AM6 009

2

MIN’clic 1 to 7 mm timer modules

MD1AM6 010

1


MD1AM6 012

1


MD1AM6 013

2


MD1AM6 014

2


MD1AM6 015

3


MD1AM6 016

2


MD1AM6 018

1


MD1AM6 019

1

Room temperature sensor module

MD1AM6 029

1

TH4 thermostat module

MD1AM6 030

4


MD1AMP 004

1

Electric radiator module

MD1AMP 010

1


MD1AM 000

Quantity


MD1ADM6 MOD

+ CD-ROM


51

Global energy management

modules

Global energy management modules Solar modular offer .................................................................................................54 Control part modules ..........................................................................................................................................................55 Operational part modules .................................................................................................................................................58 Discovery batch .................................................. ........................................... ............................................ ..........................59

iRIO Telemetry modular offer .............................................................................. 60 Control part modules ........................................... ........................................... .......................................... .......................... 61 Operational part modules ..................................... ............................................ .............................................. ................. 66 Auxiliary part modules .......................................................................................................................................................67 Discovery batch ........................................... ........................................... ............................................ ................................ 69

Products comply with the provisions of European Directives Compliance report available on request All of our discovery batches are supplied with: •

Printed copy of the technical data sheet and specification

•

A CD containing PDF versions of these documents and the PLC applications

Safety leads are sold separately, see Additional modules and accessories section


53

Solar modular offer Educational objectives: • To find out the basics of energy production by solar panels • To learn about and identify the components

Electrical and mechanical data • Power supply: 12 VDC

Package presentation The Solar modular offer allows you to understand the production of energy by a solar panel. The various topics that can be covered are: • • • • • •

Identification of the equipment The design, sizing and installation of solar panels The properties of a solar panel, depending on the temperature, its tilt angle, sunlight level, etc. . . The use of an inverter The use of a controller The use of different battery charging and discharging modes

• Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg

The Solar modular offer comprises:

Main sectors • Electrical engineering • Civil engineering

Designation Ammeter/voltmeter module Shunt controller module 12 V battery module 230 VAC inverter module Solar panel module

Measurement module MD1AMS 001

Solar panel module MD1AMS 005

Supporting structure MD1AM 000

54

Controller module MD1AMS 002


Solar modules • AMMETER/VOLTMETER MODULE

MD1AMS 001 Technical data

AMMETER/VOLTMETER MODULE

The module measures current and voltage and comprises two measuring instruments: o o

Current measurement: Analogue galvanometer 0 - 500 mA Voltage measurement: Analogue galvanometer 0 - 30 VDC

Two red and blue 4-mm safety sockets located on the left of the enclosure for the upstream connection labelled "SOLAR CELL". Two red and blue 4-mm safety sockets located on the right of the enclosure for the downstream connection labelled "USE".

• Power supply: Rated voltage: 12 VDC

This module can be connected between: The solar panel and the controller to measure the solar panel's output voltage and output current. The controller and the battery to measure the battery's charging voltage and charging current.


• SHUNT CONTROLLER MODULE

MD1AMS 002

SHUNT CONTROLLER MODULE

The controller module comprises an electronic controller circuit. Control type: Series The controller stops charging when the final charging voltage of the lead battery is reached (13.9 V). Charging resumes when the voltage at the battery terminals drops below 13 V.

Technical data

• -

• Power supply: -

Rated voltage: 12 VDC Battery voltage: 12 - 14 VDC Maximum power: 50 W Final charging voltage: 13.9 VDC Controller power consumption: 0.6 mA

• -


-


RED "Charge" LED The red LED lights up when the charger (solar panel) voltage is high enough to charge the battery. The red LED is off when the charger voltage is lower than the battery voltage.

GREEN "OK" LED The green LED lights up when the final charging voltage is reached. Battery charged The green LED is off when the final charging voltage has not been reached.

55

• 12 VDC BATTERY MODULE

MD1AMS 003

12 V 2.3 Ah OR 2.1 Ah BATTERY MODULE

The module comprises a 12 V lead battery. The battery capacity is 2.3 Ah or 2.1 Ah, depending on the supplier. Two fuse holders with fuses are located upstream and downstream of the battery. They protect th e battery against overcurrent and short-circuits. Fuse type: 5 x 20 F4 A 250 V

Technical data Two red and blue 4-mm safety sockets located on the left of the enclosure for the upstream connection labelled "+ and –".

• Power supply: Rated voltage: 12 VDC Output voltage: 12 VDC

Two red and blue 4-mm safety sockets located on the right of the enclosure for the downstream connection labelled "+ and –".

• Contents:

This module can be connected between: The controller and the inverter The measurement module and the inverter


• 230 VAC INVERTER MODULE

MD1AMS 004

The inverter comprises a 12 VDC - 230 VAC converter. The inverter converts the 12 V DC voltage supplied by the battery to a 230 V AC voltage. • -


230 VAC - 30 W INVERTER MODULE

-

GREEN LED: The green LED lights up when power is supplied to the inverter (12 VDC voltage). In this case there is an output voltage of 230 VAC, at the black terminals. The green LED goes out when the input voltage is insufficient for the inverter to work.

Rated voltage: 12 VDC Output voltage: 230 V - 50 Hz Output power (continuous): 30 W Apparent power: 30 VA Maximum output power (5 min): 40 W No-load inrush current < 0.35 A

Two red and blue 4-mm safety sockets located on the left of the enclosure for the upstream connection labelled "INPUT 12 VDC". Two red and blue 4-mm safety sockets located on the right of the enclosure for the downstream connection labelled "OUTPUT 230 VAC".


56

This module is connected between the battery and the lamp.


• SOLAR PANEL MODULE

MD1AMS 005 Technical data • Power supply:

SOLAR PANEL MODULE

The polycrystalline solar panel module consists of an aluminium frame within which is fixed a rectangular one-piece element containing the photovoltaic cells. A terminal block is fixed to the rear of the panel. It is fitted with red and blue cables, with 4-mm safety connectors (cable length: 1 m) for fast connection to the various modules. When the solar panel is exposed to sunlight (or an appropriate light source), it supplies electrical energy which after being regulated is used to recharge a 12 V battery. The energy stored in the battery is consumed by a 12 VDC - 230 VAC inverter, which powers a 230 VAC - 15 W or 50 W lamp.


• Dimensions (H x L x D) – weight:

Structure: 301 x 356 x 28 mm – 1.5 kg

This solar panel can be laid or fixed in an appropriate position facing the sun.


57



15 W LAMP BRACKET MODULE



• Power supply: o


• 50 W LAMP BRACKET MODULE


Two red and two black converter sockets for KNX bus transmission.

50 W LAMP BRACKET MODULE

The operational part comprises a 50 W incandescent lamp. It is designed to be used as a load on KNX modules, for example. It comprises: o o lamp

A clear window for checking that the lamp is working Two black converter sockets for the 230 VAC power supply to the

• Power supply:


58

o


Two red and two black converter sockets for KNX bus transmission.

DISCOVERY BATCH The SOLAR BATCH, reference MD1AML SOL, comprises: Quantity 1 1

Designation

Reference

Ammeter/voltmeter module

MD1AMS 001 MD1AMS 002

Controller module

1

12 V battery module

MD1AMS 003

1

230 VAC - 30 W inverter module

MD1AMS 004

1

Solar panel module

MD1AMS 005

1

15 W lamp bracket module

MD1AMP 004

1


MD1AM 000


MD1ADML SOL

+ CD-ROM


59

iRIO Telemetry modular offer Educational objectives: • To optimise energy consumption by viewing the distribution of consumption by type of use (fluid, electricity) • To configure an installation so as to optimise energy consumption whilst also improving the comfort of occupants • To learn about the constraints of RT2012 • To implement a remote management solution

Electrical and mechanical data • Power supply: 240 V ~ single-phase

• Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg Double module: 244 x 300 x 70 mm – 1.4 kg

Package presentation The central element of the Telemetry modular offer is an iRIO controller, which collects and stores the data generated by energy and fluid meters or sensors (temperature, pressure, etc. .). The iRIO controller can manage various data types, including pulses, Modbus serial link, M-Bus open communication or analogue data (0-10 V, PT100, PT1000, etc. .). Using a simple web browser it can operate and control an installation remotely and can centralise the remote management and monitoring of operations via a single, easy-to-use interface. Smart interface modules (SIM) with integrated digital inputs/outputs and analogue inputs allow the use of mixed architectures combining wired solutions and wireless Zigbee solutions. The collected data can be viewed in the form of mimic diagrams, management charts and graphs. The iRIO controller can also provide simple control and feedback control functions (control of contactors within a time slot, chrono-proportional control of electric heating, etc. .)

Main sectors • Vocational baccalaureate (science and technology of industry and sustainable development (STI2D), electrical engineering, energy and communication equipment (ELEEC) . .) • BTS (vocational training certificate) in electrical engineering (ET), fluids, energies, environments (FEE . .) • University institute of technology, electrical engineering, electronics and industrial computing

The iRIO Telemetry modular offer comprises: Designation Single-phase protection module Three-phase protection module

Other sectors

Power meter module - PM9

• BTS (vocational training certificate) in design & implementation of automated systems (CSRA) and industrial control & automatic regulation (CIRA) . . • University institute of technology, industrial engineering & maintenance and physical measurements

3 CT module EGX300 gateway module iRIO controller module Modbus interface module (SIM10M) Zigbee interface module (SIM10Z) EGX105Z gateway module Wi-Fi router module

iRIO controller module MD1AM2 006 Supporting structure MD1AM 000 60


Power meter module MD1AM2 003

iRIO Telemetry modules • SINGLE-PHASE PROTECTION MODULE

MD1AM2 001

230 VAC SINGLE-PHASE PROTECTION MODULE

This protection module is a single-format module. It comprises: o

Technical data • Power supply: Rated voltage: 230 VDC

A 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil o A power socket for connecting the power cord supplied o A white "power on" LED indicates the module status o An emergency stop button cuts off the power supply instantaneously o Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules Module comprises: • ZB6AS834 - Emergency stop button • ZB6Z2B - Complete body with NC contact • ZB6AV1 - Round white LED head • ZB6EM1B - White LED body 230V • ZB6Y009 - Sub-base for body • 24201 - C60N 10 A two-pole circuit breaker • 26509 - VIGI C60N two-pole block 30 mA - 25 A • 26960 - MN undervoltage release 230 VAC


• THREE-PHASE PROTECTION MODULE


THREE-PHASE PROTECTION MODULE

The three-phase protection module is a single-format module. It comprises: o o o o

A 10 A - 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil A power socket for connecting the power cord supplied A white "power on" LED indicates the module status An emergency stop button cuts off the power supply instantaneously o


Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules

Module comprises: • ZB6AS834 - EMERGENCY STOP button • ZB6Z2B - Complete body with NC contact • ZB6AV1 - Round white LED head • ZB6EM1B - White LED body 230 V • ZB6Y009 - Sub-base for body • 24214 - C60N 10 A three-pole circuit breaker • 26518 - VIGI C60N three-pole block 30 mA - 25 A • 26960 - MN undervoltage release 230 VAC



