Product Catalogue
Company Profile Its manufacturing plant, which boasts of the state-of-the-art plant and machinery and technical knowhow, is located in Sohar in the Sultanate of Oman with reputed experienced technical knowhow. The major raw materials for body namely ball clay and china clay are imported from UK and almost all glaze materials are imported from reputed companies in UK or west Europe. The products of Oman Ceramics Company SAOG (OCC) are sold under the brand name WAVE. Its products are exported to over twelve different countries and are available at over 500 outlets around around the world. Primary markets where OCC’s products are sold in WAVE brand name in Oman, UAE, Saudi Arabia, Bahrain, Qatar, Kuwait, Jordan, Syria, Srilanka etc. We Export 30% of our production to U.K market which itself a testimonial for World class Quality Sandards.
Our focus on quality begins from the r aw material stage itself. The raw materials used in body and glaze preparation are mostly imported from reputed companies in the UK. There are numerous quality checks during every stage in the body and glaze preparation. The kilns which run on natural gas are from U.K. with state of the art controls. The finished ware is checked for various parameters such as water absorption, crazing resistance, resistance to chemicals, resistance to staining and burning, abrasion based on European/British and SASO standards. We are con fident that you will find the quality and reliability of our products will exceed your expectations and will give you many years of trouble free performance. Welcome to the world of World-Class Sanitaryware and experience the change. Oman Ceramics Co. SAOG (OCC) was set up in the year 1999 to manufacture high quality vitreous china sanitaryware primarily for exports to the discerning customers in western Europe.
OCC’s products meet the requirements of British Standards, Standards, SASO standards (Saudi Arabian Standards Organization) and also approved by various prestigious consultants, builders and Government organizations. We have Quality Management system ISO 9001: 2008 from UKAS International Certification agency. Our products are certified by KIWA,Netherland for its remarkable quality in the interntional market. CERAM which is the product certification body approved our products for this european market. In addition to this OCC has third party certificate from EXOVA is the bench mark certificate for the gulf countries. Our products are approved by Abu Dhabi Municipality, Ministry of Housing and Works, Kuwait, Ministry of Defence Engineering Services, Diwan of Royal court, Royal Palace Palace Affairs Oman, Royal Oman Police, Ministry of Education, Oman Ministry of Housing, Electricity and Water, Oman and other ministries in the Sultanate of Oman. OCC has supplied its products to many prestigious projects in the U.A.E. The product range available is vast and varies from the simple and elegant shapes to the wild and exotic shapes, from the elegant shapes to the wild and exotic shapes, from the contemporary and modern designs to the traditional and classic designs. OCC’s products are offered in regular colours as well as in exotic finishes such as gold, platinum, copper, bronze etc. OCC’s products are on par with the world’s leading brands in terms of their product quality and design. Despite that, the products are very competitively priced and are highly affordable.
e l i f o r P y n a p m o
e t a c i f i t r e C
World class
Sanitaryware...
Contents
Andromeda
6-7
Madrid
8-9
Wales Wa les
10-11
Vienna
12-13
Vienna Wall Wall Hung
14-15
Zurich
16-17
Zurich Wall Hung
18-19
Florence
20-21
Savoy
22-23
Lincoln
24-25
Charente
26-27
Milano
28-29
Compact
30-31
Modena
32-33
Loire
34-35
Rhine New
36-37
Domino New
38-39
Danube
40-41
Sara
42-43
Special Need Layout
78-81
Sea Shell
44-45
Boston Single Piece
82-83
Bali
46-47
Lincoln Elite
84-85
Aquasave
48-49
Smart
86-87
Greenwave
50-51
Asian Pans
88-89
Preserve
52-53
Closet Selection(CC/Single Piece/WallHung)
90-93
Children
54-55
Urinals
94-95
Loire Wall Hung
56-57
Bathtubs & Shower Enclosures
96-97
Victory Wall Hung
58-59
Seat Cover
98-99
Lounge Wall Hung
60-61
Accesories & fittings
100-101
Fifa Wall Hung
62-63
Instructions
102-103
Domino Wall Hung
64-65
Installations
104-105
Milano Wall Hung
66-67
Free Standing Basins
68-69
Vanity Basins
70-71
Wall Mounting Basins
72-73
Semi Recessed Basins
74-75
Back to Wall Closets
76-77
s t n e t n o C
Andromeda
Zurich Wall Hung
Vienna
Lincoln
7 6
3 1 2 1
9 1 8 1
5 2 4 2
e g a P
e g a P
e g a P
e g a P
Madrid
Florence
Vienna Wall Hung
Charente
9 8
5 1 4 1
1 2 0 2
7 2 6 2
e g a P
e g a P
e g a P
e g a P
Wales
Savoy
Zurich
Milano
1 1 0 1
7 1 6 1
3 2 2 2
9 2 8 2
e g a P
e g a P
e g a P
e g a P
Compact
Rhine New
Sara
Aquasave
1 3 0 3
7 3 6 3
3 4 2 4
9 4 8 4
e g a P
e g a P
e g a P
e g a P
Domino New
Modena 3 3 2 3 e g a P
Loire
Sea Shell
Greenwave
9 3 8 3
5 4 4 4
1 5 0 5
e g a P
e g a P
e g a P
Danube
Preserve
Bali
5 3 4 3
1 4 0 4
7 4 6 4
3 5 2 5
e g a P
e g a P
e g a P
e g a P
s t n e t n o C
Lounge Wall Hung
Children
Wall Mounting Basins
Milano Wall Hung
5 5 4 5
1 6 0 6
7 6 6 6
3 7 2 7
e g a P
e g a P
e g a P
e g a P
Fifa Wall Hung
Loire Wall Hung
Free Standing Basins
Semi Recessed Basins
7 5 6 5
3 6 2 6
9 6 8 6
5 7 4 7
e g a P
e g a P
e g a P
e g a P
Victory Wall Hung
Vanity Basins
Domino Wall Hung
Back to Wall Closets
9 5 8 5
5 6 4 6
1 7 0 7
7 7 6 7
e g a P
e g a P
e g a P
e g a P
Special Need Layout
Smart
Urinals
Accesories & Fittings
1 8 8 7
7 8 6 8
5 9 4 9
1 0 1 0 0 1
e g a P
e g a P
e g a P
e g a P
Bath tubs & Shower Enclosures
Asian Pans
Boston Single Piece
9 8 8 8
3 8 2 8
Bath Tubs Shower Enclosures
Instructions 7 9 6 9
3 0 1 2 0 1
e g a P
e g a P
BTSH10 1700 X 700 X 390 mm
e g a P
e g a P
Closet Selection
Lincoln Elite
BTSH12 9 0 0 X9 0 0 X1 9 50 m m BTSH09 1700 X 700 X 390 mm
BTSH13 9 0 0 X9 0 0X 1 9 50 m m
Seat Cover
(CC/Single Piece/WallHung)
Installations
5 8 4 8
3 9 0 9
9 9 8 9
e g a P
e g a P
e g a P
MOUNTINGCLAMP
MSCLAMP (40X5)
5 0 1 4 0 1 e g a P
s t n e t n o C
Andromeda
Andromeda
(Egg)
TECHNICAL DETAILS 45
35
220 7 5 0 1 2
Suave contemporary design with style and substance to adorn any modern bathroom
0 0 4 1 3 5 0 1 8
350 550
15 Suitable for top mounting fasteners of seat covers. Side access holes ONLY ON REQUEST for mounting angle valves out side
730 450
Outlet nominal 102 (4”) Box rim flush
355
0 6 1
5 0 8
0 5 7 8 3 2
Inlet is at the left of the tanks on bottom seen from front normally. Suitable for ½” inlet.
0 1 4
0 9 1
175
As the back of the closet is completely closed for this model, all mounting shall be completed before fixing. For seat cover, top mounting fasteners are preffered. Inlet hose shall be flexible with its control valve within the enclosure of closet. Please ask for side access holes if you wish to mount angle valves out the closet enclosure 45
35
237
7 6
0 0 2
0 4 3
0 1 5
300
5 3 4
EG TK 360
This wash basin has no access from sides. Hence, recommended to fix angle valves within enclosed space of the basin. Th is basin can be accessed from bottom for maintenance.
