Metallic Ring Type Joint Gaskets (R (RTJ) TJ)
RTJ (Ring Type Joints) •
•
•
•
Metallic ring type joint gaskets are heavy duty, high-pressure gaskets largely used in offshore and onshore petrochemical applications. They are precision-engineered components designed to be used in conjunction with precision-machined flanges. All our Ring Joints are manufactured according to ASME B16.20 and API 6A. The gasket material is selected on a number of grounds primarily; chemical compatibility with the media and the hardness of the flange. The gasket material ideally needs to be roughly 30 Brinell less than the flange material to ensure sufficient deformation of the gasket without damaging the flange facing. Worn, pitted or corroded flange sealing surfaces can impede the sealing ability of RTJ gaskets. In such instances, a serrated octagonal RTJ gasket, covered with flexible graphite or a Maxiflex CR-RJ, can provide a temporary or emergency solution until the flange can be repaired or replaced. The sealing surfaces on the ring joint grooves must be smoothly finished to 63 Microinches and be free of objectionable ridges, tool or chatter marks.
A number of ring joint styles are available designed for specific flange types, these are:
Style R Oval Size/Pressure Class: ½” to 24” : 150 to 2500 ASME B16.20 26” to 36” : 300 to 900 ASME B16.47 Series A 1 ½” to 20” : API 6A Applications: • Used for high pressure applications. Typical Properties: • High integrity seal at high pressures • Suitable for flat and round bottom groove flanges. Interchangeable on modern octagonal type grooved flanges. • Available in Ring numbers R11 to R105
Style RX Size/Pressure Class: 1 ½” to 20” : 720 to 5000 API 6A Applications: • Used for high pressure applications. • The Style RX is designed to fit the same groove design as a standard style R making joints interchangeable • The Style RX has an increased height and utilizes the internal system pressure to energize and improve the seal as internal pressure increase • Suitable for flat bottom groove flanges Also available in style SRX.
Style R Octagonal Size/Pressure Class: ½” to 24” “ 150 to 2500 ASME B16.20 26” to 36” : 300 to 900 ASME B16.47 Series A 1 ½” to 20” : API 6A Applications: • Used for high pressure applications. Typical Properties • High integrity seal at high pressures • The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket • Suitable for flat bottom groove flanges • Available in Ring numbers R11 to R105
Style BX Size/Pressure Class: 1 11/16” to 30” : 2000 to 20000 API 6A Applications: • The Style BX energised ring type joint is manufactured in accordance with API 6A for use in high pressures. • Style BX ring type joints incorporate a pressure passage hole to allow for pressure equalization each side of the sealing faces. • Style BX is not interchangeable with any other style, and is only suited for API 6BX flanges . Also available in style SBX.
RTJ type R
Type R Oval and Octagonal RTJ Dimensions to ASME B16.20 ,API 6A Nominal Pipe Size (DN in mm) and
Gasket Dimensions
Pressure Class Class
Class
Class
Class
Class
Class
150
300
600
900
1500
2500
15
15 15
20
15
20
15 20
20
25 25
25
25
25
20
32 32
32
32
32
25
40 40
40
40
40 32
50 50
50
40 50
50
65 65
65
50 65
65 65
80 80
80
80
80
80 80
90 90
90 80
100
Ring
Pitch Diam.
Width
Height
C ,Width of
R1 , Radius in
No.
P
A
B,Oval
H,Octagonal
Flat Oct.