61

• POWER METER MODULE


POWER METER MODULE

The module is an electrical measurement and energy meter device for 1Ph + N, 3Ph and 3Ph + N low-voltage systems. The functions provided by a power meter have the necessary measurement capabilities for monitoring an electrical installation, including current, voltage, power, power factor, frequency and energy. The key features of power meters are as follows: o Monitoring of electrical parameters such as I, In, U, V, energy quality standards, E, FP, Hz o Power/current demand, peak demand

• Power supply: o o o o


o

• Contents:

Module comprises: • METSEPM3250 - PM3250 power meter • ALB08530 - RJ45 cable / RJ45 male Cat5

RJ45 Ethernet cable

• 3 CT MODULE


Time and date stamped alarms Minimum/maximum Management of up to 4 tariffs Up to 2 digital inputs and 2 digital outputs Modbus communication

3 CT MODULE

The module is a current transformer (CT). It is suitable for the entire lowvoltage range, from 40 to 6000 A. The primary current can be measured in two different ways: CT with through primary or with primary connection by means of bolt and fixing nut. o Wide choice of ratings from 40 to 6000 A o Safety: Sealable insulating cover o Installation: on DIN rail, mounting plate or busbars

• Power supply: Module comprises: • 16451 - 50 A toroidal core

Rated voltage: 230 VDC Current transformation ratio: 50/5

62


• EGX300 GATEWAY MODULE


EGX300 GATEWAY MODULE

The EGX300 module is used as an Ethernet gateway for devices communicating via the Modbus RS485 protocol. It also offers some additional functions including display of raw data via web pages. o o o o

10/100 Base TX Ethernet port RS485/RS232 (2-wire or 4-wire) serial port Embedded web server Short-term data storage

• Power supply: Rated voltage: 230 VDC Module comprises: • EGX300 - Embedded gateway server • ALB08530 - RJ45 cable / RJ45 male

• Contents: RJ45 Ethernet cable

• iRIO CONTROLLER MODULE


iRIO CONTROLLER MODULE

The module is an iRIO controller, which is used for: • Concentrating data/measurements (Modbus, Ethernet and serial communication, logical and analogue inputs/outputs) • Local storage of this data (with time and date stamping) • Processing o Simple mathematical calculations o Alarm detection and time and date stamping (notification via email or SMS with GSM modem) o Simple load management • Information publishing o Customer-defined management charts o Energy management graphs

Rated voltage: 24 VDC • o

• Contents: One pair of jumpers (red and blue) Coaxial cable RJ45 Ethernet cable

With embedded web browser Parameter setting and display

Module comprises: • TMYAAHRP00011 - iRIO GSM controller • ALB08530 - RJ45 cable / RJ45 male Cat5


63

• MODBUS INTERFACE MODULE (SIM10M)


MODBUS SLAVE INTERFACE MODULE (SIM10M)

The Modbus slave module METSIM10M is connected to the EGX300 gateway in Modbus slave mode. o o o o

6 digital pulse or status inputs 2 analogue inputs 2 digital outputs 24 V power supply

• Power supply: Rated voltage: 24 VDC Module comprises: • METSIM10M - Modbus slave interface

• Contents: One pair of jumpers (red and blue) RJ45 Ethernet cable

• ZIGBEE INTERFACE MODULE (SIM10Z)


ZIGBEE MODBUS INTERFACE MODULE (SIM10Z)

The data gathered by this SIM10Z module is retrieved directly from the iRIO controller (site management) or from the EGX300 portal server (remote management) or from an EGX100 Ethernet portal via wired or wireless networks. • Modbus RS485 wired protocol o The SIM module is connected to the iRIO controller or to the EGX100 or EGX300 Ethernet/RS485 portals via a shielded twisted pair. • o


• o o o

• Contents: RJ45 Ethernet cable One pair of jumpers (red and blue)

64

ZigBee wireless protocol Widely used for radio frequency WPANs (wireless personal area networks). The SIM modules are connected to a specific EGX105Z Ethernet/ZigBee portal via a ZigBee RF network. This module comprises: 6 digital pulse or status inputs 2 analogue inputs 2 digital outputs

Module comprises: • METSIM10Z - ZigBee/ModBus master interface


• EGX105Z GATEWAY MODULE


EGX105Z GATEWAY MODULE

The Ethernet/ZigBee gateway module EGX105Z is a Modbus/TCP/IP web server. It is used for: o Remote access to local I/Os on each master or battery-powered ZigBee SIM module (Modbus emulation mode) o Routing of Modbus frames exchanged with the higher-level monitoring and control software ("Modbus tunn elling" mode)

• Power supply: Rated voltage: 24 VDC Module comprises: • METEGX105Z - Ethernet/ ZigBee gateway server

• RJ45 Ethernet port • Contents: One pair of jumpers (red and blue)

• WI-FI ROUTER MODULE

MD1AM2 010

WI-FI ROUTER MODULE

The Wi-Fi router module is a set of wireless communication protocols governed by IEEE 802.11 group standards (ISO/IEC 8802-11). It allows the wireless connection of multiple devices (computer, touch pad) within a computer network to enable them to transmit data to one another.



RJ45 Ethernet cable


65

Operational parts • WATER METER MODULE

MD1AMP 017

WATER METER MODULE

The water meter module consists of a measuring device for assessing the water consumption of an installation. A water meter is based on the principle that the volume of water flowing through a pipe cannot be accurately measured: therefore the actual flow rate is estimated. The only reliable method would be to measure the volume introduced into a container over a defined period.

Technical data The cost of water treatment is very high. Consumers are increasingly being required to monitor and accurately calculate their water consumption. The installation of individual water meters (in homes, businesses and industry, local authorities, etc.) is inevitable, although there is still disagreement about the best way to achieve it.



• PT100 TEMPERATURE MODULE


PT100 TEMPERATURE MODULE

The PT100 temperature module has a resistance of 100 Ohms at 0°C and 138.5 Ohms at 100°C. The Pt100 is no longer sufficient for meteorological characterisation. The platinum resistance sensor (or platinum resistance thermometer PRT) defined as an interpolation instrument by ITS-90 (International Temperature Scale of 1990) is the most sophisticated and can be used for very h igh-precision measurements. This sensor is used in conjunction with interpolating polynomials corresponding to the temperature range in question as a means of establishing the relation between platinum resistance and temperature.

• Power supply: Rated voltage: 24 VDC This sensor has a resistance of 25 Ohms at the triple-point temperature of water and a resistance of around 41 Ohms at the fixed-point temperature of indium (156.5985°C)


66


Auxiliary parts • 24 V POWER SUPPLY MODULE

MD1AM4 001

POWER SUPPLY MODULES

The module is a voltage converter; it can be used to deliver a 24 VDC power supply to the various modules.

Technical data

This is a single-format module. It comprises: o

• Power supply:

o o


o

One red converter socket labelled 24 V for the power supply One blue converter socket labelled 0 V One European-type socket for the line power supply One green LED labelled ON to indicate power on

• Contents: One pair of jumpers (red and blue) Power cable

• MODBUS FIELD DISTRIBUTOR MODULE


MODBUS FIELD DISTRIBUTOR MODULE

The Modbus field distributor module is a single-format module. It comprises: • o o o

A Modbus splitter box 8 x RJ45 connectors 1 x RJ45 IN connector 1 x RJ45 OUT connector


• 10 Modbus ports



67

•

VARIABLE SPEED DRIVE CONTROL MODULE

VARIABLE SPEED DRIVE CONTROL

This module is used for controlling a variable speed drive. It comprises:

MD1AM7 001

o o o

Technical data

4 red and blue converter sockets for the 24 VDC power supply to the module One green 24 VDC LED with 2 black converter sockets 4 manual selector switches labelled LI1 to LI4 are used for controlling the variable speed drive and for selecting preprogrammed speeds. They have 4 yellow converter sockets and 1 red converter socket.


o

o

• Contents:

1 x 2.2  potentiometer with 3 black converter sockets for analogue control of the variable speed drive 1 x 0-10 V digital display with 2 red and blue converter sockets for displaying the variable speed drive's analogue output


• ALTIVAR 312 MODULE

MD1AM5 001 Technical data • Power supply: Rated voltage: 240 VAC single-phase Motor: 230 - 400 V 180 W max. Delta connection


240 VAC - 0.18 KW ALTIVAR 312 MODULE

This is a single-format module. It comprises: • A 312 variable speed drive for three-phase asynchronous motors Supply voltage: 240 VAC Maximum power: 0.18 kW Communication: Modbus and CANopen Display and knurled adjustment knob o 3 converter sockets (black, blue and green/yellow) for connecting the input line o 4 converter sockets (black and green/yellow) for connecting the asynchronous motor o 4 yellow converter sockets labelled LI1 to LI4 for connecting the 2-wire or 3-wire control and preprogrammed speeds, and 1 red converter socket labelled +24 V. o 2 green converter sockets labelled R1AR1C for connecting the NO auxiliary contact o 2 green converter sockets labelled AOCCOM for connecting the analogue output o 3 converter sockets (red, yellow and blue) for connecting the analogue input Module comprises: • ATV312H018M2 - 0.18 kW variable speed drive

68


DISCOVERY BATCH The iRIO TELEMETRY BATCH, reference MD1AML iRIO, comprises: Designation

Reference

1

Power meter module - METSEPM3250

MD1AM2 003

1

+ Câble RJ45

1

3 CT module

MD1AM2 004

1

iRIO controller module

MD1AM2 006

1

+ RJ45 cable

1

Modbus Slave interface module (SIM10M)

1

+ RJ45 cable

1

Zigbee Modbus interface module (SIM10Z)

1

+ RJ45 cable

1

EGX105Z gateway module

MD1AM2 009

1

Wi-Fi router module

MD1AM2 010

1

Modbus field distributor module

MD1AM0 011

1

24 VDC - 2,5 A power supply module

MD1AM4 001

1

Water meter module

MD1AMP 017

1

Temperature sensor module

MD1AMP 018

1


MD1AM 000

Quantity

MD1AM2 007

MD1AM2 008


MD1ADM xxx


MD1ADM xxx

+ CD-ROM


69

Process and machine management

modules

Process and machine management modules Automation system modular offer ......................................................................72 Control part modules ..........................................................................................................................................................73 Operational part modules .................................................................................................................................................82 Auxiliary part modules ............................................................................... .............................................. ......................... 86 Discovery batches ...............................................................................................................................................................87

Motor starter modular offer ................................................................................. 90 Control part modules ........................................... ........................................... .......................................... .......................... 91 Operational part modules ..................................... ............................................ .............................................. ................ 101 Auxiliary part modules .....................................................................................................................................................103 Discovery batches .............................................................................................................................................................105 Variable speed drive modules .............................................. ........................................... ............................................ . 100

Machine safety modular offer............................................................................. 108 Control part modules ........................................... ........................................... .......................................... ....................... 109 Operational part module ..................................................................................................................................................112 Auxiliary part modules ......................................................................................................................................................113 Discovery batch ......................................................... ............................................ ............................................ .................115

Products comply with the provisions of European Directives Compliance report available on request All of our discovery batches are supplied with:

• Printed copy of the technical data sheet and specification • A CD containing PDF versions of these documents and the PLC applications Safety leads are sold separately, see Additional modules and accessories section


71

Automation system modular offer Educational objectives:

Package presentation

• To study and implement the various types of PLCs • To study the human-machine interface • To learn about the fundamental principles of communication

The Automation system modular offer enables you to understand:

Electrical and mechanical data

• •

• Power supply: 230 V ~ single-phase + earth • Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg Double module: 244 x 300 x 70 mm – 1.4 kg

Depending on the chosen modules, the user will be able to find out about the various programming types, communication functions and control functions. This offer can be used to build automation system architectures, implementing the most commonly used components and communication networks.