550
65
45
35
0 2 2
0 8 3
220
575
EG WB FS1
EG WC P
EG BD
EG WB WH1
0 0 4
a d e m o r d n A
madrid
TECHNICAL DETAILS
madrid
045
205
035
Redefine your bathroom with a perfect blend of lines and contours of this suite
017
0 7 1 5 4 4
0 5 8
555
185
5 7 3
695 315
0 2 8
0 6 1
MD WB 551
0 0 6 6 2 3
5 8 3
0 9 1
MD TK 230
045
016
035
0 7 1
MD WB 551
5 4 4 0 5 2
555 265 Half Pedestal mounted with wood screws of 2’’ x No. 10 & plastic plugs of size S8
MD WC S/P
MD WB
MD HP
d i r d a m
WALES
WALES A bold new shape to enhance the ambience of your private space
TECHNICAL DETAILS
5 0 2
45
35
205
615
8 5 0
0 1 5
p
WA WB 551
a 0 r t 9 1 P
WATK
S-trap
16
WA WB 551 5 0 2 5 1 0
0 9 2
620
WA WC S/P
WA FP
WA HP
300
S E L A W
VIENNA
VIENNA Redefine your bathroom with a perfect blend of lines and contours of this suite TECHNICAL DETAILS 200
123
585 35
5 0 2
190
17mm rag bolt
5 6 4
45 0 2 8
15
Suitable for top plug mounting fasteners of seat & cover also.
8 0 4
695 Box Rim Flush
420
5 0 8 5 5 5 4 2 3
0 5 1
VN WB 551
4 0 0
P
VN TK
0 9 1
325
S
110
45 580
5 0 2
35
5 4 3
0 9 3
265
100
Use WC / Bidet Fixing Kit Type-A To be ordered seperately.
VN FP
VN WC S/P
VN BD
A N N E I V
VIENNA WALLHUNG
VIENNA WALLHUNG TECHNICAL DETAILS Waste hole 45
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden surface. Produce the hole 75mm for inserting the waste hole for fixing basin on table top.
0 3 1
400
0 6 1
75
Box Rim Flush O 15
520 430 55 5 3 1 0 6 1
0 6 2
0 6 3
5 9 5 0 4 0 3 4
320
Outlet OD=102(4’’) Floor level O 25 X2 Mounting Holes
Inlet ID=55 180
VN WH WC
0 5 1
SAMN WB
Outlet OD=102(4’’)
G N U H L L A W A N N E I V
Zurich
Zurich (Trio)
TECHNICAL DETAILS KEY HOLES FOR
11
A bold new shape to enhance the ambience of your private space
35
6 FIXING ON TABLES
45
5 5 0 5 2 2
0 1 1 0 2 2
0 3 4 5 8 1
485
35
F
100
45
G E
B
C
D
100
0 2 6
A A 500 580
485 580
B
C
440 455
390
D 820
470
820 35
E
F
190 190
218
50
235
65
G
150
45
65
16 5 3 1
265 5 4 4 390
TO WB 581
210
Please use template for fixing on the table
485
TO TK
Suitable for top plug mounting fasteners of seat & cover also. Available
dual flush system also
15
0 8 3
Outlet OD= 102mm BOX RIM FLUSH
700
TO WB 501
440 5 7 7 0 5 6 7 2 3
0 6 1
330
TO FP
TO WC S/P
0 8 1
12
TO BD
TO HP
P
0 9 1
S
235
h c i r u Z
Zurich
Zurich (Trio) Add premium to your bathrooms with a contemporary European style
TECHNICAL DETAILS O / 35
O / 45
100
E 0 8 1
B
100
C
5 9 2
150
A A 5 00 4 85 580 580 Suitable also for top plug mounting fasteners seat covers O / 15
D
B C D E 440 390 280 50 444 470 300 65
Half pedestal mounted with wood screws of 2”xNo.10 & plastic plugs of size S8
Outlet OD=102(4”) Inlet ID=55
440 555
0 6 1
Box rim flush
0 5 6 7 2 3 0 9 1
330 O / 15mm
Suitable for Top Mounting fasteners 435
Inlet ID=55
Box Rim
180 5 0 1
0 6 1
5 7 3
18
0 0 5 0 3 4
0 8 3
0 5 1
550 220
Outlet OD=102(4”) Floor level 45 555
0 1 2
35 0 5 3
55
TO WH WC
TO WB 501
5 8 3
215
h c i r u Z
Florence
Florence
TECHNICAL DETAILS
Pleasant Italian style for that feel of modern elegance
35 345
45
500
0 6 0 0 2
0 0 2 9 2 1
0 3 5
350 0 1 3
600 Half pedestal mounted with wood screws of 2”xNo.10 & plastic plugs of size S8
S=Dimension of centre of vertical outlet of EWC (S-Trap) from the wall when the tank is touching the wall=230mm
Suitable for top plug mounting fasteners of seat & cover also. Available dual flush system also
P=Dimension of centre of vertical outlet of EWC (P-Trap) from the floor =190mm Out let ø102(4”)
15
Box rim flush
3 0 8 8 2 3
0 6 1
5 4 8 0 0 4
710
FL TK
P
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet Alternative arrangements will be available on specification in your order.
FL WB 551
65
45
35
S
0 2 2 0 8 3
220 0 0 4
575
FL WC S/P
FL BD
FL HP
e c n e r o l F
SAVOY
TECHNICAL DETAILS
SAVOY (Trebecca) Distinctive form and harmonious design to add charm to your bathrooms
17
90 5 8 5 0 9 1 1 2
200 45
35
0 5 5 4 6
5 5 8
230
0 5 4 6 5 3
455 555
Over flow hole
This basin has provision for
25
) P Y T ( 5 7 3
35 0 9
45
fi xing
round towel rails underneath.
Key holes for mounting half round towel rail at bottom 0 6 2
585
5 6 1
5 8
150
0 0 2
285 Max height of wash basin with pedestal : 870 (Normally pedestal is not used with this basin. Pedestal of “SARA”can be supplied on request to match with this basin)
375 480 525
15
Side access holes ONLY ON REQUEST for mounting angle valves out side
675
TR WB 551
430
Out let
TR TK
0 8 3
0 6 1
0 0 8 9 2 3
160 Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet Alternative arrangements will be available on speci fication in your order.
TR FP
TR WC S/P
TR WB CR1
102(4”)
Box rim flush
0 8 7
0 p a 9 r T 1 -
5 9 3
P
230 S-Trap As the back of the closet is completely closed for this model, all the mounting shall be completed before fixing. For seat and cover, top mounting fasteners are preferred. Inlet hose shall be fl exible with its control valve with in the enclosure of closet.
Y O V A S
Lincoln
TECHNICAL DETAILS
Lincoln
35
45
E
Bring home the timeless elegance of an era gone by with this vintage design
F
B D G
H 5 1 8
C A A
Large wash basin Cloakroom basin
D
E
600
500
440
310
65
195
640
815
450
350
B
330
C
195
50
F
150
G
640
H
760
260
Front flush handle available with ornate ceramic knob.Customers can choose color of the knob from our standard colors. Out let Top push button also available as choice
102(4”)
Box rim flush
15 680
0 9 7
430
0 8 4
0 6 1
0 0 0 9 3 3
5 9 3
0 9 1
240 S-trap
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for½” inlet Alternative arrangements will be available on specification in your orde r. Outlet nominal
102 (4”) Box rim flush
15 490 430
LN WB 601
6
LN WB 451 0 5 2
LN TK
0 6 1
0 0 0 9 3 3
0 9 3
0 9 1
55 570 62
410
35
5 0 9 8 2 3
0 1 2
225 0 9 3
45
LN FP
LN FP
LN WC S/P
LN BTW
LN BD
n l o c n i L
Charente
Charente
TECHNICAL DETAILS
Add that touch of class to your bathrooms with this quintessential French design SIZE
A
580 650
580 660
B
C
D
480 510
185 190
215 220
35
65 D
45
C
5 7 8
B
A
Available with dual flush system also.
Suitable for top plug
Outlet nominal 102 (4”)
15 mounting seat and cover fasteners also.
Box rim flush 0 0 8
5 5 7 0 2 4
0 6 1
5 9 3
0 9 1
730
CH WB 651
230
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Alternative arrangement will be available on specification in the orde r.