Oct. Ring
(±0.18)
(±0.20)
(±0.50)
(±0.50)
(±0.20)
(±0.5)
R11
34.13
6.35
11.18
9.65
4.32
1.5
R12
39.70
7.95
14.22
12.70
5.23
1.5
R13
42.87
7.95
14.22
12.70
5.23
1.5
R14
44.45
7.95
14.22
12.70
5.23
1.5
R15
47.63
7.95
14.22
12.70
5.23
1.5
R16
50.80
7.95
14.22
12.70
5.23
1.5
R17
57.15
7.95
14.22
12.70
5.23
1.5
R18
60.32
7.95
14.22
12.70
5.23
1.5
R19
65.10
7.95
14.22
12.70
5.23
1.5
R20
68.28
7.95
14.22
12.70
5.23
1.5
R21
72.24
11.13
17.53
16.00
7.75
1.5
R22
82.55
7.95
14.22
12.70
5.23
1.5
R23
82.55
11.13
17.53
16.00
7.75
1.5
R24
95.25
11.13
17.53
16.00
7.75
1.5
R25
101.60
7.95
14.22
12.70
5.23
1.5
R26
101.60
11.13
17.53
16.00
7.75
1.5
R27
107.95
11.13
17.53
16.00
7.75
1.5
R28
111.13
12.70
19.05
17.53
8.66
1.5
R29
114.30
7.95
14.22
12.70
5.23
1.5
R30
117.48
11.13
17.53
16.00
7.75
1.5
R31
123.83
11.13
17.53
16.00
7.75
1.5
R32
127.00
12.70
19.05
17.53
8.66
1.5
R33
131.78
7.95
14.22
12.70
5.23
1.5
R34
131.78
11.13
17.53
16.00
7.75
1.5
R35
136.53
11.13
17.53
16.00
7.75
1.5
R36
149.23
7.95
14.22
12.70
5.23
1.5
RTJ type R Gasket Dimensions
Nominal Pipe Size (DN in mm) and Pressure Class Class
Class
Class
Class
Class
Class
150
300
600
900
1500
2500
100
100
100 100 100
125 125
125
125 125
150 125 150
150
150 150 150
200 200
200
200 200 200
250 250
250
250 250 250
300 300
300
300 300
350 300 350
350 350 350
400 400
400 400 400
450 450
450 450 450
500 500
500 500 500
600 600
600 600
Ring
Pitch Diam.
Width
Height
C ,Width of
R1 , Radius in
No.
P
A
B,Oval
H,Octagonal
Flat Oct.
Oct. Ring
(±0.18)
(±0.20)
(±0.50)
(±0.50)
(±0.20)
(±0.5)
R37
149.23
11.13
17.53
16.00
7.75
1.5
R38
157.18
15.88
22.35
20.57
10.49
1.5
R39
161.93
11.13
17.52
16.00
7.75
1.5
R40
171.45
7.95
14.22
12.70
5.23
1.5
R41
180.98
11.13
17.53
16.00
7.75
1.5
R42
190.50
19.05
25.40
23.88
12.32
1.5
R43
193.68
7.95
14.22
12.70
5.23
1.5
R44
193.68
11.13
17.53
16.00
7.75
1.5
R45
211.15
11.13
17.53
16.00
7.75
1.5
R46
211.15
12.70
19.05
17.53
8.66
1.5
R47
228.60
19.05
25.40
23.88
12.32
1.5
R48
247.65
7.95
14.22
12.70
5.23
1.5
R49
269.88
11.13
17.53
16.00
7.75
1.5
R50
269.88
15.88
22.35
20.57
10.49
1.5
R51
279.40
22.23
28.70
26.92
14.81
1.5
R52
304.80
7.95
14.22
12.70
5.23
1.5
R53
323.85
11.13
17.53
16.00
7.75
1.5
R54
323.85
15.88
22.35
20.57
10.49
1.5
R55
342.90
28.58
36.58
35.05
19.81
2.3
R56
381.00
7.95
14.22
12.70
5.23
1.5
R57
381.00
11.13
17.53
16.00
7.75
1.5
R58
381.00
22.23
28.70
26.92
14.81
1.5
R59
396.88
7.95
14.22
12.70
5.23
1.5
R60
406.40
31.75
39.62
38.10
22.33
2.3
R61
419.10
11.13
17.53
16.00
7.75
1.5
R62
419.10
15.88
22.35
20.57
10.49
1.5
R63
419.10
25.40
33.27
31.75
17.30
2.3
R64
454.03
7.95
14.22
12.70
5.23
1.5
R65
469.90
11.13
17.53
16.00
7.75
1.5
R66
469.90
15.88
22.35
20.57
10.49
1.5
R67
469.90
28.58
36.58
35.05
19.81
2.3
R68
517.53
7.95
14.22
12.70
5.23
1.5
R69
533.40
11.13
17.53
16.00
7.75
1.5
R70
533.40
19.05
25.40
23.88
12.32
1.5
R71
533.40
28.58
36.58
35.05
19.81
2.3
R72
558.80
7.95
14.22
12.70
5.23
1.5
R73
584.20
12.70
19.05
17.53
8.66
1.5
R74
584.20
19.05
25.40
23.88
12.32
1.5
R75
584.20
31.75
39.62
38.10
22.33
2.3
R76
673.10
7.95
14.22
12.70
5.23
1.5
R77
692.15
15.88
22.35
20.57
10.49
1.5
R78
692.15
25.40
33.27
31.75
17.30
2.3
RTJ type R Nominal Pipe Size (DN in mm) and
Gasket Dimensions
Pressure Class
Ring
Pitch Diam.
