Telekomunikasi dan jaringan sinyal mobile phone and internet
Indoor Radio Planning Practical GuideFull description
Full description
LTE Radio Design for Communication Engineers
FOR YOU BRO
its a material requirement per cu.m.Full description
it can be used for the calculation of labour required as per the quantity of work the calculation is as per the specifications of Book: Estimating & Costing by B.N. Dutta
its a requirement of labour per item per cu.m.
Install Radio Radio 2217, Radio 2218 and Radio 0208 Installation Instructions
complete radio installation manual for after market radios
Presentation about new Anchors for Deepwater Mooring Planning & Installation
Revised by Mohammad Golam Mustafa Bhuyan S.M.Mashihure Romman S.M.Mashihure Romman S.M.Mashihure Romman
S.M. Mashihure Romman
Date June 10/2007
Revision Description Initial version
August 17/2011
Modified Version
10/30/2011
Edited and More Information Added.
3/01/2012
Edited and More Information Added.
Page 1
22/11/2013
RP/RP-CORE001-07
Contents ……………………………………………..………………………………...2 1 Scope.............................................................................................................................2 2 Audience.......................................................................................................................3 3 Objective – Foster the Process of Accumulation in the System...................................3 4 Different software used in Radio Planning department................................................3 4. 1) Installing Fallos .....................................................................................................3 4.2) Installing Planet V5.3...............................................................................................4 4.3) Installing Google Earth ............................................................................................9 4.5) Installing RDT .........................................................................................................9 4.6) Installing ROC (Roll Out Controller)...................................................................10 4.7) Installing TEMS.....................................................................................................11 4.8) Installing ALEX (Active Library Explorer) ..........................................................12 4.9) Installing Printer.....................................................................................................14 5) Reading Materials:.....................................................................................................19 6) M2000 and PRS Installation files and installation procedure...................................19
1
Scope
The present document describes the installing procedure of different software used in RP for designing, planning and for interacting with different interfaces. S.M. Mashihure Romman
Page 2
22/11/2013
RP/RP-CORE001-07
2
Audience
Target group of this documents are entire RP, emphasizing the newly recruited System Engineers. This document will ease the preparation stage to cope pace with the on going work and contribute to the department as quickly as possible.
3
Objective – Foster the Process of Accumulation in the System
What to do, and how to do are the basic questions, that remain unclear and unanswered to the newly recruits. Installing the software needed in day to day activities and being acquainted with then in faster pace will help the new recruit contribute to the departmental work ever faster.
4
Different software used in Radio Planning department
These are the main Software Used in Radio Planning: 1. Fallos 3.0 (SQL Version) 2. Planet EV 4.2 3. Google Earth 4. RPET (Radio Planning Expansion Tool) 5. RDT (Radio Dimensioning Tool) 6. ROC (Roll Out Controller) 7. TEMS (For Drive Test Group)
4. 1) Installing Fallos I. II. III. IV. V.
Run \\GP-PC-13000465\Tools_Software\Fallos_Setup\setup.exe In the installation time, some file need to click in yes when setup is ongoing. When installation finished the go to \\GP-PC13000465\Tools_Software\MapXsetup\setup.exe When finished then copy “kart and map” folder from \\GP-PC13000465\Tools_Software\MapXsetup\ to your local machine “C:\Program Files\MapXsetup” in that location. After complete this step go to \\GP-PC-13000465\Tools_Software\Fallos DataBase link File\ Copy the “MSRDO20.DLL” file and paste to following location “C:\WINDOWS\system32” and double click on the dll file and open with then select from the programs then click on the browse
S.M. Mashihure Romman
Page 3
22/11/2013
RP/RP-CORE001-07 the go to following location ‘C:\WINDOWS\system32’ from the browse window.
VI.
Then click on the regsvr32.exe. to register the dll file into your machine.
4.2) Installing Planet V5.3 1. Please Ensure your local machine has Admin Privilege. 2. Please go to \\GP-PC-13000465\Tools_Software\Mentum Planet\Mentum Planet 5.3\ 3. Then Check first from your local machine – start>> control panel>> Add or remove programs>> has installed already dotNet Framework 3.5 Sp1, If not then select from the location “dotnetfx35.exe “and install it in your local machine. 4. After install .NET 3.5 SP1, reboot the machine. 5. Then click on “Mentum_Planet_Setup.exe” to install :
S.M. Mashihure Romman
Page 4
22/11/2013
RP/RP-CORE001-07
6. Click on Browse and locate your installation folder in the local Machine. Then click on the Install Button. Input PID: 68621-2791684293 during setup. 7. After Finished the installation procedure then go to folder “planetv531_patch3” from the shared location and run the patch “Mentum Planet 5.3.1 Patch.exe”. 8. Once Planet installation completed, put “Settings.xml” files under C:\Documents and Settings\All Users\Application Data\Mentum\Planet 5 If you can’t find hidden path Application Data, you need to open Windows Explorer -> Tools -> Folder Options -> View Tab -> Advanced settings: Hidden files and folders -> select radio button to Show hidden files and folders. Then, Apply and OK.