CH TK
35
Also av ailab le with trap d istance o f 195mm and mounting with brackets. Sales personnel to con firm the customer choice clearly in the orders to avoid confusion in trap distances at customer’s p remises
60
45
5 2 2 0 0 8 8 2 3
600
CH FP
CH WC S/P
CH BD
205
5 8 3
e t n e r a h C
Milano
Milano
TECHNICAL DETAILS 0 3
Smoothly elegant contours embody this flowing design. Only the best for your bathrooms
5 1 2
35
45 215 0 7 8
9 1 5
665 550 basin and half pedestal also available. S=Dimension of centre of vertical outlet of EWC (S-Trap) from the wall when the tank is touching the wall=230mm P= Dimension of centre of horizondal outlet of EWC (P-Trap) from the floor=190mm, Out let 102(4”)
Suitable for top plug mounting fasteners of seat & cover also. Available lable
15
dual fl ush system also
Box rim fl ush
0 6 1
3 0 8 8 2 3
0 5 8
0 0 4
710
P
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet Alternative arrangements will be available on speci fication in your order.
65
45
35
S
MI WB 651
0 2 2
0 8 3
220
MI TK
0 0 4
575
MI WB 551
35
210
0 3
45
5 0 2 9 1 5
0 5 5 0 9 2
665 550 basin also available with half pedestal
MI FP
MI WC S/P
MI BD
MI HP
Half pedestal mounted with woodscrews of 2”xNo.10 & plastic plugs of size S8
o n a l i M
Compact
Compact
TECHNICAL DETAILS
Small is nice where space is precious. With a modern design and short projection, this model will add value and space in your bathroom
35
0 5
0 9 1
45 145
5 3 8
0 5 7 3 3 2
400 500
15 Suitable for Top plug mounting fasteners also
Out let
635
102 (4”)
Box rim flush
420 0 9 7 5 7 2
0 6 1
0 7 3
5 9 3 0 p a r 9 t 1 P
105
Normal inlet in our range is on bottom at the left of the tank, seen from front side Suitable for ½” inlet. Alternative arrangement will be available on speci fication in your order
S-trap
Use WC/BIDET fixing Kit Type-A (To be ordered separately)
45
35
585
CO WB 501 0 8 3
CO TK
5 9 3
230
50 typ
45
35
2Mounting holes. 30x20mm.
70 20
2-Tap holes
0 p y 6 t
5 0 4 0 1 2
400 450
CO FP
CO WC S/P
CO BD
0 6 1
t c a p m o C
Modena
Modena (LINE) Time for transformation! Italian style and simplicity in this design to change the look of your bathroom
TECHNICAL DETAILS 35
45
5 6
5 0 2
170
0 6 4
0 5 8 5 0 2
550 Mounting Holes of 30x25 to mount directly on the wall Recommended fastener M10-Anchor bolt
0 4 4
Half Pedestal
15mm seat mounting holes. Out let
680 430 330
102 (4”)
Box rim flush 5 7 7 0 0 7 7 2 3
0 6 1
LI WB 551
5 9 3
0 p 9 a r t 1 -
P
LI TK
S-trap
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet Alternative arrangements will be available on specification in your order.
35
250
575
45
400
5 1 2 5 0 6 6 2 3 5 8 3
70 230
LI FP
LI WC S/P
LI BD
a n e d o M
Loire
Loire
TECHNICAL DETAILS 30x20
280 Size 450 580 650 750
Bring home that look of simple elegance with this classic suite adorned with elegant grooves
A 469 602 670 750
B 308 517 545 591
C 150 200 197 195
D 860 865 875
E 232 232 244 235
E
C
A
35 D
210 B
45 450 mm wash basin is Cloak Room wash basin.this is mounted on wall with out pedestal. Half pedestal can be supplied for all sizes including 450mm size on request.
Available with dual flush system also. Suitable for top plug mounting 15 fasteners also.
425
D I ME N SI O N- A
195
680
230
740
Out let nominal 102 Box rim flush 0 0 8
0 5 2
0 6 1
T R AP D I S TA N CE
0 7 3
0 9 3
P A
S
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Alternative arrangement will be available on spec ification in the order.
S=dimension of center of vertical outlet P=dimension of center of vertical outlet of EWC (S-trap) from the wall=195 mm of EWC (P-trap) from the floor=190 mm optional size of trap distance of 230mm is also available on request.
45 590 35 0 9 3
60
LO WB 581
Size 450 580 650 750
LO TK
A 469 602 670 750
B 308 517 545 591
C 150 195 195 195
A
LO WB 451
D 280 280 280 280
E 415 470 470 472
5 0 4
280
0 0 4
23 0
30x20
35
C
E
D
B
170 45
Note: The control valves(angle valve) for tap connection shall be out side the half pedestal.
LO FP
LO WC S/P
LO BD
LOHP
Half pedestal mounted with wood screws of 2”xNo.10 & plastic plugs of size S8
e r i o L
Rhine
Rhine
TECHNICAL DETAILS
A perfect blend of form and finesse to suite your style.
35
45
0 5
Two mounting holes 30 x 25 for direct mounting on wall. Pl. Use M10 anchor bolts with flat washer and rubber cushion
5 9 1 0 0 4 0 5 2
0 4 4
145
475 560
Available with Dual Flush system also
S= dimension of centre of vertical outlet of EWC (S-trap) from the wall when the tank is touching the wall=150mm Out let 102 (4”) P= dimension of centre of vertical outlet of EWC (P-trap) to floor=190mm Out let 102 (4”) Box rim flush
15 Suitable for Top plug mounting fasteners also
0 7 2
5 6 1
0 8 7
0 7 3
0 0 4
670
P
Normal inlet in our range is on bottom at the left of the tank, seen from front side Suitable for ½” inlet. Alternative arrange ment will be available on specification in your order
S
RI TK RI WB 561
35
45
580
0 1 2 0 8 3
220
RI HP
RI WC S/P
RI BD
220
5 9 3
e n i h R
DOMINO
DOMINO Superb aesthetics and simplicity come together to infuse that touch of class in your bathrooms
TECHNICAL DETAILS
700 440 345 0 7 7
5 0 7 7 2 3
0 0 4
S-trap
235
35
45 50 70 RIM
5 5 4
0 8 4
0 2 3
DO TK 455 560
DO WB
DO WC
DO HP
W E N O N I M O D
Danube
Danube
TECHNICAL DETAILS
This universal style with a large and elegant wash basin will complement your spacious bathroom.
280 Size
A
B
C
D
E
450 580 650
450 590 665
300 509 524
140 170 176
843 850
185 215 215
100 60
8mm
E
C A 35 D
165
B
45
Trap distance(S)
Dimension-A
210
695
250
730
S= Dimension of the centre of the vertical outlet of EWC(S-trap) from the wall when the tank is touching the wall=210mm. Optional size of 250mm trap distance also available
Suitable for top plug mounting
P= Dimension of the centre of the Horizondal outlet
15 fasteners of seat covers.
of EWC(P-trap) from the floor =190mm.
430 0 2 8 5 1 4
0 6 1
3 0 9 9 2 3
0 0 4
P
DA WB 581
A
S
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet Alternative arrangements will be available on specification in your order.
DA TK DA WB 451
35
45
580
0 1 2 5 7 3
DA FP
DA WC S/P
DA BD
DA HP
230
5 9 3
e b u n a D
Sara
TECHNICAL DETAILS
Sara Elegance and economy balanced beautifully to give you enhanced value
30x25 285 650 5 1 2
35 0 6
160 45
3 7 4
0 7 8
155
. o s l a
Outlet nominal
m e t s y s
h s u fl l a u 5 d 6 e 3 l b a l i a v A
102 (4”) Open rim flush
15 Suitable for top plug mounting fasteners. 420
0 6 1
0 9 7
0 0 8 6 2 3
235
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlets.
