Richer Link Technology Co.,Ltd Email:
[email protected] Http://www.richerlink.com
RL8008G V20 Start the template
Suitable for all beginners,hope can help you.
Step 1
Connect to the OLT
Connect to the GPON OLT Via serial port Baud rate:9600
Step 2
Account/password:admin/admin Account/password:adm in/admin
Create vlan
SWITCH#config
t
SWITCH(config)# bridge SWITCH(bridge)#vlan create 20-100
Step 3
*create vlan 20-100,default vlan name is br20
Set vlan rules
SWITCH(bridge)# vlan add default 3-14,16-26 untagged
*VLAN and port binding
SWITCH(bridge)# vlan add br20 1-2 tagged SWITCH(bridge)# vlan add br20 15 untagged SWITCH(bridge)# vlan pvid 1-14,16-26 1 SWITCH(bridge)# vlan pvid 15 20 SWITCH(bridge)# exit
Step 4
Set interface ip
SWITCH(config)#interface br20 SWITCH(config)#no shutdown SWITCH(config)#ip proxy-arp
第 1 页,共 6 页
*Set port pvid
Richer Link Technology Co.,Ltd Email:
[email protected] Http://www.richerlink.com
SWITCH(config)#ip address 192.168.200.2/24
Step 5
Create DBA profile
SWITCH(config)#gpon SWITCH(gpon)# dba-profile 100M create SWITCH(config-dba-profile[100M])# mode sr SWITCH(config-dba-profile[100M])# sla fixed 102400 SWITCH(config-dba-profile[100M])#sla maximum 1024000 SWITCH(config-dba-profile[100M])#apply
Step 6
Create vlan filtering rules only for SFU
SWITCH(gpon)#extended-vlan-tagging-operation sfu create SWITCH(config-ext-vlan-oper[sfu])# downstream-mode enable SWITCH(config-ext-vlan-oper[sfu])# untagged-frame 1 SWITCH(config-ext-vlan-oper[sfu])# treat inner vid 20 cos 0 tpid 0x8100 SWITCH(config-ext-vlan-oper[sfu])# single-tagged-frame 1 SWITCH(config-ext-vlan-oper[sfu])# filter inner vid 20 cos any tpid any SWITCH(config-ext-vlan-oper[sfu])# treat remove single SWITCH(config-ext-vlan-oper[sfu])#treat inner vid 20 cos copy-inner tpid copy-inner SWITCH(config-ext-vlan-oper[sfu])#apply SWITCH(config-ext-vlan-oper[sfu])# exit
Step 7
Create traffic-profile for SFU
SWITCH(gpon)# traffic-profile sfu create SWITCH(config-traffic-pf[sfu])# mgmt-mode uni eth 1 omci SWITCH(config-traffic-pf[sfu])#tcont 1 SWITCH(config-traffic-pf[sfu]-tcont[1])# gemport 1/1
第 2 页,共 6 页
Richer Link Technology Co.,Ltd Email:
[email protected] Http://www.richerlink.com
SWITCH(config-traffic-pf[sfu]-tcont[1])# dba-profile 100M SWITCH(config-traffic-pf[sfu]-tcont[1])# exit SWITCH(config-traffic-pf[sfu])# mapper 1 SWITCH(config-traffic-pf[sfu]-mapper[1])# gemport count 1 SWITCH(config-traffic-pf[sfu]-mapper[1])#exit SWITCH(config-traffic-pf[sfu])# bridge 1 SWITCH(config-traffic-pf[sfu]-bridge[1])# ani mapper 1 SWITCH(config-traffic-pf[sfu]-bridge[1])# uni eth 1 SWITCH(config-traffic-pf[sfu]-bridge[1]-uni[eth:1])#extended-vlan-tagging-operation
sfu SWITCH(config-traffic-pf[sfu]-bridge[1]-uni[eth:1])#exit SWITCH(config-traffic-pf[sfu])# apply
Step 8
Create traffic-profile for HGU