• •

The various types of programmable logic controllers (TWIDO, M340 and PREMIUM) The buses and industrial networks (Modbus, CANopen, ASi, Ethernet) The various types of human-machine interface terminals Communication between PLCs, variable speed drives, interconnected motor starters and HMI tools

Main sectors • Electrical engineering • Industrial engineering and maintenance

The Automation system modular offer comprises: Designation

Other sectors

ZELIO PLC module

• Industrial science and technology

M340 PLC module

TWIDO PLC module Premium PLC module 16 discrete input PLC interface module 16 discrete output PLC interface module 4 analogue input/output PLC interface module XBTR411 panel control module XBTGT4340 panel control module Ethernet hub module Modbus field distributor module XBTGTW450 panel control module Premium PLC module with counter High-speed counter module USB interface simulator module HMISTU855 terminal module ZELIO COM PLC module


72

M340 PLC module MD1AM0 003


TWIDO PLC module MD1AM0 002

PLC modules • ZELIO PLC MODULE

ZELIO PLC MODULE

The ZELIO PLC module is a double-format module. It comprises:

MD1AM0 001

•

Technical data

•


On the left-hand side, a ZELIO SR3 B261BD PLC featuring: o 10 x 24 VDC discrete inputs o 6 discrete or analogue inputs o 8 x 8 A relay outputs o 2 x 5 A relay outputs On the right-hand side: o A set of 10 switches with associated converter sockets 4-mm safety sockets for the discrete inputs o A set of 4-mm safety sockets for the discrete or analogue inputs o A set of 4-mm safety sockets for the outputs

• 16 discrete inputs / 10 discrete outputs This module is connected to t he operational parts by means of 4-mm safety sockets and/ or 25-pin and 37-pin D-sub connectors

• Contents: One pair of jumpers (red and blue) Programming software and PC connecting cable supplied

Module comprises: • SR3B261BD - ZELIO module • SR2USB01 - USB cable for ML/PC

• TWIDO PLC MODULE


TWIDO PLC MODULE

The TWIDO PLC module is a single-format module. It comprises: • A TWIDO PLC comprising: o o o -

A TWIDO TWDLMDA40DTK processor, with: 24 x 24 VDC discrete inputs 16 transistor outputs with a 3000-instruction memory 1 RS485 serial port An integrated display module TWD XCP ODM An optional RS485 serial port integrated into the display module


•

• 16 discrete inputs / 10 discrete outputs (HE10)

An HE10 26-pin connection interface ensuring compatibility with 16 input/ output modules

Module comprises: • TWDLMA40DTK - TWIDO 40 I/O base • TWDNAC485D - RS485 link module • TWDXCPODM - Integrated display module • 499TWD01100 - Ethernet coupler module • TSXCDP053 - HE10 I/O card connecting cable



73

• M340 PLC MODULE


M340 PLC MODULE

The M340 PLC module is a double-format module. It comprises: • o -

An M340 PLC comprising: 4-module rack BMX XBP 0400 BMX P34 2020 processor with: 1 Modbus port and 1 Ethernet port BMX CPS 2010 24 VDC 16.8 W power supply module 16 discrete input/16 transistor output module BMW DDM3202K USB-USB cable for PC programming 20-pin HE10 discrete I/O cable Cache (analogue module option) • -


Analogue I/O option 4 analogue input/2 analogue output module with terminal block and leads with 25-pin D-sub socket

• 16 discrete inputs / 10 discrete outputs (HE10)

Module comprises: • BMXXBP0400 - 4-slot rack • BMXCPS2010 - 24 VDC power supply • BMXP342020 - Ethernet TCP/IP processor • BMXDDM3202K - 32 discrete I/O 24 VDC card • BMXFCC053 - HE10 I/O card connecting cable • BMXXCAUSBH018 - USB PC/processor lead


• PREMIUM PLC MODULE


PREMIUM PLC MODULE

This PREMIUM PLC module is a double-format module. It comprises: • o o o o o o o

A PREMIUM PLC comprising: Extendable 6-module rack with Bus X line terminators TSXP57103M and TSXETY5103 processor TSX PSY1610M 24 VDC power supply module TSX DEY32D2K 32 discrete input module on HE10 connector 32 transistor output module TSX DSY32T2K on HE10 connector 2 x 20-pin HE10 leads Cable

• Power supply: Module comprises: • TSXRKY6 - 6-slot rack • TSXPSY1610M - 24 VDC power supply • TSXP57103M - 32 Kword processor • TSXETY5103 - Ethernet coupler module • TSXDEY32D2K - 32 discrete input card • TSXDSY32T2K - 32 discrete output card • TSXCDP053 - HE I/O card connecting cable • TSXCRJMD25 - Mini RJ45/PC cable • TSXCUSB485 - USB converter


• 16 discrete inputs / 10 discrete outputs (HE10) • Contents: One pair of jumpers (red and blue) PC connecting cable supplied

74


• 16 DISCRETE INPUT PLC INTERFACE


16 DISCRETE INPUT PLC INTERFACE MODULE

The 16-input PLC interface module is a single-format module. It comprises: -

16 simulation switches for each input 16 yellow status LEDs 16 yellow 4-mm safety sockets for wiring each input 2 x 20-pin HE10 connectors for connection to the PLC 1 x 37-pin D-sub connector for connection to compatible operational parts

• Power supply: Rated voltage: 24 VDC • 16 inputs/10 outputs on 4-mm safety sockets

• 37-pin D-sub connector • Contents: One pair of jumpers (red and blue)

CAUTION: Not compatible with the ZELIO (MD1AM0 001) PLC module

• 16 DISCRETE OUTPUT PLC INTERFACE


16 DISCRETE OUTPUT PLC INTERFACE MODULE

This 16-output PLC interface module is a single-format module. It comprises:

16 green status LEDs 16 green 4-mm safety sockets for wiring each relay output 2 black 4-mm safety sockets for common connection of relay outputs 2 safety straps for bridging common connectors on 24 VDC 2 x 20-pin HE10 connectors for connection to the PLC 1 x 25-pin D-sub connector for connection to compatible operational parts

• Power supply: Rated voltage: 24 VDC • 16 inputs/10 outputs on 4-mm safety sockets

• 25-pin D-sub connector • Contents: One pair of jumpers (red and blue) One pair of black jumpers


75

• 4 I/O PLC INTERFACE MODULE


4 ANALOGUE INPUT/OUTPUT PLC INTERFACE MODULE

The 4 analogue input/output PLC interface module is a single-format module. It comprises: • o

o

On the left-hand side: 1 x 10 K Ohm potentiometer with graduated scale and 3 associated black 4-mm safety sockets 2 4-mm safety sockets (red and blue) supplying a fixed voltage of 10 VDC 500 mA 8 yellow 4-mm safety sockets for the 4 analogue inputs

o

1 x 25-pin D-sub connector for connection to the PLC

o


• 0 – 10 V variable

• o

• Digital voltmeter

o

• Contents:

o


o

• XBTR411 PANEL CONTROL MODULE


On the right-hand side: 1 digital voltmeter with needle, 0 - 10 VDC, with two associated 4-mm safety sockets (red and blue) 1 x 500-Ohm fixed resistor with two associated black 4-mm safety sockets for current measurement (0 - 20 mA or 4 - 20 mA) 8 green 4-mm safety sockets for the 4 analogue outputs 1 x 25-pin D-sub connector for connection to the PLC

XBTR411 PANEL CONTROL MODULE

This XBTR panel control module is a single-format module. It comprises: A Magelis XBTR411 operator interface terminal: o o o

4 x 20 alphanumerical character lines 8 "System" keys 12-key numeric keypad with LEDs

25-pin D-sub connector for connection to the PLC or programming PC

• Power supply: Rated voltage: 24 VDC Module comprises: • XBTR411 - 4-line compact terminal • XBTZ938 - M340 PLC connecting cable • XBTZ968 - TSX57 PLC connecting cable • XBTZ925 - PC/MAGELIS connecting cable • TSXCUSB485 - USB/RS485 converter

• 25-pin D-sub connector • Contents: One pair of jumpers (red and blue)

76


• XBTGT4340 PANEL CONTROL MODULE


XBTGT4340 PANEL CONTROL MODULE

The XBTGT panel control module is a double-format module. It comprises: • • o o o o o o o

A graphic operatorinterfaceterminalwith touch screen XBTGT 4340 A 7.5-inch TFT graphic touch screen (640 x 480) 2 serial ports (COM1 and COM2) 1 USB port 32 MB of application memory Slot for Compact Flash memory card Composite video input Audio input Embedded Ethernet port (RJ45)

Rated voltage: 24 VDC • RCA Video IN connector • Audio IN jack connector

• Contents:

Module comprises: • XBTGT4340 - Graphic terminal • ALB8531 - RJ45/RJ45 Cat. cable

One USB 1.1/2.0 cable One pair of jumpers (red and blue)

• ETHERNET HUB MODULE


ETHERNET HUB MODULE (SEE ALVIDIS HUB)

This Ethernet hub module is a single-format module. It comprises: -

A 4-port Ethernet switch 10 Base-T Ethernet or 100 Base-Tx Fast Ethernet Auto MDI/MDI-X (crossover cable detection) 1 green LED for each port: Link/Data and 100 Mbps mode indicator 1 general on/off indicator


Module comprises: • VDI533009 - 4+1 Ethernet switch • VDI517009 - Power supply connector

• 4 x 10/100 Ethernet ports



77

• MODBUS FIELD DISTRIBUTOR MODULE

MD1AM0 011

MODBUS FIELD DISTRIBUTOR MODULE

The Modbus field distributor module is a single-format module. It comprises: • o o o

A Modbus splitter box 8 x RJ45 connectors 1 x RJ45 IN connector 1 x RJ45 OUT connector

Technical data • Power supply: Rated voltage: 24 VDC Module comprises: • LU9GC3 - MODBUS splitter box

• 10 Modbus ports • Contents: One pair of jumpers (red and blue)

• XBTGTW450 PANEL CONTROL


XBTGTW450 PANEL CONTROL MODULE

The XBTGTW450 panel control module is a double-format module. It comprises: • • o o o o o o o

A graphic operator interface terminal with touch screen XBTGTW 450 An 8.4-inch, 262144-colour TFT graphic touch screen 2 serial ports (COM1 and COM2) 4 USB ports 2 RS232 512 MB to 1024 MB RAM Celeron M@ 600 MHz processor Slot for Compact Flash memory card 2 embedded Ethernet ports (RJ45)