Outlet nominal
0 0 4 0 9 1
685
102 (4”) Open rim
15 Suitable for top plug mounting fasteners. 425
fl ush
0 9 7 0 0 4
0 5 8 5 2 3
0 6 1
0 7 3
315
775
525 35
370
45
60
SA WB 551 SA TK
5 0 1 0 2 4
0 0 8 6 2 3
230 35 one tap hole
150
30 two tap holes only on request 5 4 1
420 0 5 3 5 7 1
0 9 1
45 270
SA FP
SA WC S/P
SA BD
SA CR WB
4 7 1
270 490
a r a S
Sea Shell
Sea Shell
TECHNICAL DETAILS
Quintessential nature in this sea shell design for those who cherish a natural touch
125 65
182
665 35 5 5 8 4 2 5
45
Suitable for top plug mounting
15 fasteners of seat covers. Available in dual flush system also
S = dimensions of vertical of vertical outlet of EWC (S-trap) from the wall when the tank is touching the wall=210mm. Out let 102(4”)
430
Box rim flush 5 0 4
0 6 1
3 9 2
0 8 3
0 1 8
0 0 4
690
SH WB 651
Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet. Alternative arrangements will be available on specification in your orde r.
SH TK
35
S
45
578
5 1 2 7 7 3
5 9 3
220
l l e h S a e S
SH FP
SH WC S/P
SH BD
Bali
Bali TECHNICAL DETAILS Dimensions in mm 30x20 Mounting Holes to mount directly on the wall
Recommended faster M10-Anchor bolt 280 550 35
0 0 2
0 6
160
45 5 5 4
0 5 8
SA WB 551
8 6 6
155
BA TK
15
415 320 5 9 7
5 9 3
5 6 3
0 6 1
0 0 4
690
SA FP
BA WC
230
Trap distance 110 also available
i l a B
quasave
F
8 2 x .
4
i ng
s h
u
l
Aquasave TECHNICAL DETAILS
30x20
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
280 650 35
5 1 2
0 6
160
45
5 7 4
0 7 8
155
SA WB 651 AQ TK
15 430
0 9 7 0 4 3
0 6 1
5 9 2
0 8 3 0 9 3
0 9 1
660
SA FP
AQ WC P
e v a s a u q A
reenwave
F
8 2 x .
4
i ng
s h
u
l
Greenwave 30x20
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
280 650 35
5 1 2
0 6
160
45
5 7 4
0 7 8
155
SA WB 651
SA TK GREENWAVE
15 430
0 7 3
0 6 1
Open rim flush
5 0 9 8 2 3
5 7 7
0 9 3
0 9 1
665
SA FP
GW WC P
e v a w n e e r G
i ng
s h
u
l F
8 2 x .
4
Preserve
Preserve TECHNICAL DETAILS
30x20
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
280 650 35
5 1 2
0 6
160
45
5 7 4
0 7 8
155
SA WB 651
PRESERVE-LOW FLOW FLUSH EWC(P-TRAP) RM TK
Dimensions in mm
Open rim flush O 15 mm
430 0 6 7
0 7 3
0 6 1
5 0 9 8 2 3
0 9 3 0 9 1
660
SA FP
CR WC P
e v r e s e r P
Children
Children
TECHNICAL DETAILS A
Naughty and cute! Fun in wellness for the little ones….
Size
35 0 6
A
B
C
D
500
520mm 405mm
200mm 440mm
550
565mm
455mm
200mm 455mm
650
650mm 470mm
215mm 475mm
45 B
280
C D
165
120
Half pedestal
Half pedestal mounted with wood screws of 2”xNo.10 & plastic plugs of size S8 Note: The control valves(angle valve) for tap connection shall be out side the half pedestal.
Out let 0 1 7
102(4”)
Box rim flush
0 0 3
SC TK 230 470
S- Trap
435 320
15
SC WB 551 0 6 3
5 5 6 6 2 3
0 6 1
690 Normal inlet in our range is from bottom at the left of the tank, seen from front side. Suitable for ½” inlet Alternative arrangements will be available on specification in your order.
SC WC BRS
SC HP
n e r d l i h C
Loire Wall Hung
Loire Wall Hung 25 X2 Mounting holes
TECHNICAL DETAILS
58 Inlet ID 180
Outlet OD = 102
15
Mounting with M12 anchor bolt, plain washer, nylon bush and rubber cushion.
Also suitable for top plug mounting fasteners of seat & covers
Box Rim Flush
330
0 7 3
0 6 1
100
0 7 2
425 525
LO WH WC
4 4
0 0 4 0 1 1 5 7 3
Note: Please always use soft washers below the head of mounting bolts to prevent cracking of ceramic ware due to over tightening of bolts.
Flush system options: 1. Inline flush valve (1-1/4” pipe line to be made from storage tank) 2. Low level hide away cistern with small push button 3. Hide away cistern with complete frame & large push button
g n u H l l a W e r i o L
Victory wall hung
Victory wall hung
TECHNICAL DETAILS Box Rim Flush O 15
mm
305
O 25 X2 Mounting Holes
O 55
Inlet ID
58
0 6 3
5 3 0 1 2 0 3 1 2
0 6 1
140
5 5 3
430 570
Waste hole 45
Outlet OD = 102
Over flow hole 25
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom. (Key Hole 11, slot width 7)
380
5 2 2
5 7 1
595
TU WB
VI WH WC
190
Bottom view
g n u h l l a w y r o t c i V
Lounge w all hung
Lounge w all hung TECHNICAL DETAILS
Box Rim Flush O 15 mm
325
O 55 Inlet ID O 25 X2 Mounting Holes 180
55
0 6 3
5 5 2
5 4 1
100
5 3 1 5 9
0 7 3
435 535
Outlet OD =102
35 470
45 This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
0 0 2
Bottom view
290
0 8 4 5 8 1
OL WH WC
CA WB
g n u h l l a W e g n u o L
FIFA Wall Hung
FIFA Wall Hung Box Rim Flush O 15 mm
0 5 3
325
100
O 55 Inlet ID
180
5 4
5 5 2
0 6 1
O 25 X2 Mounting Holes
0 4 1
0 0 1
0 7 3
435 Outlet OD 102
535
Over flow 25 Waste hole 45
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
( Key Hole
11, slot width7)
5 6 1
5 0 3 4 1 1
430
FI WH WC
RO WB
Bottom view
g n u h l l a W A F I F
Domino wall hung
Domino wall hung
TECHNICAL DETAILS
35
45
5 5
0 5 1
5 1 5
200
510
25mm
555
55
Mounting Holes
295 180
0 4 1 5 9 0 6 1
DO WB
DO WH
0 5 3 7 2 3
0 1 3
g n u h l l a w o n i m o D
Milano wall hung
Milano wall hung TECHNICAL DETAILS
15
0 5 8 3 5 5 3 1 9 6 2
35
MIWB 551
0 3
45
280
30x20
210
5 0 2
0 2 5
0 5 5 0 9 2
665 550 basin also available with half pedestal
MI FP
MI WH WC
Half pedestal mounted with woodscrews of 2”xNo.10 & plastic plugs of size S8
g n u h l l a w o n a l i M
Free Standing Basins
Free Standing Basins MADRID
ROUND
TECHNICAL DETAILS Over flow 25
045 035
This basinis freestandingbasinand canbe fixedonany tabletopeither Stone, plastic or woodensurface. Producethe hole 75mm0 for insert ingthewasteholefor fixingbasin on tabletop.
5 4 4
016
1 6 0
( Key Ho le
11, slot width7)
5 6 1
5 0 3 4 1 1
1 7 0
430
075
MA WB 551
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
Waste hole 45
Bottom view
FS WBR 431
555
SQUARE
SAN MARINO Waste hole 45
35
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden surface. Produce the hole 75mm for inserting the waste hole for fixing basin on table top.
470
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
0 0 2
0 3 1
400
45 Bottom view
290
0 8 4 0 6 1
5 8 1
75
CA WB 471
SAMN WB 401
STEPPED
OVAL
Waste hole
45
Over flow 25
35
45
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom. ( Key Ho le 11, slot width7)
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
25 Over flow hole
( Key Ho le
11, slot width7)
380
230 595
190
Bottom view
5 4 2
5 0 9 0 1 2
5 2 2
5 7 1
Bottom view
460
TU WB 601 FS WBR 461
s n i s a B g n i d n a t S e e r F
Vanity Basins
Vanity Basins TECHNICAL DETAILS
REGAL 35
45
485
585
70 5 2
50
ARDECH UNDER COUNTER 20
0 0 2
45 20
225
There are two models of regal was h basin. One with skirt and anot her with out skirt. The difference is onl y the height of the skirt. Paper template for cutting pro file on t he table top can be provided on request.
