This document helps in creating IDOC's.Description complète
Description complète
Panduan Software MIKEFull description
Step-by-step photographic guide with inspirational projects to make succesfull woodworking.Descripción completa
CMG step by step guideDeskripsi lengkap
This document helps in creating IDOC's.
Step by step learningDescription complète
C# Step by Step
Step by step learning
Procast Step By Step GuideFull description
cozinha
This book was written for ESL students whose written work looks like this:"It was busy day at store. She was a talk on the phone. She not want buy candy for child." In this book, students pr…Descripción completa
SIMULATION STEPS - Create 3D models - Mesh - Precast - Run - Viewcast 1. Create 3D models Optionally, you can use : PRO, UNX, CATIA... To perform simulation requires three main components + Fixed mold + castings + mobile mold
2.Mesh. Perform detailed mesh in turn drew. The mesh is the most difficult stages of procast When meshing need to pay attention to your product For example: Your casting edges, or into such 1mm thick. the grid can not be> 1 mm. Because the mesh will fail. But smaller mesh than the machine running slowly. So the grid mesh size depends on how much detail and the ability of your computer.
Mesh lower die
Mesh upper die.
Mesh casting.
Assemble the component on together and conduct mesh volume
After the volume mesh
-------------
2.Precast. Attached material for molding, casting
---------------------
Determining heat transfer mold casting (interface)
------------------------
Determination of boundary conditions, such as temperature, velocity on heat transfer metal mold environment, temperature cooling system .....
-----------------------------------
Set the gravitational acceleration
------------------
Set initial conditions: initial temperature of the mold, casting .... .. ..
---------------
Set to run the simulation conditions: flow, cycles, stress, or micro-structure
After you finish setting the parameters save it and run