Module comprises: • XBTGTW450 - Graphic touch screen terminal • XBTZ968 - PLC connecting cable

• Contents: One USB 1.1/2.0 cable

• ALB08532 - Straight RJ45/RJ45 cat. cable


78


• PREMIUM PLC MODULE


PREMIUM PLC MODULE WITH COUNTER

The PREMIUM PLC module with counter is a double-format module. It comprises: • o o o o o o o

A PREMIUM PLC comprising: Extendable 8-module rack with Bus X line terminators TSXP57103M & TSXETY5103 processor TSX PSY1610M 24 VDC power supply module TSX DEY32D2K 32 discrete input module on HE10 connector TSX DSY32T2K 32 transistor output module 2 x 20-pin HE10 leads Cable

Rated voltage: 24 VDC Module comprises: • TSXRKY6 - 8-slot rack • TSXAEY800 - 8 x 12-bit analogue input card • TSXASY800 - 8 x 12-bit analogue output card • TSXCTY2A - 2-channel counter module • TSXCAP100 - TELEFAST analogue cable

• 16 discrete I/O on HE10 connectors • Contents: One pair of jumpers (red and blue)

• HIGH-SPEED COUNTER MODULE


HIGH-SPEED COUNTER MODULE

The HIGH-SPEED COUNTER module is used for counting parts or events, grouping objects, incoming or outgoing flow control, and measuring the lengths or positions of items. It is a single-format module. It comprises: • o o o

One 15-pin D-sub connector per channel: Counter sensors or incremental encoder Sensor power supply Encoder power supply feedback for checking that it is supplied correctly

• Power supply:

• o o o


• o

• Contents:

20-pin 2-channel HE10 connector Auxiliary inputs: preset, enable Reflex outputs Power supplies for auxiliary I/O and incremental encoders These counter modules differ in terms of the number of channels: 2 and 4 channels

Module comprises: • TSXCDP301 - Preformed cable with leads



79

• USB INTERFACE SIMULATOR MODULE

MD1AM0 015

USB INTERFACE SIMULATOR MODULE

The USB interface simulator module connects the 3D SIMULATOR software tool to the M340 PLC. 3D SIMULATOR is an educational software tool for teaching users how to program industrial PLCs. The simulated virtual environments are very true-to-life because of the total interactivity offered on the one hand and the realistic quality of the real-time 3D graphic animations, dynamics and sounds on the other. The simulated environment consists of a number of highly realistic systems which can be connected to an M340 PLC. Simulation avoids any risk of injury to learners or damage to equipment.


• Contents: One USB 1.1/2.0 cable One pair of jumpers (red and blue) A discrete I/O programming cable HE10 A CD and dongle containing the 3D SIMULATOR software tool

USB interface simulator

Simulated virtual environments:

-

Case sorting system, the main aim of which is to transport cases from a feed conveyor towards goods lifts by sorting them by size. Batch mixing system, which simulates a paint mixing process. The aim is to mix the three primary colours (red, green and blue) to obtain the desired colour. Automatic palletiser, the aim of which is to create pallets with up to three levels of boxes "Pick & Place" robot, which places parts inside a case by means of a 3-axis manipulator Automated magazine, which moves, stores and retrieves cases on the shelves.

Mixer

Case sorting

Automatedmagazine

Palletiser "Pick & Place" robot

80


• HMISTU855 TERMINAL MODULE


HMISTU855 TERMINAL MODULE

The HMISTU855 Magelis STO and STU terminal module has a 5.7-inch colour graphic touch screen and features the technological innovations to enable machine productivity to be improved. -

Dedicated configuration software tool Multiprotocol RJ45 RS485/232 ports Mini-USB port, memory stick, USB keypad


Module comprises: • HMISTU855 - Magelis terminal • XBTZ968 - PLC connecting cable • ALB08531 - RJ45 FTP C 5 0.5 m

• Contents: One USB 1.1/2.0 cable One pair of jumpers (red and blue)

•

ZELIO COM PLC MODULE

<

ZELIO COM PLC MODULE

MD1AM0 018 Technical data • Power supply: Rated voltage: 24 VDC

The Zelio PLC module is a double-format module. It is used for sending and receiving SMS messages. It comprises: A Zelio 10 input/output module SR3B101BD An Ethernet expansion module SR3NET01BD A communication interface SR2COM01 A GSM modem (SIM card not included) SR2MOD02 A GSM antenna Module comprises: • SR3B101BD - ZELIO PLC module • SR3NET01BD - Ethernet expansion module • SR2COM01 - MODEM communication interface • SR2MOD02 - GSM communication interface

• GSM modem



81

Operational parts • TRAFFIC MANAGEMENT MODULE

MD1AMP 003 Techni echnical cal data

TRAFFIC MANAGEMENT MODULE

The operational part represents a traffic light configuration at an intersection. Designed for teaching users how to program industrial PLCs, it comprises: o o o lights o

An intersection diagram engraved on the front panel Two sets of three-colour traffic lights: red, amber and green Six black 4-mm converter sockets for controlling the two sets of A pushbutton for the "PEDESTRIAN CALL" function and two associated black 4-mm converter sockets

• Power supply: Rated voltage: 24 VDC (2.5 A or 4.2 A) o o

• Contents:

There are two power supply types available: 24 V - 2.5 A power supply MD1AM4 001 24 V - 4.2 A power supply MD1AM4 002


• AUTOMATIC BARRIER MODULE


AUTOMATIC AUTOMA TIC BARRIER MODULE

The operational part represents an automatic barrier. barrier. Designed for teaching users how to program industrial PLCs, it comprises: -

Two motorised barriers Four red LEDs indicating the out-of-limit position of the barriers Six illuminated pushbuttons for manual or automatic barrier control Two HE10 connectors for PLC I/O connections



82


• TEMPERATURE TEMPERA TURE CONTROL MODULE

MD1AMP 006

The operational part represents an oven in which the heating element is an incandescent lamp. Designed to help users find out more about control systems, it comprises: o o

Techni echnical cal data

TEMPERATURE TEMPERAT URE CONTROL MODULE

o o

A PT100 probe and a measurement transmitter A thermal chamber (oven), in which the heating element is an incandescent lamp. An AUTO/MANUAL mode switch A potentiometer for heating control in manual mode


o

Backup fan controlled by means of a potentiometer Two green converter socket for analogue control Two yellow converte converterr sockets for temperature measurement measurement at 0 - 10 V

o o





The operational part represents a motorised electric shutter. The electric shutter is controlled by two commands – "raise" and "lower". Automatic stop is available in the top position, shutter open, and bottom position, shutter closed. The control operates at 230 VAC. The module comprises: o A motorised shutter mechanical system o One LED simulating a lamp inside the home

o

• Power supply:

o

SELF-POWERED SELF-PO WERED MODULE

o o


Two green LEDs to indicate the shutter status Two black 4-mm convert converter er sockets for the "raise" command Two black 4-mm convert converter er sockets for the "lower" command Two yellow LEDs indicating that a "raise or lower" command has been issued

83

• PROCESS CONTROL MODULE

PROCESS CONTROL MODULE

The operational part can be used to:

MD1AMP 008

•


•

o o o o o o

Simulate an industrial process comprising: A conveyor belt A product presence detector A cylinder Generating products randomly, the exercise involves: Conveying these products to the cylinder Stopping the conveyor belt Operating the cylinder (down then up)

• Power supply: Rated voltage: 24 VDC The module is connected directly by HE10 connector, so it can be used directly by PLCs and does not require I/O interfacing modules.

• Contents: One pair of jumpers (red and blue) Visualisation is provided by LEDs.

• ANALOGUE SENSOR MODULE

ANALOGUE SENSOR MODULE

The operational part of the analogue sensor comprises:

MD1AMP 019

o


o

A photoelectric detector essentially comprises a light beam transmitter (light-emitting diode) and a light-sensitive receiver (photo-transistor). Detection occurs when an object enters the transmitted light beam and, in so doing, affects the intensity of the light at the receiver sufficiently to cause the output to change state. Steel fixing bracket


• Contents: Module comprises: • XU5M18AB20D - Photoelectric Photoelectric detector • XUZA118 - Steel fixing bracket


84


• 2M MOTORISED CONVEYOR MODULE

MD1AMP 024 Technical data • Power supply:

2-METRE MOTORISED CONVEYOR MODULE

The operational part is a conveyor comprising: o o o o o o

Green polyurethane belt Motovario reducer r = 30 (belt speed 6 m/min) 230/400 V 120 W motor 3 black converter sockets U1 V1 W1 3 black converter sockets U2 V2 W2 1 green/yellow converter socket for earth

The conveyor is fitted with 2 thru-beam photoelectric cells

Rated voltage: 230/400 VAC


Structure: 420 x 2010 x 280 mm – 20 kg Conveyor width: 80 mm Belt length: 2 m

• RFID MODULE

MD1AMP 016 Technical data • Power supply:

RFID MODULE

The RFID module is used for learning about RFID (radio-frequency identification) wireless transmission technology, based on a set of interactive cards. It also allows the concepts of traceability and identification used in various applications (logistics, access control, luggage tracking and sorting, etc.) to be studied and understood. . .) This RFID module is a single-format module. It comprises: o o o o

A read/write unit A Modbus/Ethernet gateway A MAGELIS colour graphic touch screen terminal An RJ45 connection for connecting a PC


Module comprises: • TCSECL1M3M3S2 - M12 Ethernet cable • XGSZ33ETH - Ositrack box • XGC4901201 - Ositrack compact station • TCSESU953FN0 - ConneXium unmanaged switch • XGHB90E340 - Ositrack ISO badge • HMISTU655 - MAGELIS graphic terminal • ALV08530 - RJ45/RJ45 straight cable • ABL7RM24025 - 24 VDC - 2.5 A power supply • XGHB90E340 - Batch of 10 Ositrack ISO badges • XZC-P1564L05 - M12 power cable • XGSZ09L2 - M12 pre-wired supply connector

• Contents: One pair of jumpers (red and blue) One batch of 10 Ositrack ISO badges RJ45 Ethernet cable


85

Auxiliary parts • 24 VDC POWER SUPPLY MODULE

MD1AM4 001

MD1AM4 001 & 002 POWER SUPPLY MODULES



Technical data

• •

24 VDC - 2.5 A power supply module MD1AM4 001 24 VDC - 4.2 A power supply module MD1AM4 002

These are single-format modules. They comprise:


o o o

• Contents:

o

One pair of jumpers (red and blue) Power cable

• MACHINE CONTROL MODULE


MACHINE CONTROL MODULE

The module can be used to control an operational part. It is a single-format module and comprises: o o o

A pre-wired startup sequence comprising: An ON pushbutton and an OFF pushbutton An emergency stop button An "ON" potential-free contact connected to two black 4-mm converter sockets -

• Power supply:

One "cycle" indicator and two black 4-mm converter sockets A "START" pushbutton and normally open contact connected to two black 4-mm converter sockets A "STOP" pushbutton and normally closed contact connected to two black 4-mm converter sockets An "AUTO/MANUAL" selector switch and its NO and NC contacts, connected to four black 4-mm converter sockets