455
16 5 2 2
5 0 8 4 3 4
RG CT2 MOSEL 35
RIM
5 3 1
Paper template for cutting profile on the table top can be provided on request. Mounting is done with clamps fixed on the bottom of the rim. Clamps are fixed at the bottom of the table top stone by drilling with diamond drill and filling epoxy in the hole.
530 580
45
AR UC
30
0 7
0 9 1
30 5 3 2
5 4 4
PEARL UNDER COUNTER 45
Paper template for cutting profile on the table top can be provided on request.
MO CT
5 2 1
595
25 5 5 7 2 3 4
ROYAL
35
RIM
16 0 9 1
45
575
480
520 565
65
0 0 2
20 0 8 4
Paper template for cutting pro file on t he table top can be provided on request. Mounting is done wit h clamps fixed on the bottom of the rim. Clamps are fixed at the bottom of the table top stone by drilling wit h diamond drill and filling epo xy in the hole.
AR UC2
215 Paper template for cutting pro file on t he table top can be provided on request.
480
RY CT
s n i s a B y t i n a V
Wall Mounting Basins
Wall Mounting Basins TECHNICAL DETAILS 200+10
MANHATTAN
35
Mounting Holes to mount directly on the wall Recommended fastener
30x20
OXFORD
30x20 M10-Anchor bolt
45
280+10
30x20 Mounting Holes to mount directly on the wall
35
45
50
65
Recommended fastener M10-Anchor bolt
65 5 0 1 5 8 1
0 0 2
5 4 0 3 0 2
0 5 0 3 1
5 6 0 4 9 2
0 6 1
180
470 190
545
MN WB 551
This basin has provision for fixing round towel rails underneath.
SAVOY
90+5 35
505 605
Key holes for fixing
Mounting holes
Towel rail
for screws
OX SQ WB 601
8
16mm
180
45
30x20 35
45
6 5
0 5
0 5 1
5 8 5 5 9 0 1 2
0 5 4 6 5 3
DOMINO
5 1 5
200 200 455
Th is
b asin has p ro vi sio n for fixing ro und t owel
ra ils
This basin is directly mounted on the wall using two mounting holes of size 16 Pl. Use 2no. M10 anchor bolts with flat washer & rubber cushion
und er nea th.
555 200
SA WB 551 GREENWICH
395 50
510
30x20 35
DO WB 511
45
5 5 4
0 0 2
200 640
GW WB1
This is wall hung basin and no pedestal or half pedestal. Waste fittings will be visible from front. Hence chrome plated bottle trap is prof fered.
This basin is directly mounted on the wall using two mounting holes of size 16 Pl. Use 2no. M10 anchor bolts with flat washer & rubber cushion
This is wall hung basin and no pedestal or half pedestal. Waste fittings will be visible from front. Hence chrome plated bottle trap is pref fered.
s n i s a B g n i t n u o M l l a W
Semi Recessed Basins
Semi Recessed Basins
ZURICH 35
45
65
16 265
5 3 1
5 4 4
390
TO SEM WB
TECHNICAL DETAILS
210 Please use template for fixing on the table
485
SYMPHONY
0 8 1
12
Over flow Hole is placed in . left side of the Basin
35
RHONE
Two tap holes also available on request. Please also specify whether waste plug chain stay hole is required or not. 35 (for one tap hole only)
45
45 210
5 5
5 2 4
150
0 3 1
Mounting Holes 0 6 1
225
0 5 5 7 1 1
10
0 7 4
15
30
0 3 2
170
380 500
SY SEM WB
Template Drawing will be supplied along with this wash basin for cutting the cabinet matching the washbasin recessed profile.
550
RO SEM WB
ROUND
LOIRE 430 18
2 5 4 4 1 1
Mountingholes
45
RO SEM WB
Please use templates for fixing on table.
DANUBE
35
Mounting holes
235
235
45
0 6
10
0 9 3
0 1 1
10
0 7 1
0 3 1
5 7 4
155
500
45
35
0 7
SIZE
A
500 560
500 565
B
C
D
370 455
425 455
170 180
35 0 6
200 55 C
0 310 1
255
0 5 1
Pleaseuse templatesuppliedwitht his basinto fix ontable.
SA SEM WB MODENA
45
20
235
5 8 1
5 7 4
0 4 1
D
540 B A
2
Please use template for fixing on the table.
DA SEM WB GREENWICH
0 0
185
550
Please use template for fixing on the table.
GR SEM WB
SARA
Mounting holes
45
35
LO SEM WB
5 9 1
Mounting holes
Please use template for fixing on the table
LI SEM WB
s n i s a B d e s s e c e R i m e S
Back to Wall Closets
Back to Wall Closets TECHNICAL DETAILS DANIELA
Suitable also for top plug mounting fasteners seat covers O 15
0 7 3
mm
O 15
530
O56
0 7 2
0 6 1
Suitable also for top plug mounting fasteners seat covers
Box Rim Flush Inlet OD
mm
Outlet OD O102 0 1 3
100
O 0 7 3
0 6 1
0 0 4
P
118
S
Mounting holes for fixing LWC ‘P’ Traps only
RI BTW O 15 mm holes for Seat & Cover mounting
560 for ‘S’ Trap & 530 for ‘P’ Trap
Outlet OD 5 9 3
0 9 1
LINE
RHONE
‘S’ Trap (Vertical Outlet) = 115mm O 58
Inlet ID
Mounting screws for LWC ‘S’ Traps only
RO BTW SARA
495
530
420
0 5 7 8 2 3
0 6 1
5 9 3
5 4 2
0 6 1
5 9 3
5 5 7 7 2 3 0 9P 1
0 9 1
O 15 mm
LI BTW LOIRE
2- Mounting holes. Recommended fastener: 3 inchs x no:12 wood screws (Brass Preferred) with fischer plug.
Mounting with EWC mounting bracket kit
O 15 mm Suitable also for top plug mounting
fasteners of seat covers
0 6 1
O 58
Suitable also for top plug mounting fasteners seat covers
525
O / 15
Inlet ID
O100 0 7OutletOD 3
5 9 3
LO BTW
Inlet ID=58
440 555
0 6 1
0 5 6 4 2 3
335 This closey is fixed with mounting brackets. Please order seperately
SA BTW Outlet OD=102(4”) Box rim flush
TRIO
0 9 1
Mouting holes for fixing EWC with brackets for ‘P’Traps. only . Please order brackets seperately
TO BTW
s t e s o l C l l a W o t k c a B
Special Need WALLHUNG
Wallhung WC
Wash Basin with Ceramic Blank
Spatulla Lever Tap
Hinged Rail
Grab Bar
PP Soft Close Seat Cover
All in one pack
Dimensionsincm
348 ½
140
R
m 1
1m
1000
200
R½
0 7 1 1 0 10 400-
220
FFL
0
339
Push Button
BACT TO WALL WITH LL CISTERN FOR Special Need
BTW/LLC Pan For Special Need
LL Cistern For Special Need
Wash Basin
Back Rest
Brackets for LLC
Wave Fitings with Special Long Spatulla lever
Spatulla Lever Tap
Hinged Rail
Closet Fixing Screws/ UK made HD SC Wash Basin Type B with Steel Hinges for Fixing Kit & Ceramic Blank Special Need
Grab Bar
All in one pack
50
Concealed Cistern Wash Basin Type B Wave/ European make Fixing Kit
Special people, special needs. Safety and convenience with elegance and style for the loved ones that need it most
Special Need LAYOUT .