Width
No.
P
A
B,Oval
H,Octagonal
Flat Oct.
Oct. Ring
(±0.18)
(±0.20)
(±0.50)
(±0.50)
(±0.20)
(±0.5)
R80
615.95
7.95
…
12.70
5.23
1.5
R81
635.00
14.30
…
19.05
9.58
1.5
25
R82*
57.15
11.13
…
16.00
7.75
1.5
40
R84*
63.50
11.13
…
16.00
7.75
1.5
50
R85*
79.38
12.70
…
17.53
8.66
1.5
65
R86*
90.50
15.88
…
20.57
10.49
1.5
80
R87*
100.03
15.88
…
20.57
10.49
1.5
100
R88*
123.83
19.05
…
23.88
12.32
1.5
90
R89*
114.30
19.05
…
23.88
12.32
1.5
125
R90*
155.58
22.23
…
26.92
14.81
1.5
250
R91*
260.35
31.75
…
38.10
22.33
2.3
R92
228.60
11.13
17.53
16.00
7.75
1.5
Class
Class
Class
Class
Class
Class
Class
150
300
600
900
1500
2500
10000* (API)
550 550
550
Height
C ,Width of
R1 , Radius in
650
650
R93
749.30
19.05
…
23.88
12.32
1.5
700
700
R94
800.10
19.05
…
23.88
12.32
1.5
750
750
R95
857.25
19.05
…
23.88
12.32
1.5
800
800
R96
914.40
22.23
…
26.92
14.81
1.5
850
850
R97
965.20
22.23
…
26.92
14.81
1.5
900
900
R98
1022.35
22.23
…
26.92
14.81
1.5
R99
234.95
11.13
…
16.00
7.75
1.5
650
R100
749.30
28.58
…
35.05
19.81
2.3
700
R101
800.10
31.75
…
38.10
22.33
2.3
750
R102
857.25
31.75
…
38.10
22.33
2.3
800
R103
914.40
31.75
…
38.10
22.33
2.3
850
R104
965.20
34.93
…
41.40
24.82
2.3
900
R105
1022.35
34.93
…
41.40
24.82
2.3
Dimensions in mm
*These rings conform to API standard 6A
RTJ type RX
Type RX RTJ Dimensions to ASME B16.20 , API 6A Nominal
Class
Size
Ring
OD of
Width of
Width of
Height of
Height of
Radius in
Hole
No.