-

Rated voltage: 24 VDC -

-

• Contents: o o


86



8 other 4-mm safety sockets 24 VDC (red converter sockets) 0 V (blue converter sockets)

DISCOVERY BATCHES The RFID BATCH, reference MD1AML RFID, comprises: Designation

Reference

1

24 VDC 2.5 A power supply module

MD1AM4 001

1

+ Power cord

1

Wi-Fi router module

MD1AM2 010

1

24 V power supply module

MD1AM4 001

1

RFID operational part with touch screen terminal

MD1AMP 016

1

+ Configuration badge

XG2-ZCNF01

Quantity

10

+ Set of RFID labels

XGH-B90E340

32

+ Set of adhesive cards

1

+ RJ45/RJ45 cable - Length: 1 metre

1


MD1AM 000


MD1ADM 1IND


MD1ADM 0IND

+ CD-ROM

The M340 PLC BATCH, reference MD1AML MR, comprises: Quantity

Designation

Reference

1

M340 PLC module with 1 16 I/O card

MD1AM0 003

1

+ HE10 connecting cable

BMXFCC053

1

+ PC programming cable

BMXXCAUSBH018

1

16 discrete input module

MD1AM0 005

1

16 discrete output module

MD1AM0 006

1


MD1AM4 001

1

+ Power cord

1

XBTR 411 panel control module

MD1AM0 008

1

+ Magelis/PLC connecting cable

XBTZ938

1

+ Magelis/PC programming cable

XBTZ925

1

+ USB/RS485 converter

TSXCUSB485

1


MD1AM7 002

1


MD1AM 000


MD1ADM1 IND


MD1ADM0 IND

+ CD-ROM


87

The PREMIUM PLC BATCH, reference MD1AML PR, comprises: Designation

Reference

1

PREMIUM PLC module

MD1AM0 004

4

+ HE10 connecting cables

TSXCDP053

1

+ PC programming cable

BMXXCAUSBH018

1


MD1AM0 005

1


MD1AM0 006

1

24 VDC 2.5A power supply module

MD1AM4 001

1

+ Power cord

1


MD1AM0 008

1


XBTZ968

1


XBTZ925

1


TSXCUSB485

1


MD1AM7 002

1


MD1AM 000

Quantity


MD1ADM1 IND


MD1ADM0 IND

+ CD-ROM

The TWIDO PLC BATCH, reference MD1AML TW, comprises: Designation

Reference

1

TWIDO 24 I/16 O PLC module

MD1AM0 002

2

+ HE10 connecting cables

TSXCDP053

1

+ RJ45 mini-DIN/PC cable

TSXCRJMD25

1


MD1AM0 005

1


MD1AM0 006

1


MD1AM4 001

1

+ Power cord

1


MD1AM0 008

1


XBTZ938

1


XBTZ925

1


TSXCUSB485

1


MD1AM7 002

1


MD1AM 000

Quantity


MD1ADM1 IND


MD1ADM0 IND

+ CD-ROM

88


The ZELIO PLC BATCH, reference MD1AML ZL, comprises: Designation

Reference

1

ZELIO PLC module

MD1AM0 001

1


MD1AM4 001

1

+ Power cord

1


MD1AM7 002

1

Traffic management module

MD1AMP 003

1


MD1AM 000

Quantity


MD1ADM1 IND


MD1ADM0 IND

+ CD-ROM


89

Motor starter modular offer Educational objectives: • To learn about the variable speed drive • To study and create the various motor starter diagrams • To get to know the equipment and the differences in installation • To build power control equipment

Electrical and mechanical data • Power supply: Rated motor power: 230 V or 400 V - 0.18 kW Control circuit voltage: 24 VDC Power circuit voltage: 230 V or 400 V three-phase • Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg Double module: 244 x 300 x 70 mm – 1.4 kg

Package presentation The motor starter modular offer can be used to implement the components of a piece of power control equipment. The bench and batches are intended for studying and installing the products used for the electromechanical or electronic control of starter motors. The bench comprises educational versions of the most frequently used products. Two different educational batches are available for learning and using the main functions encountered in the implementations of electrical power control installations.

The Motor starter modular offer comprises: Designation TeSys U module 1.6 A magnetic protection module Thermal-magnetic protection module Magnetic protection module Switch module with Vario switch disconnector Fused (off-load) isolator module

Main sectors

1/1.6 A thermal relay module 9 A - 24 VDC contactor module

• Electrical engineering

Reversing contactor module Altistart soft starter module Contactor relay module Time-delay contactor relay module 25 A - 230 VAC contactor module 9/13 A thermal relay module Thermal-magnetic protection module ZIGBEE - ZBRRA module ZIGBEE - ZBRRC module 380/415 V Altistart soft starter module


90

Reversing contactor module MD1AM0 009


Altistart soft starter module MD1AM0 002

Motor starter modules • TeSys U MODULE


TeSys U MODULE

The TeSys U module is is a single-format module. It comprises: • A non-reversing motor starter fitted with: o A 12 A power base o A 0.35 to 1.4 A multifunction control unit o 3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC threephase power supply o 3 black converter sockets T1 T2 T3 for connection of the asynchronous motor o

• Power supply:

o

Rated voltage: 400 VAC or 230 VAC – T Control voltage: 24 VDC

o o

2 blue and red converter sockets + 24 V - 0 V for the power supply to the control unit 2 blue and red converter sockets A1 A2 for connecting the coil 2 red converter sockets labelled 13 - 14 for connecting the NO auxiliary contact 2 red converter sockets labelled 21 - 22 for connecting the NC auxiliary contact

Module comprises: • LUB12 - 12 A power base - screw clamps • LUCMX6BL- Multifunction control unit

• MAGNETIC PROTECTION MODULE

MD1AM1 002

The magnetic protection module is a single-format module. It comprises: • o

Technical data

1.6 A MAGNETIC PROTECTION MODULE

o o

A magnetic protection circuit-breaker, GV2L06, rating 1.6 A, fitted with: 3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC threephase power supply 3 black converter sockets T1 T2 T3 for the output connection Block of two NO + NO instantaneous auxiliary contacts labelled 53 - 54 and fault indicator auxiliary contacts labelled 97 - 98

o

• Power supply: o

Rated voltage: 400 VAC or 230 VAC – T

2 red converter sockets labelled 53 - 54 for connecting the NO instantaneous auxiliary contact 2 red converter sockets labelled 97 - 98 for connecting the NO fault indicator contact

Module comprises: • GV2L06 - 3-pole magnetic circuit breaker • GV2AD1010 - Side-mounting NO + NO contact block


91

• PROTECTION MODULE


THERMAL-MAGNETIC PROTECTION MODULE

The thermal-magnetic module is a single-format module. It comprises: • o o o

A 1.6 A magnetic protection circuit-breaker fitted with: 3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply 3 black converter sockets T1 T2 T3 for the output connection Block of two NO + NO instantaneous auxiliary contacts labelled 53 54 and fault indicator auxiliary contacts labelled 97 - 98

o

• Power supply: o Rated voltage: 400 VAC or 230 VAC – T


Module comprises: • GV2P06 - Thermal-magnetic circuit breaker • GVAD1010 - Side-mounting NO + NO contact block

• MAGNETIC PROTECTION MODULE


4 A MAGNETIC PROTECTION MODULE

The thermal-magnetic module is a single-format module. It comprises: • o o o

A 4 A magnetic protection circuit-breaker fitted with: 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-phase power supply 3 black converter sockets T1 T2 T3 for the output connection Block of two NO + NO instantaneous auxiliary contacts labelled 53 54 and fault indicator auxiliary contacts labelled 97 - 98

o

• Power supply:

o



Module comprises: • GV2L08 - 3-pole magnetic circuit breaker • GV2AD1010 - Side-mounting NO + NO contact block

92


• VARIO SWITCH MODULE


SWITCH MODULE WITH SWITCH DISCONNECTOR

The VARIO switch disconnector module is a single-format module. It comprises: • o o o o

A VN 12 switch disconnector, rating 12 A, fitted with: 3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply 3 black converter sockets T1 T2 T3 for the output connection An NO instantaneous auxiliary contact block labelled 13 - 14 2 red converter sockets labelled 13 - 14 for connecting the NO auxiliary contact

• Power supply: Module comprises: • KAF1PZ - Padlockable black handle • VN12 - Vario 12 A switch disconnector • VZN06 - NO + NC auxiliary contacts


• FUSED (OFF-LOAD) ISOLATOR MODULE


FUSED (OFF-LOAD) ISOLATOR MODULE

The fused (off-load) isolator module LS1D32 is a single-format module. It comprises: •

A fused (off-load) isolator LS1D32, rating 32, fitted with:

o

3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply 3 black converter sockets T1 T2 T3 for the output connection 3 10 x 38 mm 2 Amp fuses Block of two NC + NO instantaneous auxiliary contacts labelled 13 14 and 21 - 22

o o o

o

• Power supply:

o


2 red converter sockets labelled 13 - 14 for connecting the NO auxiliary contact 2 red converter sockets labelled 21 - 22 for connecting the NC auxiliary contact

Module comprises: • LS1D32 - 32 A fused (off-load) isolator • GVAE11 - 1 NC + 1 NO auxiliary contact block • DF2CA02 - Fuse


93

• THERMAL RELAY MODULE


1 - 1.6 A THERMAL RELAY MODULE

The thermal relay module is a single-format module. It comprises: •

A thermal overload relay LRD06, rating 1 to 1.6A, fitted with:

o

3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply

o

3 black converter sockets T1 T2 T3 for the output connection

o

• Power supply:

o


o

Two NC + NO fault indicator auxiliary contacts labelled 95 - -96 and 97 - 98 2 red converter sockets labelled 95 - 96 for connecting the NO auxiliary contact 2 red converter sockets labelled 97 - 98 for connecting the NC auxiliary contact

Module comprises: • LRD06 - Thermal overload relay • LAD7B106 - Terminal block for thermal relay

• 9 A - 24 VDC CONTACTOR MODULE

MD1AM1 008

9 A - 24 VDC CONTACTOR MODULE

The 9A/24 VDC contactor module is a single-format module. It comprises: • o o

A 3-pole contactor LC1D09BD, rating 9 A, with: 3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply 3 black converter sockets T1 T2 T3 for the output connection

Technical data o o

• Power supply:

o

2 blue and red converter sockets A1 - A2 for connecting the 24 VDC coil 2 red converter sockets labelled 95 - 96 for connecting the NO auxiliary contact 2 red converter sockets labelled 97 - 98 for connecting the NC auxiliary contact

Rated voltage: 400 VAC or 230 VAC – T Control voltage: 24 VDC

Module comprises: • LC1D09BD - 9 A 24 VDC 3-pole contactor

94


• REVERSING CONTACTOR MODULE


REVERSING CONTACTOR MODULE

The reversing contactor module is a single-format module. It comprises: • o o o

A 3-pole reversing contactor, rating 9 A, with: 6 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply 6 black converter sockets T1 T2 T3 for the output connection Mechanical interlock

o

• Power supply: o Rated voltage: 400 VAC or 230 VAC – T Control voltage: 24 VDC

o

4 blue and red converter sockets A1 - A2 for connecting the 24 VDC coil 4 red converter sockets labelled 13 - 14 for connecting the NO auxiliary contact 4 red converter sockets labelled 21 - 22 for connecting the NC auxiliary contact