Special Need WALLHUNG
BACT TO WALL WITH LL CISTERN FOR Special Need 495 445
O 102 Inlet ID 0 6 1
0 6 1
7 5 4
0 0 9 7 2 3
0 9 1
100
O16 Inlet ID
Flush system options: 1. Inline flush valve (1-1/4” pipe line to be made from storage tank) 2. Low level hide away cistern with small push button 3. Hide away cistern with complete frame & large push button
Installation Lay out for Back To Wall Physically Handicapped Persons
Installation Lay out for WallHung Physically Handicapped Persons 1000 850 1000 850 1000
850
850
360
250
500
250
200
200 0 0 2
0 0 8
5 0Including 9 8 Seat Cover 3 4
0 0 7
0 0 5
0 0 5
0 0 8
0 0 2
85 0 7 3
0 5 3
500
1000
0 7 3
MIN 365 MAX 385 0 5 3
525
0 0 0 1
0 5 1
0 0 5 1
250 2200 0 0 7
850 750+140 to 160
0 4 7 o t 0 2 7
5 0 Including 5 8 Seat Cover 4 4
MIN 390 MAX 410
500
0 0 0 1
0 5 1
600-700
0 0 7
0 0 5 1
600-700
250 2200 0 0 7
850 750+140 to 160
0 4 7 o t 0 2 7
T C U D O R P d e e N l a i c e p S
Special Need COUPLED CLOSET
Coupled Closet
Ceramic Blank
NEW COUPLED CLOSET FOR Special Need
Coupled Closet
Ceramic Blank
Wash Basin
Wave Fitings with Special Long Spatulla lever
Spatulla Lever Tap
Closet Fixing Screws/WashBasin Type B Fixing Kit
Hinged Rail
Grab Bar
PP Soft Close SC
All in one pack
Wash Basin
Spatulla Lever Tap
Hinged Rail
Grab Bar
European fittings with Push Button
Closet Fixing Screws/Wash Basin Type B Fixing Kit
Front Open PP Soft Close SC For Special Need
All in one pack
Special Need LAYOUT Special Need COUPLED CLOSET
Special people, special needs. Safety and convenience with elegance and style for the loved ones that need it most
NEW COUPLED CLOSET FOR Special Need
This closet is available with horizontal ‘P’ trap. Flexible conversion bend can be supplied if required for connection through floor.
Out let
750 Suitablealsofortopplug
102(4”)
15
Box rim flush 27 Two inlet holes as choice.
mountingfasteners of seat & cover
425 335
Box rim flush
0 4 8
440
5 2 8
335
130
0 2 5
5 5 1
0 5 9 8 2 3
0 9 1
190 750
16
t a e s t u o h t i W
t a e s h t i
0 4 4
0 6 4
W
0 4 7
5 7 4
0 4 2
0 6 1
0 6 3 0 6 4
0 9 1
Mounting holes of dia: 10mm two on each side. To mount with mounting bracket kit.
9 mm .
1000 850
1000 850 250
B
0 0 2
C
850
0 8 4
500
250 200
5 8 3
0 5 1
1000
View on B-B
A
0 0 5
0 5 3
850
0 1 8
0 0 0 0 8 7
200
A
1000
500
Colostomy Bag Changing Shelf for Ambulant User s 950 mm above Floor Level
MIN140 MAX160
0 0 5
0 0 8
0 0 2
600-700
750
Hinged Support Rail
0 0 0 1
Pull Rail Fixed to Door
0 6 3
0 0 5 1
0 5 3
C 250 850
Wash Basin
750+140 to 160
0 0 6 8 4 4
MIN 150 MAX 180
750
Including SeatCover
0 0 0 1
0 5 1
0 0 7
B
5 2 8
0 0 7
0 0 5 1
600-700
0 4 7 o t 0 2 7
2200
250
Typical Installation Plan
2200
View on A-A
0 0 7
850 750+140 to 160
0 4 7 o t 0 2 7
T C U D O R P d e e N l a i c e p S
Boston Single Piece
Boston Single Piece
TECHNICAL DETAILS
Give your bathroom an American look by using the single piece water closet with integral tank.
This closet is Siphonic Closet. Water Rises in the bowl prior to fl ush and emptied by Suction action Trap outlet size is 60mm OD and 45mm ID. Flushes from rim with out additional rim fl ush inlet valve.
0 9 5 5 9 3
290
Dia 15 mm holes Suitable for top Plug mounting 740
435
5 3 4
0 6 1
Normal Inlet for 21 inch connection on left of tank seen from front. Alternative Right inlet can be given on request.
BO WC ST
5 5 9 9 3 2
e c e i P e l g n i S n o t s o B
Lincoln Elite
TECHNICAL DETAILS
Lincoln Elite
Front flush handle available with ornate ceramic knob.
Customers can choose color of the
knob f rom
our standard colors.
15 680
a touch of traditional class and grandeur to usher in royal elegance into your bathrooms
430
5 8 4
0 0 3
0 6 1
0 9 3
0 7 7
Box rim flush
5 9 3
0 9 1
4-mounting holes
30x20
280
LN EL WB 601 LN EL TK
35
45 205
5 6 5 5
5 9 1 0 4 6
ChainHole
0 0 5
e t i l E
440 600
LN EL FP
LN EL WC S/P
5 2 8
0 1 3
260
n l o c n i L
Smart
Smart
TECHNICAL DETAILS
a mix of tradition and contemporary minimalistic style to give a retro look to your private space 45
35
5 8 4
0 4 6
0 4 8
200
590
700 425
0 8 3
LS SM WB 590
0 6 1
0 5 0 7 3 3
40
LS SM TK
0 6 3
15
Open Rim Flush 0 2 8
0 1 4
0 9 1
LS SM FP
LS SM WC PT
t r a m S
asian pans
asian pans TECHNICAL DETAILS Foot rest raised for deep pan only
Corners are straight for shallow pan and rectangular pan
30 5 5
390
C
50 100 B
Model
A
B
Deep
540
435
295
Medium
495
405
210
Shallow
500
400
135
540
435
295
Rectangle Corners cut for deep & medium pans
A
ASHT
180
32 10
0 4 5 1
10 85
C
25
2 3
230
0 3
100
70
5 9 2
2 1 2
Convertion Bend ‘S’ 205 395 50
Convertion Bend ‘P’ ASWCDP Normal inlet hole is at the left side of the tank and operating lever is at the right side seen from front of the tank. Holes can be interchanged on special request in the customers purchase order. Two holes of dia 10mm are for retention purpose only. These shall not be used for bearing the load of the tank. Tank should rest on mounting brackets for increased safety. Overflow is through the outlet valve centre tube and over flow water on failure of inlet valve disc harges into the pan.