Ring
Ring,A
Flat,C
Outside Bevel,D
Ring,H
Ring,R1
Size,E
1 ½”
2000,3000,5000
RX 20
76.20
8.73
4.62
3.18
19.05
1.5
…
2”
2000
RX 23
93.27
11.91
6.45
4.24
25.40
1.5
…
2”
3000,5000
RX 24
105.97
11.91
6.45
4.24
25.40
1.5
…
3 ⅛”
5000
RX 25
109.55
8.74
4.62
3.18
19.05
1.5
…
2 ½”
2000
RX 26
111.91
11.91
6.45
4.24
25.40
1.5
…
2 ½”
3000,5000
RX 27
118.26
11.91
6.45
4.24
25.40
1.5
…
3”
2000,3000
RX 31
134.54
11.91
6.45
4.24
25.40
1.5
…
3”
5000
RX 35
147.24
11.91
6.45
4.24
25.40
1.5
…
4”
2000,3000
RX 37
159.94
11.91
6.45
4.24
25.40
1.5
…
4”
5000
RX 39
172.64
11.91
6.45
4.24
25.40
1.5
…
5”
2000,3000
RX 41
191.69
11.91
6.45
4.24
25.40
1.5
…
5”
5000
RX 44
204.39
11.91
6.45
4.24
25.40
1.5
…
6”
2000,3000
RX 45
221.84
11.91
6.45
4.24
25.40
1.5
…
6”
5000
RX 46
222.25
13.49
6.68
4.78
28.58
1.5
…
8”
Crossover flange
RX 47
245.26
19.84
10.34
6.88
41.28
2.3
…
8”
2000,3000
RX 49
280.59
11.91
6.45
4.24
25.40
1.5
…
8”
5000
RX 50
283.36
16.66
8.51
5.28
31.75
1.5
…
10”
2000,3000
RX 53
334.57
11.91
6.45
4.24
25.40
1.5
…
10”
5000
RX 54
337.34
16.66
8.51
5.28
31.75
1.5
…
12”
2000,3000
RX 57
391.72
11.91
6.45
4.24
25.40
1.5
…
14”
5000
RX 63
441.73
27.00
14.78
8.46
50.80
2.3
…
16”
2000
RX 65
480.62
11.91
6.45
4.24
25.40
1.5
…
16”
3000
RX 66
483.39
16.66
8.51
5.28
31.75
1.5
…
18”
2000
RX 69
544.12
11.91
6.45
4.24
25.40
1.5
…
18”
3000
RX 70
550.06
19.84
10.34
6.88
41.28
2.3
…
20”
2000
RX 73
596.11
13.49
6.68
5.28
31.75
1.5
…
RTJ type RX Nominal
Class
Size
Ring
OD of
Width of
Width of
Height of
Height of
Radius in
Hole
No.
Ring
Ring,A
Flat,C
Outside Bevel,D
Ring,H
Ring,R1
Size,E
20”
3000
RX 74
600.86
19.84
10.34
6.88
41.28
2.3
…
1”
10000
RX 82
67.87
11.91
6.45
4.24
25.40
1.5
1.5
1 ½”
10000
RX 84
74.22
11.91
6.45
4.24
25.40
1.5
1.5
2”
10000
RX 85
90.09
13.49
6.68
4.24
25.40
1.5
1.5
2 ½”
10000
RX 86
103.58
15.09
8.51
4.78
28.58
1.5
2.4
3”
10000
RX 87
113.11
15.09
8.51
4.78
28.58
1.5
2.4
4”
10000
RX 88
139.29
17.48
10.34
5.28
31.75
1.5
3.0
3 ½”
10000
RX 89
129.77
18.26
10.34
5.28
31.75
1.5
3.0
5”
10000
RX 90
174.63
19.84
12.17
7.42
44.45
2.3
3.0
10”
10000
RX 91
286.94
30.18
19.81
7.54
45.24
2.3
3.0
8”
2000,3000
RX 99
245.67
11.91
6.45
4.24
25.40
1.5
…
1 ¼”
5000
RX 201
51.46
5.74
3.20
1.45
11.30
0.5
…
1 ¾”
5000
RX 205
62.31
5.56
3.05
1.83
11.10
0.5
…
2 ½”
5000
RX 210
97.64
9.53
5.41
3.18
19.05
0.8
…
4”
5000
RX215
140.89
11.91
5.33
4.24
25.40
1.5
…
Dimensions in mm
RTJ type BX
Type BX RTJ Dimensions to ASME B16.20, API 6A Nominal
Class
Ring
OD of
Height of
Width of
OD of
Width of
1 11/16”
10000,15000
No.