Module comprises: • LC2D09BD - 9 A 24 VDC reversing contactor

• ALTISTART SOFT STARTER MODULE


240 V ALTISTART SOFT STARTER MODULE

The soft starter module is a single-format module. It comprises: •

An Altistart 01 soft starter, rating 6 A, with:

o

3 black converter sockets L1 L2 L3 for the 230 VAC three-phase power supply

o o

3 black converter sockets T1 T2 T3 for the output connection 1 red converter socket labelled LI+ for the power supply to inputs LI1 or LI2 or to both

o

• Power supply: o

Rated voltage: 230 VAC – T

2 yellow converter sockets labelled LI1 - LI2 for connecting the 2-wire or 3-wire control 2 red converter sockets labelled R1AR1C for connecting the NO auxiliary contact

Module comprises: • ATS01N206LU - 6 A soft start/soft stop unit


95

• CONTACTOR RELAY MODULE


CONTACTOR RELAY MODULE

The 3 NO/2 NC 24 VDC contactor relay module is a single-format module. It comprises: o o o

TeSys U CAD-32 – 3 NO + 2 NC – instantaneous contactor relay Operating current 10 A Control voltage 24 VDC, with interference suppression

-

Connection to 10 red converter sockets

o o

• Power supply:

o


o o o

2 blue and red converter sockets A1 - A2 for connecting the 24 VDC coil 2 red converter sockets labelled 13 - 14 for connecting the NO contact 2 red converter sockets labelled 43 - 44 for connecting the NO contact 2 red converter sockets labelled 03 - 04 for connecting the NO contact 2 red converter sockets labelled 21 - 22 for connecting the NC contact 2 red converter sockets labelled 31 - 32 for connecting the NC contact

Module comprises: • CAD32BD - 3 NO + 2 NC contactor relay

• TIME-DELAY CONTACTOR RELAY


TIME-DELAY CONTACTOR RELAY MODULE

The TIME-DELAY CONTACTOR RELAY module, with a time delay of 1 to 30 s and 4-mm adaptors, is used for delaying the action of a contactor (on or off ). It comprises: o o o o

TeSys time-delay auxiliary contact block 2 delayed-action contacts (1 NO + 1 NC), with a time delay of 1 - 30 s Front-mounted, connected to screw clamp terminals 4 red 4-mm converter sockets

• Power supply: Rated voltage: 24 VAC

Module comprises: • LADS2 - Delayed-action auxiliary contact block

96


• 25 A CONTACTOR MODULE


25 A - 230 VAC CONTACTOR MODULE

The contactor module is a single-format module. It comprises: •

A 3-pole contactor LC1D25P7, rating 25 A, with:

o

3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply

o


o

• Power supply:

o


o

2 blue and red converter sockets A1-A2 for connecting the 230 VAC coil 2 red converter sockets labelled 95 - 96 for connecting the NO auxiliary contact 2 red converter sockets labelled 97 - 98 for connecting the NC auxiliary contact

Module comprises: • LC1D25U7 - 15 A 3-pole contactor

•

9/13 A THERMAL RELAY MODULE

9/13 A THERMAL RELAY MODULE

The thermal relay module is a single-format module. It comprises:

MD1AM1 014

•

A thermal overload relay, rating 9 to 13 A, fitted with:

o

3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC threephase power supply

o


Technical data

o o

• Power supply:

o


Two NC + NO fault indicator auxiliary contacts labelled 95 - 96 and 97 - 98 2 red converter sockets labelled 95 - 96 for connecting the NO auxiliary contact 2 red converter sockets labelled 97 - 98 for connecting the NC auxiliary contact

Module comprises: • LRD16 - Thermal overload relay • LAD7B106 - Terminal block for thermal relay


97

•

THERMAL-MAGNETIC PROTECTION MODULE

PROTECTION MODULE

The thermal-magnetic module is a single-format module. It comprises:

MD1AM1 015

• o

Technical data

o o

A magnetic protection circuit-breaker fitted with: 3 black converter sockets L1 L2 L3 for the 230 V or 400 V threephase power supply 3 black converter sockets T1 T2 T3 for the output connection Block of two NO + NO instantaneous auxiliary contacts labelled 53 54 and fault indicator auxiliary contacts labelled 97 - 98

o

• Power supply: o Rated voltage: 400 VAC or 230 VAC - T


Module comprises: • GV2P03 - Thermal-magnetic circuit breaker • GVAD1010 - Side-mounting contact block

•

ZIGBEE - ZBRRA MODULE

ZIGBEE - ZBRRA MODULE

This is a single-format module. It comprises:

MD1AM1 016

•

A ZBRRA programmable receiver with 2 relay outputs

o

Technical data

o

• Power supply: o Rated voltage: 24 VAC

Module comprises: • ZBRRA - 24 V programmable receiver

• Contents: One pair of jumpers (red and blue) PC connecting cable supplied

98

4 blue and red converter sockets labelled + 24 V and 0 V for the 24 V power supply to the module 3 red converter sockets labelled 11 - 12 - 14 for connecting the NO and NC contacts of relay Q1 3 red converter sockets labelled 21 - 22 - 24 for connecting the NO and NC contact of relay Q2

This module can be used with the ZigBee control station, reference MD1AM7 003


• ZIGBEE ZBRRC MODULE

MD1AM1 017

ZIGBEE - ZBRRC MODULE

This is a single-format module. It comprises: A ZBRRC programmable receiver with 4 PN 3W outputs

o

Technical data

o

• Power supply:

o

4 blue and red converter sockets labelled + 24 V and 0 V for the 24 VDC power supply to the module 4 green converter sockets labelled Q1 to Q4 for connecting to the outputs 4 blue converter sockets labelled 0 V for common connection of the outputs


Module comprises: • ZBRRC - 24 VDC programmable receiver

• Contents: One pair of jumpers (red and blue) This module can be used with the ZigBee control station, reference MD1A7 003

• ALTISTART SOFT STARTER MODULE


380/415 V ALTISTART SOFT STARTER MODULE

The soft starter module is a single-format module. It comprises: • o o o

An Altistart 01 soft starter, rating 6 A, with: 3 black converter sockets L1 L2 L3 for the 400 VAC three-phase power supply 3 black converter sockets T1 T2 T3 for the output connection 1 red converter socket labelled LI+ for the power supply to inputs LI1 or LI2 or to both

o

• Power supply: o

Rated voltage: 400 VAC – T

2 yellow converter sockets labelled LI1 - LI2 for connecting the 2-wire or 3-wire control 2 red converter sockets labelled R1AR1C for connecting the NO auxiliary contact

Module comprises: • ATS01N206NQ - 6 A soft start/soft stop unit


99

Variable speed drive modules • ALTIVAR 312 MODULE

MD1AM5 001 Technical data • Power supply: Rated voltage: 240 VAC single-phase Motor: 230/400 V - 180 W max. Delta connection



This is a single-format module. It comprises: • A 312 variable speed drive for three-phase asynchronous motors Supply voltage: 240 VAC Maximum power: 0.18 kW Communication: Modbus and CANopen Display and knurled adjustment knob o 3 converter sockets (black, blue and green/yellow) for connecting the input line o 4 converter sockets (black and green/yellow) for connecting the asynchronous motor o 4 yellow converter sockets labelled LI1 to LI4 for connecting the 2-wire or 3-wire control and preprogrammed speeds, and 1 red converter socket labelled +24 V. o 2 green converter sockets labelled R1AR1C for connecting the NO auxiliary contact o 2 green converter sockets labelled AOC-COM for connecting the analogue output Module comprises: • ATV312H018M2 - 0.18 kW variable speed drive

• ALTIVAR 12 MODULE



This is a single-format module. It comprises: • A 12 variable speed drive for three-phase asynchronous motors Supply voltage: 240 VAC Maximum power: 0.18 kW Communication: Modbus and CANopen Display and knurled adjustment knob o 3 converter sockets (black, blue and green/yellow) for connecting the input line o 4 converter sockets (black and green/yellow) for connecting the asynchronous motor

• Power supply:

o

Rated voltage: 240 VAC single-phase Motor: 230/400 V - 180 W max. Delta connection

o o

• Contents: o One pair of jumpers (red and blue)

4 yellow converter sockets labelled LI1 to LI4 for connecting the 2-wire or 3-wire control and preprogrammed speeds, and 1 red converter socket labelled +24 V. 2 green converter sockets labelled R1A-R1C for connecting the NO auxiliary contact 2 green converter sockets labelled AOCCOM for connecting the analogue output 3 converter sockets (red, yellow and blue) for connecting the analogue input

Module comprises: • ATV12H018M2 - 0.18 kW variable speed drive

100


Operational parts • ASYNCHRONOUS MOTOR MODULE

MD1AMP 001

230/400 V ASYNCHRONOUS MOTOR MODULE

The operational part consists of a base-mounted 180 W - 230/400 V - 1300 rpm asynchronous motor

Technical data Weight: 7 kg Height: 250 mm Length: 390 mm Width: 205 mm

• Power supply: Rated voltage: 230/400 VAC Power: 180 W o

o

• 1M MOTORISED CONVEYOR MODULE


3 black converter sockets labelled U1V1-W1 and 3 black converter sockets labelled U2-V2-W2 for the motor windings 1 green/yellow converter socket for earth

1-METRE MOTORISED CONVEYOR MODULE

The operational part is a conveyor comprising: o o o o o o

Green polyurethane belt Motovario reducer r = 30 (belt speed 6 m/min) 230/400 V 120 W motor 3 black converter sockets U1 V1 W1 3 black converter sockets U2 V2 W2 1 green/yellow converter socket for earth

The conveyor is fitted with a photoelectric cell.

• Power supply: Rated voltage: 230/400 VAC


Structure: 420 x 1005 x 280 mm – 10 kg Conveyor width: 80 mm Belt length: 1 m


101

• ASYNCHRONOUS MOTOR MODULE

MD1AMP 013

400/690 VAC ASYNCHRONOUS MOTOR MODULE

The operational part consists of a base-mounted 180 W - 400/690 V - 1300 rpm asynchronous motor

Technical data • Power supply: Rated voltage: 400 V/690 VAC Power: 180 W

o o

• MOTORISED FAN MODULE

3 black converter sockets labelled U1-V1-W1 and 3 black converter sockets labelled U2-V2-W2 for the motor windings 1 green/yellow converter socket for earth

230/400 V - 180 W MOTORISED FAN MODULE WITH COLUMN AND BALL


The operational part is a motorised centrifugal fan. A diaphragm and a transparent column are attached to the fan output. In the transparent column a foam ball shows the flow of expelled air. The diaphragm can be used to vary the flow so that the ball is positioned between the two markers at the top of the column.