S.M. Mashihure Romman
Page 5
22/11/2013
RP/RP-CORE001-07
Copy “Settings.xml” from the share location in the above location (under C:\Documents and Settings\All Users\Application Data\Mentum\Planet 5). 9. After finished this step, 'regedit' from RUN
10.Find for registry key " isregistered". Set all of their values as TURE (for four time)
S.M. Mashihure Romman
Page 6
22/11/2013
RP/RP-CORE001-07
11. In the Last “isregistered” make it true and click on edition change the value from 3 to 1.
S.M. Mashihure Romman
Page 7
22/11/2013
RP/RP-CORE001-07
12.Then create an environment variable named lsforcehost with value 172.25.15.10, if you have already previous version in your local machine (V 4.5) then ignore this step.
For creating EV, right click to “My Computer” - Advanced Environment Variables System Variables New
Variable Name: lsforcehost Variable value: 172.25.15.10 13.Start mP5.3.1 again. Edit -> Setting -> Data manager to setup his/her own connection Profile – same as 4.5.1 to set your own profile to logon DM. and click to \\planetev1\DataManagerFiles \
S.M. Mashihure Romman
Page 8
22/11/2013
RP/RP-CORE001-07
14.Connect Data Manager 5.3.1 – Data -> Data Manager and do a fresh get the 5.3.1 Data manager projects and save it to your own local project.
4.3) Installing Google Earth With Google Earth , Engineers can get site location information in terms of surrounding regions and important sites. 1. Install Google Earth Run GoogleEarthWin.exe from the Installation Source Path Folder. Installation Source Path: \\GP-PC-13000465\Tools_Software\Google Stuff\Google Earth\ 2. Load GP Sites’ Coordinates file from \\GP-PC-13000465\Tools_Software\Google Stuff\Google Earth\GP Site Loader\Google_Earth_Site_Loader.kml 3. Read Help Files for Google Earth Help Documentation path: http://earth.google.com/userguide/v4/index.html 4. Master Key Board Shortcuts Key Board Shortcuts http://earth.google.com/userguide/v4/ug_keyboard.html
4.5) Installing RDT 1. Install RDT Run \\GP-PC-13000465\Tools_Software\RDT Setup\setup.exe Ignore Any Interruption while installation time, If it says, particular DLL file is busy or any system valid is more recent than the software is trying to replace. Then copy \\GP-PC-13000465\RDT_Update\ rdt.exe and paste into your local machine C:\Program Files\Radio Dimension Tool\.
S.M. Mashihure Romman
Page 9
22/11/2013
RP/RP-CORE001-07
4.6) Installing ROC (Roll Out Controller) 1. Call ROC HELPLINE 01714-412803 to get access to \\bstation. When you have got access to \\bstation then you will be able to map drive.
2. Run \\bstation\ROC\ROC_NEW
3. Select Map Network Drive 4. Select any unmapped drive such as M:/N:/ etc and write \\bstation\ROC\ROC_NEW in the Folder field.
5. Upon executing the above window, it will open a new explorer with M:\ in the Address field as bellow.
S.M. Mashihure Romman
Page 10
22/11/2013
RP/RP-CORE001-07
Now run setup.exe from M:\. Rest of the part of ROC Installation is simply Clicking the Next button.
4.7) Installing TEMS 1. Install TEMS From \\GP-PC-13000465\Drivetest_Tools_Software\TEMS 7.1.1\TEMS_Investigation_7.1.1.exe 2. Chose GSM Only. 2. Read documents from \\GP-PC-13000465\Drivetest_Tools_Software\TEMS 7.1.1\Documents 3. Ericsson’s TEMS after sell service URL http://www.ericsson.com/solutions/tems/ Expert TEMS users are prescribed to visit the above site on a frequent basis. 4. \\gp-pc-13000465\Tools_Software\TEMS 9.1\TEMS Investigation 9.1.1 Full Install\ TEMS_Investigation_9.1.1.exe 5. \\gp-pc-13000465\Tools_Software\TEMS 9.1\TEMS Investigation 9.1.4 patch\
S.M. Mashihure Romman
Page 11
22/11/2013
RP/RP-CORE001-07
4.8) Installing ALEX (Active Library Explorer) 1. Copy whole directory ALEX from \\GP-PC-13000465\Tools_Software\ folder and paste it to your local drive. 2. Click C:\ALEX\Alex_All\alexwin\Install.exe provided that you have pasted ALEX folder in C drive. 3. Complete the setup. 4. Click C:\Program Files\ALEX\alex.exe to Run ALEX for the first time. 5. You will see an icon in the Status bar. Double click it to open this window. Use the following Settings in different tabs of ALEX. Browser Tab Settings:
Use C:\Documents and Settings\YOUR_GP_ID_REPLACE_ME\Local Settings\Temp\ as tempory file area root setting. You are done. What NExt? 1. Read and read ALEX. It’s huge, it’s full.