SWITCH(gpon)# traffic-profile hgu create SWITCH(config-traffic-pf[hgu])#mgmt-mode uni eth 1 non-omci link virtual-eth 1 SWITCH(config-traffic-pf[hgu])#mgmt-mode uni eth 2 non-omci link virtual-eth 1 SWITCH(config-traffic-pf[hgu])# tcont 1 SWITCH(config-traffic-pf[hgu]-tcont[1])#gemport 1/1-1/4 SWITCH(config-traffic-pf[hgu]-tcont[1])#dba-profile 100m SWITCH(config-traffic-pf[hgu]-tcont[1])# exit SWITCH(config-traffic-pf[hgu])# mapper 1 SWITCH(config-traffic-pf[sfu]-mapper[1])#gemport count 4 SWITCH(config-traffic-pf[sfu]-mapper[1])#exit SWITCH(config-traffic-pf[hgu])# bridge 1 SWITCH(config-traffic-pf[sfu]-bridge[1])#ani mapper 1
第 3 页,共 6 页
Richer Link Technology Co.,Ltd Email:
[email protected] Http://www.richerlink.com
SWITCH(config-traffic-pf[sfu]-bridge[1])#uni virtual-eth 1 SWITCH(config-traffic-pf[sfu]-bridge[1]-uni[virtual-eth:1])#
vlan-operation
us-oper keep SWITCH(config-traffic-pf[sfu]-bridge[1]-uni[virtual-eth:1])#
vlan-operation ds-oper keep SWITCH(config-traffic-pf[hgu])#apply
Step 9 Create onu-profile SWITCH(gpon)# onu-profile sfu create
*create onu-profile for sfu
SWITCH(config-onu-pf[sfu])# traffic-profile sfu SWITCH(config-onu-pf[sfu])# apply SWITCH(config-onu-pf[sfu])# exit SWITCH(gpon)# onu-profile hgu create
*create onu-profile for hgu
SWITCH(config-onu-pf[sfu])# traffic-profile hgu SWITCH(config-onu-pf[sfu])# apply
Step 10
Add onu for pon port
SWITCH(gpon)# gpon-olt 1
* 1 ---->PON 1 of OLT
SWITCH(config-gpon-olt[1])#olt auto-to-manual enable SWITCH(config-gpon-olt[1])#onu auth-control enable SWITCH(config-gpon-olt[1])#discover-serial-number start 20 SWITCH(config-gpon-olt[1])#onu add 1 RLGM0009b648 auto-learning
*auto
SWITCH(config-gpon-olt[1])#onu add 2 ARGM1014ed8d auto-learning
*auto
SWITCH(config-gpon-olt[1])#onu service-mode 1 sfu SWITCH(config-gpon-olt[1])#onu service-mode 2 hgu SWITCH(config-gpon-olt[1])#onu-profile 1 sfu SWITCH(config-gpon-olt[1])#onu-profile 2 hgu
第 4 页,共 6 页
*set onu 1 mode-->sfu *set onu 2 mode-->hgu
Richer Link Technology Co.,Ltd Email:
[email protected] Http://www.richerlink.com
SWITCH(config-gpon-olt[1])#exit
Step 11
Config SNMP
SWITCH(config)# snmp contact 8008G-v20 SWITCH(config)# snmp location china SWITCH(config)# snmp community ro public SWITCH(config)# snmp community rw private SWITCH(config)# snmp trap-mode alarm-report SWITCH(config)# snmp trap-host 192.168.5.12 SWITCH(config)# snmp trap2-host 192.168.5.12
*Management pc ip is 192.168.5.12 version2
SWITCH(config)# snmp notify-activity enable
Step 12
Save configuration
SWITCH(config)#end SWITCH#write memory
Step 13
Troubleshooting
SWITCH(config)#show running-configuration SWITCH(config)# show onu info
******************************************************* Change the management ip address
SWITCH(config)#interface mgmt SWITCH(config)#no shutdown SWITCH(config)#ip address xxx.xxx.xxx.xxx/xx
第 5 页,共 6 页
Richer Link Technology Co.,Ltd Email:
[email protected] Http://www.richerlink.com
第 6 页,共 6 页