• Power supply: Rated voltage: 230/400 VAC Power: 180 W

o

o

102

3 black converter sockets labelled U1V1-W1 and 3 black converter sockets labelled U2-V2-W2 for the motor windings 1 green/yellow converter socket for earth


Auxiliary parts •

VARIABLE SPEED DRIVE CONTROL MODULE

VARIABLE SPEED DRIVE CONTROL

This module is used for controlling a variable speed drive. It comprises:

MD1AM7 001

o o o

Technical data

4 red and blue converter sockets for the 24 VDC power supply to the module One green 24 VDC LED with 2 black converter sockets 4 manual selector switches labelled LI1 to LI4 are used for controlling the variable speed drive and for selecting preprogrammed speeds. They have 4 yellow converter sockets and 1 red converter socket.

• Power supply: o


o

1 x 2.2  potentiometer with 3 black converter sockets for analogue control of the variable speed drive 1 x 0-10 V digital display with 2 red and blueconvertersocketsfordisplayingthe variable speed drive's analogue output


• MACHINE CONTROL MODULE


MACHINE CONTROL MODULE

The module is used for controlling a motor starter. It is a single-format module and comprises: o o o -

A pre-wired startup sequence comprising: An ON pushbutton and an OFF pushbutton An emergency stop button An "ON" potential-free contact connected to two black 4-mm converter sockets One "cycle" indicator and two black 4-mm converter sockets

• Power supply: Rated voltage: 24 VDC -

-



A "START" pushbutton and normally open contact connected to two black 4-mm converter sockets A "STOP" pushbutton and normally closed contact connected to two black 4-mm converter sockets An "AUTO/MANUAL" selector switch and its NO and NC contacts, connected to four black 4-mm converter sockets

103

• 24 VDC POWER SUPPLY MODULE

MD1AM4 001

MD1AM4 001 & 002 POWER SUPPLY MODULE



Technical data

•

24 VDC 2.5 A power supply module MD1AM4 001

•

24 VDC 4.2 A power supply module MD1AM4 002

• Power supply:

These are single-format modules. They comprise:


o o o

• Contents: o One pair of jumpers (red and blue) Power cable

•




The protection module is a single-format module. It comprises:

MD1AM2 001

o

Technical data

o o o

A 10 A 30 mA earth leakage circuit breakerfitted with an undervoltage trip coil A power socket for connecting the power cord supplied A white "power on" LED indicates the module status An emergency stop button cuts off the power supply instantaneously


o

• Contents: Power cable

104


Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules.

DISCOVERY BATCHES The MOTOR STARTER BATCH, reference MD1AML DM, comprises: Quantity

Designation

Reference

1

TeSys U U starter module

MD1AM1 001

1

Magnetic circuit breaker module

MD1AM1 002

1

Thermal-magnetic circuit breaker module

MD1AM1 003

1

Switch disconnector module

MD1AM1 005

1

Fused (off-load) isolator module

MD1AM1 006

1

Thermal relay module

MD1AM1 007

3

Contactor modules

MD1AM1 008

1

Reversing contactor module

MD1AM1 009

1

Time-delay relay module

MD1AM1 012

1

Altistart soft starter module

MD1AM1 018

1

Motor starter control module

MD1AM7 004

1

24 VDC 2.5A power supply module

MD1AM4 001

1

+ Power cord

1


MD1AM 000


MD1ADM1 IND


MD1ADM2 INDVV

+ CD-ROM


105

The ENERGY EFFICIENCY VENTILATION BATCH, reference MD1AML ATVEE, comprises: Quantity

Designation

Reference

1

Magnetic protection module

MD1AM1 004

1

Thermal relay module

MD1AM1 007

1

Contactor module

MD1AM1 008

1

Power meter module PM9

MD1AM2 003

1

3 CT module

MD1AM2 004

1

EGX300 gateway module

MD1AM2 005

1


TSXCYSB485

1

+ RJ45/RJ45 cable - Length 1 metre

1

+ USB/RJ45 cable - Length 2.5 metres

1


MD1AM4 001

1

Altivar 312 variable speed drive module

MD1AM5 001

1


MD1AM7 001

1

Illuminated selector switch module

MD1AM7 004

1

230/400 V fan unit module with column and ball

MD1AMP 014

1


MD1AM 000


+ CD-ROM

106


VDIP184546010 TCSMCNAM3M002P

MD1AD ATVEE

The ALTIVAR 312 BATCH, reference MD1AML ATV312, comprises: Designation

Reference

1

Altivar 312 module - 0.18 kW

MD1AM5 001

1

Thermal-magnetic protection module

MD1AM1 004

1


MD1AM7 001

1

230/400 V - 0.18 kW asynchronous motor module

MD1AMP 001

1


MD1AM 000

Quantity


MD1ADM1 IND


MD1ADM2 INDVV

+ CD-ROM

The ALTIVAR 12 BATCH, reference MD1AML ATV12, comprises: Designation

Reference

1

Altivar 12 module - 0.18 kW

MD1AM5 001

1


MD1AM1 004

1


MD1AM7 001

1

230/400 V - 0.18 kW asynchronous motor module

MD1AMP 001

1


MD1AM 000

Quantity


MD1ADM1 IND


MD1ADM2 INDVV

+ CD-ROM


107

Machine safety modular offer Educational objectives: • To find out about the devices to be implemented for making an industrial machine safe • To determine the risk levels • To understand the legislation in force

Electrical and mechanical data • Power supply: Rated motor power: 230 V single-phase + T • Dimensions (H x L x D) – weight: Structure: 1030 x 910 x 400 mm – 6.5 kg Single module: 244 x 150 x 70 mm – 0.7 kg Operational part: 640 x 1000 x 410 mm – 29 kg

Main sectors • Industrial engineering and maintenance • Electrical engineering

Package presentation The package can be used to carry out a risk analysis and to implement solutions that meet the current standards: • EN/ISO 12100: General design principles • EN 954-1: Solution category • EN ISO 13849-1: Maximum performance level of the solution • EN IEC 62061: Maximum safety integrity level of the solution (SIL). This last standard (Safety Integrity Level SIL) takes account of the use of new technologies in products and safety solutions and suggests guidelines for calculating the probability of a breakdown. The safety integrity level (SIL) is the new evaluation, defined by standard IEC 61508, concerning the probability of failure of a function or safety system. The machine safety modular offer implements certain safety components. These modules ensure maximum protection for all safety functions present in an automated system chain. The safety functions covered are: • Monitoring the emergency stop and safety limit switches • Coded magnetic switch monitoring • Zero speed control in conjunction with a key-operated safety limit switch

The Machine safety modular offer comprises: Designation Safety module for emergency stop monitoring Safety module for emergency stop + limit switch monitoring Safety module for coded magnetic switch monitoring Safety module for time delay monitoring Safety module for zero speed monitoring Safety module for time delay monitoring

Emergency stop module Supporting structure

108


Safety limit switch monitoring module

Machine safety modules • EMERGENCY STOP MODULE


EMERGENCY STOP MODULE – XPS AC5121 – EN9541/ISO 13849-1 CATEGORY 4

Safety module XPS AC5121 is used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1 and it also meets the safety requirements for the electrical monitoring of switches in protection devices conforming to standard EN 1088/ISO 14119. It provides protection for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of a fault in the safety circuit itself.

• Power supply: To aid diagnostics, the module has LEDs which provide information on the monitoring circuit status. The XPS AC module has 3 safety outputs and a solid-state output for signalling to the PLC.



Module comprises: • XPSAC5121 - Emergency stop monitoring safety device

• EMERGENCY STOP + LIMIT SWITCH


EMERGENCY STOP AND LIMIT SWITCH MODULE – XPSAF5130 – EN954-1 ISO 13849-1 CATEGORY 4

The safety module XPS AF5130 is designed in accordance with EN 954-1 category 4. It is used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. For electrical monitoring of switches activated by protection devices conforming to standard EN 1088.

• Power supply:

To aid diagnostics, the module has 3 LEDs on the front panel which provide information on the monitoring circuit status. The Start button monitoring function is configurable depending on the wiring.


• Contents: Module comprises: • XPSAF5130 - Emergency stop and limit switch monitoring safety device



109

• MAGNETIC SWITCH MODULE


CODED MAGNETIC SWITCH MODULE – XPS DMB1132 – EN954-1/ISO 13849-1 CATEGORY 4

The safety module XPS DMB1132 is designed for monitoring coded magnetic safety switches. It features two safety outputs and two solid-state outputs for signalling to the process PLC. In compliance with EN 954-1/ISO 13849-1 category 4, the XPS DMB1132 module can monitor two independent sensors. To monitor a larger number of sensors using this safety module, the sensors can be connected in parallel series, in compliance with the requirements of EN 954-1/ISO 13849-1 category 3.


To aid diagnostics, the modules have LEDs on the front panel which provide information on the monitoring circuit status.


Module comprises: • XPSDMB1132 - Switch monitoring safety device

• TIME DELAY MODULE


TIME DELAY MODULE – XPS TSA5142P – EN954-1/ISO 13849-1 CATEGORY 3

The XPS TSA5142P safety module is used in applications requiring a safety time delay with interlock on inertia machines (guards are unlocked at the end of the safety time delay). The time delay of safety circuits can be set to 16 preset values, using 2 selectors located on the front panel of the module.

• Power supply: To aid diagnostics, the module has LEDs which provide information on the monitoring circuit status and 2 solid-state outputs for signalling to the process PLC.



110

Module comprises: • XPSTSA5142P - Time delay monitoring


• ZERO SPEED MODULE


ZERO SPEED MODULE – XPS VNE1142P – EN954-1/ ISO 13849-1 CATEGORY 3

The Preventa safety module XPSVNE11342P for zero speed detection is used to detect the stop condition of electric motors. Their most common applications include: providing the unlock signal for electrically interlocked movable machine guards, controlling rotation direction signals for reversing motors and engaging locking brakes after a motor has come to a standstill. When electric motors slow down, a remanent voltage is produced in the windings of the motor due to residual magnetism. This voltage is proportional to the speed of the motor and therefore decreases as the motor slows. This remanent voltage is measured in a redundant manner so as to detect the stop condition of the motor. The cabling between the motor windings and the inputs of the XPS VNE module is also monitored to prevent a stoppage being simulated in the event of a broken cable. A transformer should not be used to connect the motor to terminals Z1, Z2 and Z3 since there is no monitoring of the connection with the motor winding via the resistance monitoring.



Module comprises: • XPSVNE1142P - Zero speed monitoring

• TIME DELAY MODULE

MD1AM9 006

TIME DELAY MODULE – XPS TSW5142P – EN954-1/ISO 13849-1 CATEGORY 3

The XPS TSW5142P safety module is used in applications requiring a safety time delay with a safety switchover contact (shunting contact in association with XPS VN modules for zero speed monitoring, solenoid valve monitoring).

Technical data The time delay of safety circuits can be set to 16 preset values, using 2 selectors located on the front panel of the modules. To aid diagnostics, the modules have LEDs which provide information on the monitoring circuit status and 2 solid-state outputs for signalling to the process PLC.


• Contents: Module comprises: • XPSTSW5142P - Time delay monitoring



111

Operational part • MACHINE SAFETY BENCH MODULE


MACHINE SAFETY BENCH MODULE

The operational part simulates a machine movement protected by a grid and a fan which also has a grid. o In the top left, a movable protective casing together with two limit switches labelled S01 and S02. Next to each limit switch, the 6 corresponding safety sockets for connection purposes. Behind the protective casing is an asynchronous motor with reducer and exposed disc. This device can be used to simulate a machine in operation. Underneath are the 6 corresponding safety sockets U1 - V1 - W1 and U2 - V2 W2 together with a male green/yellow earth socket for connection purposes.