4.9) Installing Printer 1. Run \\padma\gp-pr-013 and You are done. Or 2. Follow the Graphical Instruction
S.M. Mashihure Romman
Page 14
22/11/2013
RP/RP-CORE001-07
S.M. Mashihure Romman
Page 15
22/11/2013
RP/RP-CORE001-07
S.M. Mashihure Romman
Page 16
22/11/2013
RP/RP-CORE001-07
S.M. Mashihure Romman
Page 17
22/11/2013
RP/RP-CORE001-07
S.M. Mashihure Romman
Page 18
22/11/2013
RP/RP-CORE001-07
5) Reading Materials:
1. Read from http://en.wikpedia.org/wiki/GSM 2. Read from \\GP-PC-13000465\Workflow_Procedure to learn the procedure of work flow in RP and GP as a whole. 3. Read from \\GP-PC-13000465\Guide_Book to learn basic information on GSM network a whole. 4. Read from \\GP-PC-13000465\Optimization_Report to learn about Optimization report on weekly basis. 5. Get introduced with \\GP-PC-13000465 folders. 6. Get introduced with G:\Technical\Planning\Radio Planning folders. 7. Get familiar with RP-Intranet i.e. http://GP-PC-13000465/rp 8. Get Mentum Planet V 5.3 Training Material : \\GP-PC13000465\Documentation\Peter Cheug 2011\ Information: Required software needed for Drive Test Group are available at \\GP-PC13000465\Drivetest_Tools_Software
6) M2000 and PRS Installation files and installation procedure Please go through the below procedure to install the M2000 V2R11 Client at your PC and be sure that it works properly. Make sure that you have admin privilege at your PC and you have at least 2 GB free space in your PC.
Install Procedure of iManager M2000 V2R11 Client: 1. Type the below URL address at your browser: http://10.178.241.11/cau/
S.M. Mashihure Romman
Page 19
22/11/2013
RP/RP-CORE001-07 Then below window will appear:
2. Click Setup: if you do not have the updated Java installed in your PC, the following window will appear:
S.M. Mashihure Romman
Page 20
22/11/2013
RP/RP-CORE001-07 3. Click OK: the below windows will appear sequentially
:
N.B.== Select (√) Always trust content from this publisher
4. Click Run: then the below windows will appear consecutively:
S.M. Mashihure Romman
Page 21
22/11/2013
RP/RP-CORE001-07
5. Select : accept these terms and Click Next: the below window
will come:
S.M. Mashihure Romman
Page 22
22/11/2013
RP/RP-CORE001-07
Important! 6. Must type in the destination folder as follows: C:\iManagerM2000Client_V2R11 and Click Next: Following message box will appear:
7. Click Yes: then must write iManager M2000 Client_V2R11 at the Shortcut Folder box like below::
S.M. Mashihure Romman
Page 23
22/11/2013
RP/RP-CORE001-07
8. Then by clicking simple next->next…Complete the installation like this: This may take few minutes (10-15):
9. Then log in the newly installed M2000 V2R11 Client by going: Start-> Programs->iManagerM2000Client_V2R11->M2000 Client:
S.M. Mashihure Romman
Page 24
22/11/2013
RP/RP-CORE001-07
10.
Add the IP’s of M2000 server like this:
11. Then log in by your M2000 User -name and below window will appear:
S.M. Mashihure Romman
Page 25
22/11/2013
RP/RP-CORE001-07
OLD M2000 without CME Please follows any of the links to install M2000 client: http://10.191.16.139/cau (BSS01) http://10.196.16.139/cau (BSS02) http://10.184.240.11/cau (BSS03)
http://10.177.241.32:8010/cau/ (prs1) http://10.184.241.11:8010/cau/ (prs2) Then set the IP address as per below:
M2k BSS Server Info BSS01 (10.191.16.139) BSS02 (10.196.16.139) BSS03 (10.184.240.11) & BSS04 (10.184.240.139) BSS05 (10.184.245.11) & BSS06 (10.184.246.11)
PRS info BSS01-Embeded BSS02-Embeded PRS01 (10.177.241.32) PRS02 (10.184.241.11)
Please note that: only install one interface for M2000 and PRS and then add IP address from the option. Serial : CME CME Installation: 1. \\GP-PC-13000465\Tools_Software\CME software\Match\Client(Include Standalone Mode)\Setup.exe 2. \\GP-PC-13000465\Tools_Software\CME software\Patch\Client(Include Standalone Mode)\Client_patch.exe