s n a p n a i s a
Coupled Closet
Andromeda
Zurich
Madrid
Florence
Wales
Vienna
Savoy
Lincoln
Coupled Closet
Milano
Bali
Compact
Rhine New
Modena
Danube
Loire
Sea Shell
) g n u H l l a W / e c e i P e l g n i S / C C (
n o i t c e l e S t e s o
Coupled Closet
Charente
Domino New
Sara
Aquasave
Greenwave
Preserve
Children’s
Smart
Wall Hung S i n g l e P i e c e
Boston
Vienna
Zurich
Domino
Loire
New york
Fifa
Alps
Victory
Lounge
) g n u H l l a W / e c e i P e l g n i S / C C (
n o i t c e l e S t e s
Urinals
URPT
URBWL
UREC
URDN
URFB
Bowl With Spreader
Dunny Eco
Urinal Dunny Concealed
Wave Flat Back
Urinals TECHNICAL DETAILS BOWL
DUNNY ECO 280
315
300
225
26 / 22
280
O8
8 1 4
mm
0 1 4
205 435
90
90
O 16 O 50
URINAL-DUNNY 285
mm
mm
WAVE FLAT BACK 225
270
Inlet dia O 22 mm
215
O
8 mm
5 3 5
5 6 3
O
50 mm
O
0 0 1
15 mm
215 60
75
345 O
O 65
mm
65 mm
360
URINAL-TANK 0 0 3
Mounting hook Please see note: 1
250
Auto siphon of lengths from 6” to 8”
5 3 2
Hole for water inlet through 0.5 cock p lease see note: 2 140 340
130 Opening at top 40
*Urinal Tank Fittings / Auto syphon / Spreader to be ordered seperately
Hole at bottom for auto siphon mounting
Auto siphon outlet size of 1” flush pipe size of 0.25”
210
URTK
URPT
Urinal High Level Tank With Auto Siphon
Urinal Partition
s l a n i r U
Bath Tubs
Spa
Relax
Shower Enclosures
BTSH10 1700 X 700 X 390 mm
BTSH09 1700 X 700 X 390 mm
BTSH12 900 X 900 X 1950 mm
BTSH13 900 X 900 X 1950 mm
Corner Square
Corner Curved
Arcylic Shower Trays
BTSH11 800 X 800 X 150 mm
Ceramic Shower Trays
BTSH05 720 X 720 X 90 mm
Curve
BTSH07 800 X 800 X 150 mm
Square
BTSH02 800 X 800 X 90 mm
s e r u s o l c n E r e w o h S d n a s b u t h t a B
VIENNA/ZURICH/VICTORY
MADRID/WALES/FIFA
PP Soft Close Seat Cover
MILANO/BOSTON/SAVOY/DANUBE/FLORENCE CHARENTE/ROMA/ANDROMEDA/LINCOLN
LOUNGE
LOIRE/BALI/MODENA/RHONE COMPACT/RHINE/DOMINO/DANIELA
SARA/AQUASAVE/ GREENWAVE/PRESERVE/SMART
Range of SeatCovers PP Non Soft Close Seat Cover LOIRE/BALI/COMPACT
SHELL
ROMA
HD Non Soft Close Seat Cover MILANO/BOSTON/SAVOY/DANUBE/FLORENCE CHARENTE/ROMA/ANDROMEDA/LINCOLN
LOIRE/BALI/MODENA/RHONE COMPACT/RHINE/DOMINO /DANIELA
Special Need Seat Cover FRONT OPEN PP SOFT CLOSE SC FOR SPECIAL NEED
UK MADE HD SC WITH STELL HINGES FOR SPECIAL NEED
PP SOFT CLOSE FOR NEW COUPLED CLOSET FOR SPECIAL NEED
PP SOFT CLOSE/ NON SOFT CLOSE/ HD NON SOFT CLOSE FOR SPECIAL NEED WALLHUNG
s r e v o C t a e S f o e g n a R
ACWHACDASH Dimensions in cm
Danube Shelf
348
R
140
½
200
½
R
ACWHACSDSL
1000 1m
Soap Dish - Big
1m
Soap Dish - Small 0 7 1 1
0
400-10
ACWHALPH
220
ACWHACRH
0
Toilet Paper Holder
Robe Hook
FFL
339
Towel Rai l
50
ACWHACTESF TKFTO16
HIDE AWAY FITTINGS FOR WALL HUNG TKFT0031 TKFT044
TKFT003 TKFT002
WAVE - HIGH LEVEL FITTING
GEBRIT MAKE DUAL FLUSH
WAVE DUAL FLUSH
WAVE SINGLE FLUSH
Accessories & Fittings SHATTAF
METAL SHATTAF APMTSH
PEC Connector Bend
TKFT020
FITTING FOR BOSTON SINGLE PIECE
Rubber Bung
WALES CHROME APCRWASH
LOIRE WHITE APWHLOSH S-Trap Ceramic Convertion Bend TKFT015
WIRQUIN(FRENCH MAKE) DUAL FLUSH
MILANO CHROME APCRMISH
SARA WHITE APWHSASH
SARA CHROME APCRMASH
s g n i t t i F & s e i r o s s e c c A
INSTRUCTIONS FOR WATER CLOSETS AND CISTERN FITTINGS INLET VALVES WATER PIPING 1. Normally all our fitti ngs come with inlet valve to match with ½” connectors. If the connections in the building have 3/8” for any reason, a reducer of ½” x 3/8” shall be used. 2. All our close coupled cisterns come with the inlet at the bottom at the left of the tank seen from front of the closet. If the inlet is required on right side of the tank special mention shall be made in the order. As the tank with right inlet is not kept in stock, a lead time of at least 2 weeks shall be allowed for delivery. 3. Provision of an angle valve of good quality before the Cistern inlet is very important for maintenance of closet cisterns 4. Use of flexible connector with Stainless Steel Braiding is more useful than using rigid connectors of copper pipe etc. for ease of maintenance and reliable leak proof connection. It will be very difficult for the plumbers to do any repair work on the cistern inlet if the rigid pipes are used. They break in few operations and also damage the thread on inlet valves.
WATER PRESSURE All our cistern fittings sets have inlet valves with servo operation. The advantage with this kind of valves is that the valves remain open with full flow until final level is reached. This will ensure quick refilling of the tank after flushing operation. The normal float lever operated valves slowly reduce the flow rate as the level in the tank rises. This causes very slow refilling of the tanks. However, all the servo operated valves need minimum of 3 meters of water head above the Cistern level. If the overhead tanks supplying water to the cisterns is less than 3 meters, the inlet valves either do not open at all or if they are open, they will not close again. It is therefore very important to check pressure available at the cistern inlet before asking for these fittings. If the pressure is definitely less due to improper planning of pipelines, position of over head tanks or due to the proximity of the overhead tank (like the last floor in a multistorey building) only the float lever operated valves shall be chosen. Please mention this to our sales staff for proper advice.
The piping from over head tank to the Cisterns shall be at least one size higher than the Cistern inlet size. For example the angle valve used for connection to cistern is ½”, the piping from overhead tank to the valve shall be at least ¾”. If more branches are taken from the same pipe the pipe size shall be even bigger like 1”. It is tendency of some plumbers to use only ½’ size pipe from overhead tank to all the points to reduce cost. This will seriously impair the function of all the inlet valves. If the servo operated inlet valves are used with such slow flow rate line they will not stop when the level is reached in the cistern. The float lever operated valves take very large time to refill the tank. If the same pipe is used for supply form overhead tank to all the floors in multistorey buildings, the bottom most floor get very good pressure and the topmost floor do not get any pressure when the bottom floor taps are opened. It is always preferable to use different branch piping from the overhead tank to each floor.
HEATING OF WATER IN THE PIPES DUE TO SUNLIGHT If the water piping from over head tanks to the toilets is left exposed to direct sunlight, the water temperature in the pipelines rises to as high as 80C during summer. This water when entered in the cistern will spoil all the plastic and rubber parts of the cistern fittings. It is therefore recommended to conceal all the pipe lines with out exposure to direct sunlight.
USE OF CHEMICALS Excessive chlorination of water used for toilets will spoil all the plastic and rubber parts of the cistern fittings. Only moderately chlorinated water shall be used for toilets for prolonged life of toilet fittings.
S N O I T C U R T S N I
SCALING OF WATER IN THE CISTERNS Water with heavy calcium content will slowly scale and form deposits in the cistern. The Inlet valve in our Cistern fittings set also comes with a filter. This filter also may get clogged in due course due to scaling. It is necessary to clean this fi lter at the bottom of the inlet valve by opening the connection to the inlet valve. The filter can be cleaned by dipping in mild toilet cleaning acid. The scaled deposits in the cistern and on the flush valve cause the flush valve to continuously leak. It is necessary to add small amount of mild toilet cleaning acid to the water in the cistern and flush 4 to 5 times so that all the scales are completely dissolved. This operation shall be done only when necessary. Frequent cleaning of cistern parts with acid or chemicals will spoil the plastic and rubber parts of cistern fittings.
FIRST FLUSHING OF OVERHEAD TANKS AND PIP ES All the pipes in building construction collect lots of dust and sand during the process of installation and storage. The over head tanks also may collect sand and dirt during installation and storage. If the dust and sand from the overhead tank and pipes enter the cistern fittings, the fittings will not function as the fine sand will block the filters, small holes of servo mechanisms etc. The sand also will come in between the rubber seal and seats of inlet and outlet valves and cause continuous leakage. It is important to flush all the pipe lines and over head tanks properly with enough water before connecting the pipes to cisterns.
ADJUSTMENT OF CISTERN WATER LEVEL All our cistern fittings come with adjustable floats to correctly adjust the level in the cistern. A red coloured Lock is provided on the stem of the inlet valve. Press this down to hear click sound. Disengage the threaded bar from the float by turning it thinner side to the front side. Pull the Float chamber up or down according to the level required. Lock the float mechanism on the stem with the red lock. Re-engage the float screw in to the float by keeping it pressed down. The float shall freely lift and fall after engaging the screw in to it. If this is not free, water will continuously leak even after the level is reached in the tank. In case of doubt please ask our representatives in your area. They shall assist you in correctly adjusting the level.