Structure: 640 x 1000 x 410 mm – 29 kg

o In the top right, a movable protective casing together with a limit switch labelled S03 and a safety limit switch with interlock and solenoid lock labelled S1/Y1. Next to the limit switch S03, the 6 corresponding safety sockets for connection purposes. Below the safety limit switch with electrical interlock, safety sockets labelled S1 for the corresponding contacts and Y1 for the corresponding solenoid. Behind the protective casing is a 230 VAC fan, which can be used to simulate a high-inertia machine. In the centre is a mushroom head emergency stop button and the corresponding 4 safety sockets.

Module comprises: • XCSM3902L1 - Limit switch with roller plunger • XCSDMP5902 - Magnetic switch • XCSE5312 - Safety limit switch with electric lock • XCSZ01 - Straight actuator key • XB4BA51 - Yellow pushbutton with 1 NO contact

112

• • • • •


XB4BVB5 - Complete indicator with yellow LED ZB4BW7A1721 - Pushbutton head ZB4BW0B35 - Complete body with green LED ZB4BS54 - Emergency stop button ZB4BZ104 - Complete body with 2 NC contacts

Auxiliary parts • 24 VDC 2.5 A POWER SUPPLY MODULE

MD1AM4 001

24 VDC 2.5 A POWER SUPPLY MODULE


Technical data These are single-format modules. They comprise:

• Power supply:

o



o o o

• Contents: One pair of jumpers (red and blue) Power cable

• THERMAL-MAGNETIC MODULE


THERMAL-MAGNETIC MODULE GV2P06

The thermal-magnetic module is a single-format module. It comprises: •

A magnetic protection circuit-breaker, GV2P07, rating 1.6 A, fitted with:

o

3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC threephase power supply 3 black converter sockets T1 T2 T3 for the output connection Block of two NO + NO instantaneous auxiliary contacts labelled 53

o o

- 54 and fault indicator auxiliary contacts labelled 97 - 98

• Power supply: o Rated voltage: 230 V - 400 VAC three-phase o



113

• CONTACTOR MODULE


CONTACTOR MODULE

The 9 A/24 VDC LC1D09BD contactor module is a single-format module. It comprises: •

A 3-pole contactor LC1D09BD, rating 9 A, with:

o

3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC threephase power supply 3 black converter sockets T1 T2 T3 for the output connection

o

• Power supply:

o


o o

114


2 blue and red converter sockets A1 - A2 for connecting the 24 VDC coil. 2 red converter sockets labelled 13 - 14 for connecting the NO auxiliary contact 2 red converter sockets labelled 21 - 22 for connecting the NC auxiliary contact

DISCOVERY BATCH The MACHINE SAFETY BATCH, reference MD1AML SECU, comprises: Designation

Reference

1

Safety module for emergency stop monitoring

MD1AM9 001

1

Safety module for emergency stop + limit switch monitoring

MD1AM9 002

1

Safety module for coded magnetic switch monitoring

MD1AM9 003

1


MD1AM9 004

1

Safety module for zero speed monitoring

MD1AM9 005

1


MD1AM9 006

1

24 VDC power supply module

MD1AM4 001

1


MD1AM1 015

3

Contactor modules

MD1AM1 008

1


MD1AM 000

Quantity

Machine safety documentation

FRAED209950FR


MD1ADM9 SM1


MD1ADM9 SM2

+ CD-ROM


115

Accessories and additional

modules

Accessories and additional modules Operational part modules .................................................................................... 118 MD1AMP 021 .........................................................................................................................................................................118 MD1AMP 022 ........................................................ ........................................... ........................................... ..........................118

Control/command modules ................................................................................ 119 MD1AM7 003 .........................................................................................................................................................................119 MD1AM7 004 .........................................................................................................................................................................119

Safety leads batch ..................................................................................................120 Training courses ..................................................................................................................................................................121 Website ..................................... ........................................... ............................................. ........................................... ......... 122

Products comply with the provisions of European Directives Compliance report available on request All of our discovery batches are supplied with: •

Printed copy of the technical data sheet and specification

•

A CD containing PDF versions of these documents and the PLC applications


117

• DALI MODULE


LAMP + DALI BALLAST MODULE

The operational part comprises a lamp and a DALI BALLAST. DALI (Digital Addressable Lighting Interface) is a non-proprietary standard interface for electronic dimming ballasts offering improved functionality and ease of use. Up to 64 DALI electronic ballasts can be controlled with a high degree of flexibility by means of a control line with two connectors, either individually or in up to 16 groups without addresses.

• Power supply: DALI offers almost limitless possibilities. Lighting control, cubicles, operating devices, electronic ballasts and lamps, all are covered by this standard professional interface. Unrestricted two-way communication allows top-quality management of light. DALI – a common interface for all components.



• LAMP + DIMMER SWITCH MODULE

MD1AMP 022

LAMP + 1 - 10 V BALLAST DIMMER MODULE

The operational part comprises a lamp and a 1 - 10 V ballast dimmer and consists of a 15 W incandescent lamp. It is designed to be used as a load on KNX modules, for example. Dimmers are static converters which convert a FIXED alternating current into a VARIABLE current.

Technical data • Power supply: Rated voltage: 230 VAC

Startup and dimming are controlled from the command line. There is no need to install relays. Important information such as lamp status is stored in the ballast and available to the controller.


118


• ZIGBEE CONTROL STATION MODULE

MD1AM7 003

ZIGBEE CONTROL STATION MODULE

The ZIGBEE CONTROL STATION module uses the ZigBee compatible wireless and batteryless protocol. It is the most widely used protocol in the industry. ZigBee is the international wireless language connecting highly disparate devices to enable them to work together and improve people's day-to-day life.

Technical data Module comprises: • ZBRT1 - Transmitter for wireless button • ZB5RZA0 - Spring-return pushbutton head • ZB5AZ009 - Mounting base for XB5 body • ZBA79 - Set of 10 coloured caps with markings • XALD04 - Complete control station with 4 XB5 units

• Power supply: SELF-POWERED MODULE

• MOTOR STARTER CONTROL MODULE


MOTOR STARTER CONTROL MODULE

The module can be used to control an operational part. It is a single-format module and comprises: - A pre-wired startup sequence comprising: o An emergency stop button o An "ON" potential-free contact connected to two black 4-mm converter sockets o 0 V (blue converter sockets) - Two LEDs and four black 4-mm converter sockets - A "STOP" pushbutton and normally closed contact connected to two black 4-mm converter sockets - 8 other 4-mm safety sockets o 24 VDC (red converter sockets) o 0 V (blue converter sockets)


• Contents:

Module comprises: • XB6AW3B1B - Green pushbutton 1 NO 24 VDC • XB6AA42B - Red pushbutton 1 NC 24 VDC • ZB6AS834 - Emergency stop pushbutton • ZB6Z2B - Complete body with NC contact



119

SAFETY LEAD BATCH The SAFETY LEAD BATCH, reference MD1AA CORDONS, comprises:

Designation 6 x 4-mm safety leads, black 6 x 4-mm safety leads, red 6 x 4-mm safety leads, blue 6 x 4-mm safety leads, black 6 x 4-mm safety leads, red 6 x 4-mm safety leads, blue 3 x 4-mm safety leads, black 2 x 4-mm safety leads, red 3 x 4-mm safety leads, blue 3 x 4-mm safety leads, black 2 x 4-mm safety leads, red 3 x 4-mm safety leads, blue 2 x 4-mm safety leads, yellow 1 x 4-mm safety lead, black 1 x 4-mm safety lead, blue

Length L = 0,25 m L = 0,25 m L = 0,25 m L = 0,50 m L = 0,50 m L = 0,50 m L = 0,75 m L = 0,75 m L = 0,75 m L=1m L=1m L=1m L=1m L=2m L=2m

Highly flexible, silicone or PVC-insulated measuring leads, fitted at each end with a 4-mm piggyback blade connector protected by a rigid insulating sleeve.

Technical data sheet:

120


Training courses With a team of trainers from the world of industry and the very latest training resources, Energy training offers support to help you give your trainees the best possible training experience.

SEF Energy training : • Guaranteed results o Face-to-face and distance training • The reassurance of a high-quality service o Certified to ISO 9001 V 2000 o Complies with the quality charter of FIEEC training centres o Approved by the Comité des Travaux Sous Tension (body regulating live electrical work)

Schneider Electric runs training courses and workshops for trainers in connection with academic training programmes. For public-sector trainers, the registration details can be found on the CERPET website: www.cerpet.education.fr For private-sector trainers, the registration details can be found on the CTPN website: www.ctpn.asso.fr/stages_Ist.php3, from the beginning of January of each year. Examples of courses run in 2013 : • Unity: Unity basics and programming, 4 days • KNXC: KNX home automation: KNX certification, 5 days • OLPV: Photovoltaics: Basics of home installation (distance training, 30 min) • ONDPV: Photovoltaic inverter: Choosing the right inverter, 2 days • ERENO: Renewable energies: Introduction to renewable energies, 1 day • BBC12: Building tightness: Impact of RT2012 and low-energy buildings on electricians, 1 day • SOMAC: Automation systems: Designing and implementing a machine with SoMachine, 3 days • SOATV: SoMachine: Designing and implementing a machine with a variable speed drive, 2 days • RLI: Networks and fieldbuses, 4 days

A variety of workshops are available in connection with academic training programmes: • Assessments o Before training: Free online prerequisite tests for self-testing and to help select the right course o After training: Evaluation of knowledge gained during the course

• Available in France and throughout the world

• JTECO: Energy efficiency: Saving energy in electrical networks • JBECO: Energy efficiency: Sustainable building solutions • JTDET: Detection: The various methods of detection • JTDM: Motor starters: Controlling and protecting electric motors • JTVV: Speed control: Understanding the principles and products • RT012: Temperature control • JTCER: Reactive power: Compensation in environments subject to interference • JTFDR: Lightning: Protecting your electrical installation • BTCOM: Networked switchboard

Access at preferential rates to all courses in the Schneider Electric Training catalog

Visit our website: www.schneider-electric.com/energy-training/fr

La formation parlespécialistemondial delagestiondel'énergie > Catalogue 2014

Training Catalog 2014


121

Website Find out more about the full Schneider Electric offering on the website:

www.schneider-electric.com

Under Energy training (Educational equipment) you will find: • Details of educational solutions: o Technical skills o Practical exercises • Information about Schneider Electric businesses • Contact details

Energy University Training modules offer a way of acquiring the necessary skills to measure, analyse, control and reduce consumption. By implementing the solutions proposed by Energy University you can save up to 30% on your energy bill. Given that energy costs are set to rise substantially over the coming years, particularly due to growing demand in emerging countries, that is a significant saving.

Visit the Energy University website:

www.myenergyuniversity.com

122


Notes


123

Modular Offers Catalog 2014

Recommend Documents