Ring
Ring,H
Ring,A
Flat,ODT
Flat,C
D
BX 150
72.19
9.30
9.30
70.87
7.98
1.6
1 13/16”
10000,15000,20000
BX 151
76.40
9.63
9.63
75.03
8.26
1.6
2 1/16”
10000,15000,20000
BX 152
84.68
10.24
10.24
83.24
8.79
1.6
2 9/16”
10000,15000,20000
BX 153
100.94
11.38
11.38
99.31
9.78
1.6
3 1/16”
10000,15000,20000
BX 154
116.84
12.40
12.40
115.09
10.64
1.6
4 1/16”
10000,15000,20000
BX 155
147.96
14.22
14.22
145.95
12.22
1.6
7 1/16”
10000,15000,20000
BX 156
237.92
18.62
18.62
235.28
15.98
3.2
9”
10000,15000
BX 157
294.46
20.98
20.98
291.49
18.01
3.2
11”
10000,15000
BX 158
352.04
23.14
23.14
348.77
19.86
3.2
13 5/8”
10000
BX 159
426.72
25.70
25.70
423.09
22.07
3.2
13 5/8”
5000
BX 160
402.59
23.83
13.74
399.21
10.36
3.2
16 5/8”
5000
BX 161
491.41
28.07
16.21
487.45
12.24
3.2
16 5/8”
5000,10000
BX 162
475.49
14.22
14.22
473.48
12.22
1.6
18 ¾”
5000
BX 163
556.16
30.10
17.37
551.89
13.11
3.2
18 ¾”
100000
BX 164
570.56
30.10
24.59
566.29
20.32
3.2
21 ¼”
5000
BX 165
624.71
32.03
18.49
620.19
13.97
3.2
21 ¼”
10000
BX 166
640.03
32.03
26.14
635.51
21.62
3.2
26 ¾”
2000
BX 167
759.36
35.87
13.11
754.28
8.03
1.6
26 ¾”
3000
BX 168
765.25
35.87
16.05
760.17
10.97
1.6
5 1/8”
10000
BX 169
173.51
15.85
12.93
171.27
10.69
1.6
Size
Hole Size
6 5/8”
10000,15000
BX 170
218.03
14.22
14.22
216.03
12.22
1.6
8 9/16”
10000,15000
BX 171
267.44
14.22
14.22
265.43
12.22
1.6
11 5/32”
10000,15000
BX 172
333.07
14.22
14.22
331.06
12.22
1.6
2000,3000
BX 303
852.75
37.95
16.97
847.37
11.61
1.6
30”
Dimensions in mm
Material
Brinell Hardness Maximum
Temperature Limitation
Identification
Soft Iron
90
-60 to +400 ⁰C
D
Low Carbon Steel
120
-40 to +500 ⁰C
S
4%-6% Cr ½% Mo
130
-125 to +500 ⁰C
F5
Stainless Steel 304
160
-250 to +650 ⁰C
S304
Stainless Steel 316
160
-196 to +800 ⁰C
S316
Stainless Steel 321
160
-250 to +870 ⁰C
S321
Stainless Steel 347
160
-250 to +870 ⁰C
S347
Stainless Steel 410
170
-20 to +500 ⁰C
S410
Inconel 625
-
+1000⁰C
625
Incoloy 825
-
+1000⁰C
825
Hastelloy C276
-
+1000⁰C
C-276
Duplex
-
+800⁰C
S31803
Titanium
-
+540⁰C
Ti
Please note that the properties shown here are typical and suitability for actual application should always be determined by a suitably qualified Engineer . Specifications are subject to change without notice .
Klinger Limited guarantees the quality, materials and workmanship of all its products either manufactured or distributed, but cannot be held responsible for the manner in which they are used, fitted or stored Klinger Ltd, 38 Mc Dowell Street, Welshpool, WA, 6106, Australia. Telephone local: 1300 798 279. Telephone Int: +61 8 92511600 Fax : +61 8 93509286 Web page: www.klinger.com.au For further advice please contact:
[email protected] Subject to technical alternations 8999004 -Issue: Aug 2012