OUT LET VALVES – DUAL FLUSH AND SINGLE FLUSH There is a choice of out let valves regarding flush operations. We can supply cistern fittings with only with single flush or with Dual flush valves also. Dual flush valves are useful where toilets are also used as urinals in saving water. In these fittings one low flush button and one high flush button are provided separately. Pushing of low flush button discharges small amount of water (3 or 4 liters) when the toilet is used as Urinal. Pushing of High volume button ensures full discharge of water (6 or 8 liters) when the toilet is used in normal way. The discharge volume is also adjustable in our fittings. Please refer to the instructions sheet supplied with the fittings. Dual flush valves save water where the toilets are often used only for urinal purpose. However, both plumbers and end users must fully understand about their function and use properly. Please ask for detailed presentation if needed.
STORAGE OF FITTINGS BEFORE I NSTALLATION All our cistern fittings contain Plastic or Rubbers parts. These parts are sensitive to direct sunlight. The Plastic parts become brittle when kept under sunlight for longer time. Application of even little tightening force will break the parts after exposure to direct sunlight. Rubber parts become hard due to heat and loose their sealing abilities causing leakages after installation. It is therefore recommended to keep the fittings inside their cartons until use and store them under shade. Also, if the fittings are stored along with other building materials, the dirt and sand enter the parts and damage the parts. The sand and dirt come in the sealing areas and cause leakages. Also, Plastic parts can get compressed and loose their shape. Care shall be taken in storing the fittings to avoid damages.
USE OF PROPER TOOLS AND PROPER TIGHTENING FORCES Only proper tools shall be used in tightening the nuts on inlet and outlet valves of Cistern fittings. Using pipe wrenches and over tightening them causes damages to the fittings. Fittings crack due to this and leak in usage.
USE OF SILICONE SEALANT
All the fittings are supplied with proper rubber sealing washers. Proper usage and sufficient tightening will ensure no leakages in all cases. If there is a leakage, there must be serious problem with some parts of the fittings or the Ceramics ware. Please investigate and resolve the problem. Silicone sealant can react with the plastics and cause slow damage. Also, the loose streaks of silicone can be carried to the small holes in the inlet and outlet valves and block them. Avoid using silicone sealant on any plastic parts. If required this may used only for dressing the gaps between the Ceramic ware and walls or floors.
items. The concealed cisterns are assembled inside the recess in the brick wall and front side is panelled with waterproof plywood or Plastic panels etc. If required these panels also can be covered with tiles to merge with the remaining walls. In line flush valves are also of good option. However, these valves come with 1 ¼” connection. The piping from the Over head tank also shall be of same size for correct flushing in this case. Smaller piping of 1/2” of ¾” will give improper flushing.
CARE IN HANDLING CABLE OPERATED OUTLET VALVE FITTINGS SEAT AND COVER FIXING FOR THE BACK TO WALL CLOSETS Some of our Fittings come with Cable operated outlet valves. Care shall be taken during handling of cable to prevent permanent bending of cable. The permanently twisted cable will not move freely in the cable guide tube and the flush valves will not close properly after flush due to this. Even during the maintenance, the shall not be allowed to hang on the cable, the cable shall be detached from the knob for removal of the lids.
SELECTION OF WATER CLOSETS The S- Trap Close coupled water closets perform well in flushing compared to any other types. S- Trap closets need pre-planning of the drain piping in the floor. P- Trap Closets are very useful for quick and easy installation as the drain pipe can be taken out of the wall by making the hole as and when required without much pre-planning. However, it is always required to keep the closet with its back to the outer v s. Any other place other than outer wall requires long ducting. Where there is limitation of space, Back to wall closets can be selected. Wall hung closets allow cleaning access to all the toilets area. However, back to wall or wall hung closets shall be chosen where there are plumbing skills and engineering support is available as the cisterns need to be kept inside the walls.
CISTERNS FOR BACK TO WALL AND WALL HUNG CLOSETS There are several options of cisterns for Back to wall and Wall closets available. Concealed Cisterns with ready made frames, Only concealed cisterns, In line flush valves etc., are the options available. Concealed cisterns with ready made frames are the best choice as they come along with complete set of items including outlet pipes, inlet pipes fixing fasteners, dual flush tanks with large and styled push buttons. Plumbers can directly install without the need to purchase any other
Back to wall Closets and some models of Close coupled closets come with their back side completely closed. There is no access for fixing of seat and cover screws in these closets after installation. Only special top mounting fasteners shall be used for the seat covers of such closets. Even the inlet and outlets for such closets shall be fixed with slide on rubber seals or bushes. Otherwise maintenance will be very difficult.
MOUNTING OF EUROPEAN WATER CLOSETS There are two different methods of mounting of European water closets. One method is using screws directly in to the mounting holes. In another method, first a brackets are fixed to the floor and screws are inserted from the side of EWC and tightened. The mounting method is fixed for a model and the model drawing includes the detail of mounting method. Please check with our sales personnel in case of doubt.
S N O I T C U R T S N I
INSTALLATION OF WASH BASIN WITH SCREW MOUNTING (TYPE - A)
PARTS LIST
1. Wash basin is mounted on its pedestal and hole places are marked on the wall. 2. 12mm. Hole is drilled on marked places and O12 plug is mounted. 3. The screw is squeezed in to the plug 4. Wash basin is mounted on to plastic bushings and then M10 nut is tightened with a spanner.
INSTALLATION OF WASH BASIN WITH OUT MOUNTING SCREWS (TYPE - B)
M8
Instructions for Installation 1. Place the wash basin against the wall and mark the place on wall where mounting brackets are to be located. 2. Drill two mounting holes of O20mm of minimum 85 mm depth at a centre distance as per the table below. Wash Basin Model
Hole Centre distance -B
Danube, Rhine- 580mm
190mm
Danube, Rhine- 650mm
260mm
Danube, Rhine- 450mm
165mm
Charente 580 & 650mm
80mm
Sea Shell
260mm
Andromeda wall hung basin 000mm 3. Insert the Fischer sleeve in to the holes.
4. Now take the M12 Bolt and insert the mounting clamp and plain washer on the bolt and screw the bolt in to the FICHER SLEEVE such that the bottom portion of clamp just touches the wall. 5. Now take the wash basin and place it against the wall above the clamp portion and slide it down till it rests snugly between the wall and the rubber pads of the clamp. 6. Now tighten the bolts fully to get firm mounting of the basin. Avoid over tightening, which can result in\damaging the wash basin.
N O I T A L L A T S N I
INSTALLATION OF CLOSET AND BIDET (TYPE-A)
PARTS LIST
INSTALLATION OF CLOSET AND BIDET (TYPE-B)
PARTS LIST
N O I T A L L A T S N I
INSTALLATION OF WALL HUNG CLOSET / BIDET
PARTS LIST
INSTALLATION OF ANDROMEDA WB (TYPE-B)
MOUNTING CLAMP BOLT
MS CLAMP (40X5)
1. Place the brackets against the wall and mark the place on wall where wash basin is to be fixed. 2. Drill four mounting holes of 15mm dia of minimum 50mm depth at centre distance of brackets 230mm from floor 590mm. 3. Insert the Fischer sleeve in to the holes. 4. Now take the M-8 bolt and fix the mounting brackets on the wall and tighten all bolts. 5. Place the wash basin on floor. Take the 2long hexagonal bolts with plain washer and rubber washer. Insert the bolts in to side hole of wash basin and then hand tighten. 6. Fix the fittings including water and drain connections. 7. Then push the basin towards wall (from A) and tighten both side bolts with spanner. Insert plastic cap on bolt head. CAUTION- The wash basin is heavy and it is recommended that two persons, hold it while it is being fixed
N O I T A L L A T S N I
Factory and Head Quarters / Showroom (Sohar)
OMAN CERAMICS CO. S.A.O.G P.O.Box - 46, P.C - 327, Road No .9, Sohar I ndustrial E state, Sulta nate of Oman Tel: + 968 26751317, 26751332, Fax: + 968 26751280 e-mail :
[email protected] www.omanceramics.com www.omanceramics.co.uk
Branches
UNITED ARAB EMIRATES Ajman Branch, Office No : D6 P.O.Box - 21149 Ajman Free Zone, U.A.E
MUSCAT SHOWROOM Muscat Building Wadi Kabir Round About, Muscat Sultanate of Oman Tel: 24811906 Fax: 24817928
BAHRAIN Flat No 13, Bldg No 832, Road No 611, Block 306, Manama, Kingdom of Bahrain
UK
T C A T N O C