Figure 7-7 Six RRUs installed on a pole in centralized mode
7.2.1 Installing a Single RRU This section describes the procedure for installing a single RRU on a pole and the precautions that must be taken during the installation.
Prerequisites Before you install an RRU on a tower, the RRU and mounting kits are hoisted onto the tower. For details, see 6.1 Hoisting an RRU onto a Tower. The hoist clamp on the main mounting bracket is secured properly.
Procedure Step 1 Determine a position for installing the main mounting bracket. l
If the RRU must be installed on a tower, see 3.5.1 Clearance for a Single RRU to determine a position.